• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.2
• /
• pp.41-48
• /
• 2018

The quantitative interfacial adhesion energy measurement method of copper redistribution layer and WPR dielectric interface were investigated using $90^{\circ}$ peel test, 4-point bending test, double cantilever beam (DCB) measurement for FOWLP Applications. Measured interfacial adhesion energy values of all three methods were higher than $5J/m^2$, which is considered as a minimum criterion for reliable Cu/low-k integration with CMP processes without delamination. Measured energy values increase with increasing phase angle, that is, in order of DCB, 4-point bending test, and $90^{\circ}$ peel test due to increasing roughness-related shielding and plastic energy dissipation effects, which match well interfacial fracture mechanics theory. Considering adhesion specimen preparation process, phase angle, measurement accuracy and bonding energy levels, both DCB and 4-point bending test methods are recommended for quantitative adhesion energy measurement of RDL interface depending on the real application situations.

• Safety and Health at Work
• /
• v.6 no.3
• /
• pp.206-210
• /
• 2015

Background: Fatigue has a strong impact on workers' performance and safety, but expedient methods for assessing fatigue on the job are not yet available. Studies discuss posturography as an indicator of fatigue, but further evidence for its use in the workplace is needed. The purpose of the study is to examine whether posturography is a suitable indicator of fatigue in clerical workers. Methods: Thirty-six employees (${\emptyset}$ 34.8 years, standard deviation = 12.5) participated in postural tasks (eyes open, eyes closed, arm swinging, and dual task) in the morning and afternoon. Position of their center of pressure (COP) was registered using a Nintendo Wii Balance Board and commercial software. From registered COP time series, we calculated the following parameters: path length (mm), velocity (mm/s), anterior-posterior variance (mm), mediolateral variance (mm), and confidence area ($mm^2$). These parameters were reduced to two orthogonal factors in a factor analysis with varimax rotation. Results: Statistical analysis of the first factor (path length and velocity) showed a significant effect of time of day: COP moved along a shorter path at a lower velocity in the afternoon compared with that in the morning. There also was a significant effect of task, but no significant interaction. Conclusion: Data suggest that postural stability of clerical workers was comparable in the morning and afternoon, but COP movement was greater in the morning. Within the framework of dynamic systems theory, this could indicate that the postural system explored the state space in more detail, and thus was more ready to respond to unexpected perturbations in the morning.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.6 no.1
• /
• pp.43-67
• /
• 1969

The effect of a circular hole reinforced by a ring of different material in a plate under biaxial loadings is considered. In this problem, an infinitely large flat is assumed. The reinforcing ring is of uniform rectangular cross-section of same thickness as the plate. The outer boundary of the ring is cemented to the inner boundary of the hole in the plate. The plate is subjected to hydrostatic tension and pure shear loadings. The stress distribution around the hole is obtained by means of the two dimensional theory of elasticity. To conform the validities of above solutions, a series of photo-elastic stress analysis for a composite model was carried out. Fair agreements were observed between two sets of values. The conclusions arrived at are as follows: 1) The theoretical solutions are exact ones for the case of infinitely large flat plate. 2) The solutions can be used for most case of engineering problem if the bonding between the plate and ring is perfect. 3) If the ratio of Young's moduli of the ring and the plate is increased, the stresses in the plate decrease whereas those in the ring increase. 4) The stress concentration near the hole has localized effect. 5) Under hydrostatic tension, maximum principal stress and maximum shear stress increase as the ratio of inner and outer diameters of the ring increases. 6) Under pure shear, the stresses depend upon angular orientations of the points and maximum principal stress and maximum shear stress appear at 45 degree. They increase as the ratio of inner and outer diameters of the ring increases.

