• 대한기계학회논문집
• /
• 제13권2호
• /
• pp.252-256
• /
• 1989

본 연구에서는 탄성-소성 피로파괴 시험을 하여 dN/dn과 .DELTA.J의 관계와 dN/과 da/dn의 관계에 대한 실험식을 얻고 이론적인 해석결과와 비교 검토하고자 한다.

• 한국산학기술학회논문지
• /
• 제6권6호
• /
• pp.542-546
• /
• 2005

연성 크랙의 발생 평가를 위한 J-적분이 충격 하중을 받는 탄소성 3점 굽힘 시험편들에 대하여 연구한다. J-적분을 측정하고 평가하는 실험적인 방법이 연구되었으며 이 결과가 유한 요소법을 이용한 탄소성 이론 해석을 한 값들과 비교하여 거의 일치함을 보였다. 이론적인 수치 해석으로서도 본 연구의 유한 요소 모델로서 J-적분값을 계산할 수 있으며 삼점 굽힘 시험편의 동적 비선형 파괴 실험에 있어서 크랙 입구 개구 변위 (CMOD)에 의하여 J-적분값의 단순 계산이 가능함을 입증하였다. 탄소성 재료의 특성이 여러 가지의 충격 속도들에서 고려된다. J-적분은 충격 실험 동안 얻어진 사진들로부터 직접적으로 측정된 크랙 입구 개구 변위로부터 예측될 수 있다.

• 한국정밀공학회지
• /
• 제27권9호
• /
• pp.52-57
• /
• 2010

The analysis of a crack in a bone-like material is performed numerically. The bone-like material is hierarchically structured and each hierarchy is structured by mineral platelets and protein matrix through staggered arrangement. Mechanical behavior of the composite can be analyzed using tension shear chain model. The Dugdale model is adopted to evaluate the fracture energy of Bone-like material. The fracture energy dissipation is assumed to concentrate within a strip near the crack tip along the prospective crack path. Fracture criterion of the bone-like material is estimated by using J integral. Effects of hierarchical level, ratio of elastic modulus of mineral to protein, aspect ratio of mineral platelet and volume fraction on J integral are investigated. It is found that the J integral decreases as elastic modulus ratio and hierarchy level increase. It is also shown that the J integral increases as the volume fraction and aspect ratio decrease.

• 대한기계학회논문집
• /
• 제8권1호
• /
• pp.26-33
• /
• 1984

Constant-load-amplitude fatigue crack growth tests were carried out on 5083-0 aluminum alloy under elastic and elastic-plastic conditions. Crack length, crack closure and monotonic fatigue deformation were measured by Kikukawa's unloading elastic compliance monitoring technique and elastic-plastic fatigue crack growth rates were analysed in terms of J integral. Elastic-plastic fatigue crack growth rates can be well expressed by effective cyclic J integral until general yielding occurs. Beyond general yielding, monotonic fatigue deformation becomes significant and growth rates cannot be characterized by a single parameter of effective cyclic J integral alone. However, introducing one more parameter, maximum J integral J$_{max}$ to account for the effect of monotonic fatigue deformation, can explain fatigue crack growth behavior beyond general yielding.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.354-366
• /
• 2020

This work mainly focuses on determination of the fully plastic J-integral solutions for welded center cracked plates subjected to remote tension loading. Detailed three-dimensional elasticeplastic Finite Element Analyses (FEA) were implemented to compute the fully plastic J-integral along the crack front for a wide range of crack geometries, material properties and weld strength mismatch ratios for 900 cases. According to the database generated from FEA, Back-propagation Neural Network (BPNN) model was proposed to predict the values and distributions of fully plastic J-integral along crack front based on the variables used in FEA. The determination coefficient R2 is greater than 0.99, indicating the robustness and goodness of fit of the developed BPNN model. The network model can accurately and efficiently predict the elastic-plastic J-integral for weld centerline crack, which can be used to perform fracture analyses and safety assessment for welded center cracked plates with varying strength mismatch conditions under uniaxial loading.

• 한국해양공학회지
• /
• 제7권1호
• /
• pp.3-12
• /
• 1993

용접부의 파괴특성을 J-적분을 이용하여 유한요소법으로 해석하였다. 용접부 의 열전달 해석 및 응력해석을 수행한후 crack을 도입하여 crack 주위의 자류응력 해석을 통하여 crack tip에서의 J- 적분치를 계산하였다. 이차원 및 삼차원에서의 파괴해석을 위한 modeling 과정을 소개하였으며 대표적인 계산결과를 소개하였다.

