• 대한기계학회논문집A
• /
• 제21권3호
• /
• pp.519-527
• /
• 1997

AISI 316 steel has been used extensively for heater and boiler tube of the structural plants such as power, chemical and petroleum plants under severe operating conditions. Usually, material degradation due to microcrack or precipitation of carbides and segregation of impurity elements, is occured by damage accumulated for long-term service at high temperature in this material. In this study, the effect of aging time on fracture toughness was investigated to evaluate the measurement of material degradation. The elastic-plastic fracture toughness behaviour of AISI 316 steel pipe aged at $550^{\circ}C$for 1h-10000h (the aged material) was characterized using the single specimen J-R curve technique and eletric potential drop method at normal loading rate(load-line displacement speed of 0.2mm/min) in room temperature and air environment. The fracture toughness data from above experiments is compared with the $J_{in}$ obtained from predicted values of crack initiation point using potential drop method.

• Elastomers and Composites
• /
• 제49권2호
• /
• pp.144-148
• /
• 2014

자동차 엔진 부품용으로 많이 사용되는 ACM 고무 샘플에 대하여 $150^{\circ}C$, $160^{\circ}C$, $170^{\circ}C$, 및 $180^{\circ}C$의 등온상태에서 시간에 따른 압축영구줄음율(CS)과 열중량감소율을 측정하여 상관관계를 구하고, 이를 비등온 TGA를 이용하는 Toop의 해석방법에 이용하여 사용온도에서의 수명을 예측하고자 하였다. 노화촉진시험으로부터 측정된 중량감소율는 CS에 대하여 선형적으로 변화하는 것이 관찰되었으며, 이로부터 CS 40%에 이르는 시간을 재료의 수명시간으로 했을 때 중량감소에 의한 전환율은 4.2%로 나타났다. TGA 곡선으로부터 Flynn-Wall-Ozawa법에 의하여 전환율 4.2%에서의 활성화에너지는 120.2 kJ/mol로 계산되었으며, 이를 Toop의 해석법에 적용하였을 때의 예측수명은 사용온도 $120^{\circ}C$에서 약 9,700 시간으로 계산되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.157-157
• /
• 1999

Electrochromic tungsten oxide films were prepared by the electron beam deposition, and the dependence of the electrochemical stability and the optical properties on the titanium concentration, and on the annealing temperature, that was investigated. coloring and bleaching experiments were repeated by cyclic voltammetry in a propylene carbonate solution of LiClO4. Spectrometry was used to assess the stability of the transmittance in the degraded films. Tungsten oxide films with titanium contents of about 10~15 mol% were found to be most stable, undergoing the least degradation during the repeated for coloring and bleaching cycles. The reason for this small amount of degradation was the reduction of lithium ion trapping sites in the films, which results in an increased durability. Tungsten oxide films with titanium contents of about 20 mol% were annealed at 20$0^{\circ}C$ for 1 hour, and this results showed that durability of films were increased.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1593-1595
• /
• 2000

We present a new procedure to evaluate the degradation in a lCr-lMo-0.25V steel. The method is based on the existence of the peak of reversible permeability in the differential magnetization around the coercive field strength. The apparatus is based on the detection of the voltage induced in a surface type coil using a lock-in amplifier tuned to a frequency to the exciting one. Results obtained the reversible permeability and Vickers hardness on the annealed samples show the peak interval of reversible permeability and Vickers hardness decreased as ageing time increased. The correlation between Vickers hardness and the peak interval of reversible permeability could well be evaluated non destructively.

• 설비공학논문집
• /
• 제5권3호
• /
• pp.207-216
• /
• 1993

Experimental investigations have been carried out to find the effect of drag reduction caused by effective polymer additives in turbulent flows. The experiments were undertaken with a test section of 9.8mm pipe diameter and 3500 mm pipe length(L/D=357) in a closed loop, and Copolymer-X and Polyacrylamide(PAAM) were used as polymer additives for comparisons. The tests were carried out under different polymer concentrations, and the temperatures of the flow considered were $26^{\circ}C$, $60^{\circ}C$ at the flow velocity of 5.3 m/s. The rate of drag reduction obtained by Copolymer-X is found to be considerably higher than that of PAAM in turbulent flows. Copolymer-X is also found to be very reliable for mechanical degradation, which has not been the case in any other additives. It is concluded that Copolymer-X is considered to be one of the most effective agents as an additive especially for long time hydraulic transports. It is also found that polymer degradation in more likely at lower polymer concentrations in the turbulent flows.