• Safety and Health at Work
• /
• v.9 no.2
• /
• pp.140-143
• /
• 2018

Background: The Occupational Safety and Health Monitoring and Assessment Tool (OSH-MAT) is a practical instrument that is currently used in the German woodworking and metalworking industries to monitor safety conditions at workplaces. The 12-item scoring system has three subscales rating technical, organizational, and personnel-related conditions in a company. Each item has a rating value ranging from 1 to 9, with higher values indicating higher standard of safety conditions. Methods: The reliability of this instrument was evaluated in a cross-sectional survey among 128 companies and its validity among 30,514 companies. The inter-rater reliability of the instrument was examined independently and simultaneously by two well-trained safety engineers. Agreement between the double ratings was quantified by the intraclass correlation coefficient and absolute agreement of the rating values. The content validity of the OSH-MAT was evaluated by quantifying the association between OSH-MAT values and 5-year average injury rates by Poisson regression analysis adjusted for the size of the companies and industrial sectors. The construct validity of OSH-MAT was examined by principle component factor analysis. Results: Our analysis indicated good to very good inter-rater reliability (intraclass correlation coefficient = 0.64-0.74) of OSH-MAT values with an absolute agreement of between 72% and 81%. Factor analysis identified three component subscales that met exactly the structure theory of this instrument. The Poisson regression analysis demonstrated a statistically significant exposure-response relationship between OSH-MAT values and the 5-year average injury rates. Conclusion: These analyses indicate that OSH-MAT is a valid and reliable instrument that can be used effectively to monitor safety conditions at workplaces.

• Nuclear Engineering and Technology
• /
• v.55 no.2
• /
• pp.566-574
• /
• 2023

Investigating the seepage characteristics of the leaching solution in the ore-bearing layer during the in situ leaching process can be useful for designing the process parameters for the uranium mining well. We prepared leaching solutions of four different viscosities and conducted experiments using a self-developed multifunctional uranium ore seepage test device. The effects of different viscosities of leaching solutions on the seepage characteristics of uranium-bearing sandstones were examined using seepage mechanics, physicochemical seepage theory, and dissolution erosion mechanism. Results indicated that while the seepage characteristics of various viscosities of leaching solutions were the same in rock samples with similar internal pore architectures, there were regular differences between the saturated and the unsaturated stages. In addition, the time required for the specimen to reach saturation varied with the viscosity of the leaching solution. The higher the viscosity of the solution, the slower the seepage flow from the unsaturated stage to the saturated stage. Furthermore, during the saturation stage, the seepage pressure of a leaching solution with a high viscosity was greater than that of a leaching solution with a low viscosity. However, the permeability coefficient of the high viscosity leaching solution was less than that of a low viscosity leaching solution.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.40-51
• /
• 1991

A Propeller design method using the newly developed blade section(KH18), which behaves better cavitation characteristics, is presented. Experimental results for two-dimensional foil sections show that the lift-drag curve and the cavitation-free bucket diagram of the new blade section are wider comparing to those of the existion NACA sections. This characteristic of the new section is particularly important for marine propeller applications since angle of attack variation of the propeller blade operating behind a non-uniform ship's wake is relatively large. A lifting surface theory is used for the design of a propeller with the developed section for a 2700 TEU container ship. Since the most suitable chordwise loading shape is not known a priori, chordwise loading shape is chosen as a design parameter. Five propellers with different chordwise loading shapes and different foil sections are designed and tested in the towing tank and cavitation tunnel at KRISO. It is observed by a series of extensive model tsets that the propeller(KP197) having the chordwise loading shape, which has less leading edge loading at the inner radii and more leading edge loading at the outer radii of 0.7 radius, has higher propulsive efficiency and better cavitation characteristics. The KP197 propeller shows 1% higher efficiency, 30% cavitation volume reduction and 9% reduction of fluctuating pressure level comparing to the propeller with an NACA section. More appreciable efficiency gain for the new blade section propeller would be expected by reduction of expanded blade area considering the better cavitation characteristics of the new blade section.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.3
• /
• pp.205-215
• /
• 2004

The characteristic ratio assignment (CRA) method〔1〕 is new polynomial approach which allows to directly address the transient responses such as overshoot and speed of response time in time domain specifications. The method is based on the relationships between time response and characteristic ratios($\alpha_i$ ) and generalized time constant (T), which are defined in terms of coefficients of characteristic polynomial. However, even though the CRA can apply to developing a linear controller that meets good transient responses, there are still some fundamental questions to be explored. For the purpose of this, we have analyzed several sensitivities of a linear system with respect to the changes of coefficients itself and $\alpha_i$ of denominator polynomial. They are (i) the unnormalized root sensitivity : to determine how the poles change as $\alpha_i$ changes, and (ii) the function sensitivity to determine the sensitivity of step response to the change of o, and to analyze the sensitivity of frequency response as o, changes. As an other important result, it is shown that, under any fixed T and coefficient of the lowest order of s in denominator, the step response is dominantly affected merely by $\alpha_1, alpha_2 and alpha_3$ regardless of the order of denominator higher than 4. This means that the rest of the$\alpha_i$ s have little effect on the step response. These results provide some useful insight and background theory when we select $\alpha_i$ and T to compose a reference model, and in particular when we design a low order controllers such as PID controller.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.6
• /
• pp.2947-2951
• /
• 2016