• 한국산학기술학회논문지
• /
• 제15권11호
• /
• pp.6440-6445
• /
• 2014

선박 해양플랜트를 비롯한 강구조물에서는 건조중 형성된 결함이나 사용중에 가해지는 여러 가지 하중등에 의하여 균열을 비롯한 손상이 발생한다. 따라서 균열의 해석을 위하여 균열의 세기를 여러 가지 방법으로 평가하며, 파괴역학적 수법에 의한 응력확대계수 K도 그 중의 한가지 방법이다. 본 연구에서는 이러한 목적으로 사용되는 강구조물용 강재의 응력확대계수 K의 평가를 위하여 특히 CT시험편에 대하여 J 적분을 사용하여 평가를 실시하였다. CT시험편의 J 적분의 평가에는 inhouse FEM program을 사용하였으며, 859개의 node 와 1618개의 element로 해석을 실시하였다. 계산결과 본 연구에서의 해석결과는 ASTM에서 제시하는 식에 의한 K값과 99%정도의 일치도를 나타내었다. 이상으로부터 본 연구에서의 시험편에 대하여 사용한 mesh size로 충분한 정도의 균열 해석이 가능함을 알 수 있었다.

• Structural Engineering and Mechanics
• /
• 제58권5호
• /
• pp.745-755
• /
• 2016

A three-dimensional finite element method is used for analysis of repairing cracks in plates with bonded composite patch in elastic and elastic plastic analysis. This study was performed in order to establish an analytical model of the J-integral for repair crack. This formulation of the J-integral to establish models of fatigue crack growth in repairing aircraft structures. The model was developed by interpolation of numerical results. The obtained results were compared with those calculated with the finite element method. It was found that our model gives a good agreement of the J-integral. The arrow shape reduces the J integral at the crack tip, which improves the repair efficiency.

• Coupled systems mechanics
• /
• 제6권1호
• /
• pp.97-111
• /
• 2017

The present paper reports an analytical study of delamination fracture in the Mixed Mode Flexure (MMF) functionally graded beam with considering the material non-linearity. The mechanical behavior of MMF beam is modeled by using a non-linear stress-strain relation. It is assumed that the material is functionally graded along the beam height. Fracture behavior is analyzed by the J-integral approach. Non-linear analytical solution is derived of the J-integral for a delamination located arbitrary along the beam height. The J-integral solution derived is verified by analyzing the strain energy release rate with considering the non-linear material behavior. The effects of material gradient, crack location along the beam height and material non-linearity on the fracture are evaluated. It is found that the J-integral value decreases with increasing the upper crack arm thickness. Concerning the influence of material gradient on the non-linear fracture, the analysis reveals that the J-integral value decreases with increasing the ratio of modulus of elasticity in the lower and upper edge of the beam. It is found also that non-linear material behavior leads to increase of the J-integral value. The present study contributes for the understanding of fracture in functionally graded beams that exhibit material non-linearity.

• 한국압력기기공학회 논문집
• /
• 제16권1호
• /
• pp.100-109
• /
• 2020

Pipelines subjected to ground movement would be easily exposed to large-scale deformation. Since such deformations may cause the pipeline failure, it is important to ensure the safety of pipelines in various operation conditions. However, crack in weld metal have been considered as one of the main causes that can deteriorate the structural integrity of the pipeline. For this reason, the structural integrity of the pipe containing the crack in the weld should be obtained. In order to assess cracked pipe, J-integral and crack-tip opening displacement(CTOD) have been applied widely as the elastic-plastic fracture mechanics parameters representing crack driving force. In this study, engineering solutions to calculate the J-integral and CTOD of pipes with a circumferential outer surface crack in the weld are proposed. For this purpose, 3-dimensional elastic-plastic finite element(FE) analyses have been performed considering the effect of overmatch and width of weld. The shape of the weld was simplified to I-groove, and axial displacement was employed as for loading condition. Based on FE results, the effects of crack size, material properties and width of weldment on J-integral and CTOD were investigated. Additionally, the J-integral and CTOD for I-groove were compared with those for V-groove to examine the effects of the weld shape, and a proportionality coefficient of J-integral and CTOD was calculated from the results of this paper.