• Advances in materials Research
• /
• 제3권1호
• /
• pp.259-269
• /
• 2014

The boron-nitrogen-containing phenol-formaldehyde resin (BNPFR)/$SiO_2$ nanocomposites (BNPFR/$SiO_2$) were synthesized in-situ, and structure of BNPFR/$SiO_2$ nanocomposites was characterized by FTIR, XRD and TEM. The loss modulus peak temperature $T_p$ of BNPFR/$SiO_2$ nanocomposites cured with different nano-$SiO_2$ content are determined by torsional braid analysis (TBA). The thermal degradation kinetics was investigated by thermogravimetric analysis (TGA). The results show that nano-$SiO_2$ particulate with about 50 nm diameter has a more uniformly distribution in the samples. The loss modulus peak temperature $T_p$ of BNPFR/$SiO_2$ nanocomposite is $214^{\circ}C$ when nano-$SiO_2$ content is 6 wt%. The start thermal degradation temperature $T_{di}$ is higher about $30^{\circ}C$ than pure BNPFR. The residual rate (%) of nanocomposites at $800^{\circ}C$ is above 40 % when nano-$SiO_2$ content is 9 %. The thermal degradation process is multistage decomposition and following first order.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.250-255
• /
• 2001

It is inevitable to evaluate the life of turbine rotor because the operating periods of power plants need to be extended. The magnetic methods utilizing Magnetic Barkhausen noise curve were applied to detect the degradation caused by thermal aging. The Magnetic property of material depends on the domain dynamics and it is affected by the microstructure of material. Therefore the magnetic property is very sensitive to the microstructure change of the material. It is, thus, very useful to detect the state of degradation of varying materials. The test specimen made of 1Cr-1Mo-0.25V steel was used widely for turbine rotor material, and seven kinds of specimens with different degradation levels were prepared by the isothermal heat treatment at $630^{\circ}C$. With the increase of degradation, BHN was decreased. The result was compared with coercive force and vickers hardness.

• Elastomers and Composites
• /
• 제45권4호
• /
• pp.263-271
• /
• 2010

간헐 CSR 측정법을 이용하여 FKM 오링의 노화 거동과 수명 예측에 관하여 연구하였다. Intermittent CSR 지그는 오링의 실제 사용환경을 고려하여 설계 제작하였다. 각 측정 조건에 따른 마찰 영향, 열 손실 영향 및 Mullins 효과에 의한 간헐 CSR의 응력 거동 변화를 관찰하였다. 오링의 노화 거동은 $60{\sim}160^{\circ}C$에서의 가속 노화 연구를 통하여 관찰하였다. 고온 영역($100{\sim}160^{\circ}C$)에서 오링은 선형 노화 거동을 나타내었으며, 아레니우스 관계를 만족시켰다. 이때의 활성화 에너지는 60.2 kJ/mol로 나타났다. 아레니우스 도식으로 부터, 오링의 예측 수명은 고장 조건 50%와 40%에 대하여 각각 43.3 년과 69.6 년으로 나타났다. 시간-온도 중첩 원리를 이용하여 $60^{\circ}C$에서의 노화 거동을 관찰하였으며, 실험 시간을 절약 할 수 있었다. $60{\sim}100^{\circ}C$의 저온 영역에서의 활성화 에너지는 48.3 kJ/mol로 감소하였다. WLF(William-Landel-Ferry) 도식을 통하여 FKM 오링은 $100^{\circ}C$ 이하에서 비선형 노화 거동을 나타내는 것을 확인하였다. 시간-온도 중첩 원리로부터, FKM 오링의 수명은 고장 조건 50%와 40%에 대하여 각각 19.1년과 25.2년으로 나타났다. 시간-온도 중첩 원리를 이용하여 예측한 오링의 수명이 아레니우스 관계에 의한 수명 보다 보수적인 것으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.919-926
• /
• 2023

To analyze the cause of the destruction of thin, carbon-backed lithium fluoride targets during a measurement of the fusion of ⁷Li and ¹⁷O, we estimate theoretically the lifetimes of carbon and LiF films due to sputtering, thermal evaporation, and lattice damage and compare them with the lifetime observed in the experiment. Sputtering yields and thermal evaporation rates in carbon and LiF films are too low to play significant roles in the destruction of the targets. We estimate the lifetime of the target due to lattice damage of the carbon backing and the LiF film using a previously reported model. In the experiment, elastically scattered target and beam ions were detected by surface silicon barrier (SSB) detectors so that the product of the beam flux and the target density could be monitored during the experiment. The areas of the targets exposed to different beam intensities and fluences were degraded and then perforated, forming holes with a diameter around the beam spot size. Overall, the target thickness tends to decrease linearly as a function of the beam fluence. However, the thickness also exhibits an increasing interval after SSB counts per beam ion decreases linearly, extending the target lifetime. The lifetime of thin LiF film as determined by lattice damage is calculated for the first time using a lattice damage model, and the calculated lifetime agrees well with the observed target lifetime during the experiment. In experiments using a thin LiF target to induce nuclear reactions, this study suggests methods to predict the lifetime of the LiF film and arrange the experimental plan for maximum efficiency.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.773-774
• /
• 2010