A quasi-experimental study was conducted to develop a health education modification program based on self-efficacy and motivation regarding liver flukes and cholangiocarcinoma development in Keang Sanam Nang district, Nakhon Ratchasima province, Thailand. A total of 36 individuals were invited to participate in the program and were screened for population at risk of liver fluke infection and cholangiocarcinoma using SUT-OV-001 and SUT-CCA-001. Development of health education modification program regarding liver fluke and cholangiocarcinoma prevention included 3 steps: (1) preparation, (2) health education program, and (3) follow-up and evaluation. The study was implemented for 10 weeks. Pre-and-post-test knowledge was measured with questionnaires, Kuder-Richardson-20: KR-20 = 0.718,and Cronbach's Alpha Coefficient = 0.724 and 0.716 for percection and outcome expectation questionnaires. Paired and independent t-tests were applied for data analysis. The majority of the participants were female (55.6%), aged between ${\leq}50$ and 60 years old (36.1%), married (86.1%), education level of primary school (63.9%), agricultural occupation (80.6%), and income <4,000 Baht (44.4%). The results revealed that after the health education program, the experimental group had a mean score of knowledge, perception, and outcome expectation regarding liver fluke and cholangiocarcinoma prevention significantly higher than before participation and in the control group. In conclusion, this successful health education modification program for liver fluke and cholangiocarcinoma, therefore may useful for further work behavior modification in other epidemic areas.

• Current Applied Physics
• /
• v.18 no.12
• /
• pp.1496-1506
• /
• 2018

Organic/inorganic ultraviolet photodetector was fabricated using thermal evaporation technique. Organic/inorganic heterojunction based on thermally evaporated copper (II) acetylacetonate thin film of thickness 200 nm deposited on an n-type silicon substrate is introduced. I-V characteristics of the fabricated heterojunction were investigated under UV illumination of intensity $65mW/cm^2$. The diode parameters such as ideality factor, n, barrier height, ${\Phi}_B$, and reverse saturation current, $I_s$, were determined using thermionic emission theory. The series resistance of the fabricated diode was determined using modified Nord's method. The estimated values of series resistance and barrier height of the diode were about $0.33K{\Omega}$ and 0.72 eV, respectively. The fabricated photodetector exhibited a responsivity and specific detectivity about 9 mA/W and $4.6{\times}10^9$ Jones, respectively. The response behavior of the fabricated photodetector was analyzed through ON-OFF switching behavior. The estimated values of rise and fall time of the present architecture under UV illumination were about 199 ms and 154 ms, respectively. Finally, enhancing the photoresponsivity of the fabricated photodetector, post-deposition plasma treatment process was employed. A remarkable modification of the device performance was noticed as a result of plasma treatment. These modifications are representative in a decrease of series resistance and an increase of photoresponsivity and specific detectivity. The process of plasma treatment achieved an increment of external quantum efficiency from 5.53% to 8.34% at -3.5 V under UV illumination.

• Journal of the Korean earth science society
• /
• v.31 no.5
• /
• pp.500-520
• /
• 2010

The purposes of this case study were (1) to explore one experienced teacher's views on Earth Systems Education and (2) to describe and document the characteristics of the Earth Systems Education (ESE) curriculum provided by an exemplary middle school science teacher, Dr. J. All the essential pieces of evidence were collected from observations, interviews with the experienced teacher and his eighth grade students, informal conversations, document analysis, and field notes. The $NUD^*IST$ for MS Windows was used for an initial data reduction process and to narrow down the focus of an analysis. All transcriptions and written documents were reviewed carefully and repeatedly to find rich evidence through inductive and content analysis. The findings revealed that ESE provided a conceptual focus and theme for organizing his school curriculum. The curriculum offered opportunities for students to learn relevant local topics and to connect the classroom learning to the real world. The curriculum also played an important role in developing students' value and appreciation of Earth systems and concern for the local environment. His instructional strategies were very compatible with recommendations from a constructivist theory. His major teaching methodology and strategies were hands-on learning, authentic activities-based learning, cooperative learning, project-based learning (e.g., mini-projects), and science field trips. With respect to his views about benefits and difficulties associated with ESE, the most important benefit was that the curriculum provided authentic-based, hands-on activities and made connections between students and everyday life experiences. In addition, he believed that it was not difficult to teach using ESE. However, the lack of time devoted to field trips and a lack of suitable resource materials were obstacles to the implementation of the curriculum. Implications for science education and future research are suggested.