• International Journal of Automotive Technology
• /
• 제7권1호
• /
• pp.101-107
• /
• 2006

The force and moment simulation of a steady-state rolling tire taking the effect of tread pattern into account is described using a steady-state transport method with ABAQUS. Tread meshes can not fully consider a tread pattern because detailed tread meshes are not allowed in the steady-state transport method. Therefore, the tread elements are modeled to have orthotropic property instead of isotropic property. The force and moment simulation has been carried out for the cases of both isotropic and orthotropic properties of tread elements. Both cases of simulation results are then compared with the experimental results. It is verified that the orthotropic case is in a better agreement with the experimental result than the isotropic case. Angle effects of tread pattern have been studied by changing the orientation angle of orthotropic property of tread. It is shown that the groove angle in the tread shoulder region has a more effect on force and moment of a tire than that in the tread center region.

• 대한기계학회논문집A
• /
• 제21권3호
• /
• pp.393-404
• /
• 1997

SPATE(Stress Pattern Analysis by Thermal Emission) can be effectively used to analyze the stress distributions of isotropic structure under the repeated load by non-contact. In this research, the measuring method and the measuring concept of stress intensity factor of isotropic material by SPATE are suggested. The validity of the method and the concept was certified through SPATE experiment.

• 한국해양공학회지
• /
• 제25권5호
• /
• pp.69-75
• /
• 2011

The purpose of this study was to develop a buckling analysis technique for a windpower system structure under environmental loadings (hydrostatic pressure) using FEM. We analyzed an isotropic material and composite material and made a comparison using buckling pressure formulas. First, finite element analyses for an isotropic material (SC410) were performed to obtain the variation of buckling pressure for the number of elements and boundary conditions in a pressure-shell model, and the numerical results were compared with those of existing empirical formulas. Then, additional finite element analyses based on the results of the isotropic material (SC410) were performed to determine the optimum lamination angle and pattern for a composite material (URN300). The results of the FE analyses for the composite material were also compared with those of existing empirical formulas. The ply orientations (lamination angles) used in the FE analyses were $0^{\circ}$, $15^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, $75^{\circ}$, and. The lamination patterns in the FE analyses were and. The lamination pattern was assumed to be the equivalent model of. The results of the FE analyses for the isotropic material (SC410) indicated that the optimal values for the number of elements and the boundary conditions were 6000 and both simply supported, respectively. The results of the FE analyses for the composite material (URN300) showed that the optimal ply orientation was $60^{\circ}{\sim}75^{\circ}$.

• 한국전자파학회지:전자파기술
• /
• 제3권1호
• /
• pp.20-27
• /
• 1992

$\lambda$/2 다이폴 안테나 3개판 x,y,z축상에 서로 직교되도록 배열하여 각 소자의 수신 출력을 합성하므로써 등방성 패턴 안테나가 실현되었다. 각 소자는 H20MHz-895MHz익 서례 주파수 대역에서 임피먼스 정합플 양호하게 하고, 소자간의 상호 결합 효과를 최소로하기 위하여 슬리브 형태의 $\lambda$/2 다이폴 안테나를 사용하였다. 설계된 등방성 패턴 얀테나로 부터 복사된 충 전계의 세기는 원방계에서 각 촉상의 다이폴에 의해 발생 되는 Magnetic Vector Potential을 이용하여 계산하였다. 계산결과, 총 전계의 세기는 원점으포 부터의 거리에는 반비례하였고, 패턴상수 차이는 2.1dB이하이었다. 또한, x,y,z 축상에 배열된 안테나에서 수산된 합성전계의 편차는 2.8dB이하로 이론적 계산치와 O.7dB 정도의 차이가 있었다.

• 마이크로전자및패키징학회지
• /
• 제22권1호
• /
• pp.51-54
• /
• 2015

An electro-plating technology on a cured isotropic conductive pattern with a hybrid Cu paste composed of resin matrix, copper, and solder powders has been developed. In a conventional technology, Ag paste was used to perform a conductive pattern on a PCB or silicon substrate. From previous research, the electrical conductive mechanism and principle of the hybrid Cu paste were concisely investigated. The isotropic conductive pattern on the PCB substrate was performed using screen-printing technology. The optimum electro-plating condition was experimentally determined by processing parameters such as the metal content of the hybrid Cu paste, applied current density, and time for the electroplating in the plating bath. The surfaces and cross-sections were observed using optical and SEM photographs. In conclusion, the optimized processing conditions for Cu electro-plating technology on the conductive pattern were a current density of $40mA/cm^2$ and a plating time of 20min on the hybrid Cu paste with a metal content of 44 vol.%. More details of the mechanical properties and processing conditions will be investigated in further research.

• 전자공학회논문지A
• /
• 제33A권11호
• /
• pp.44-51
• /
• 1996

The radiation characteristics of a slot antenna in a plane conductor covered with a miving isotropic plasma layer are analyzed. The radiation null which causes distortion in radiation pattern is explainted by the zero of integrand in an asymptotic integral for radiation fields as a function of the plasma parameter and the plasma velocity. Numerical resutls for a radiation null calculated from various plasma and velocity parameters correspond to the results of two-dimensional problem.

• 한국정보전자통신기술학회논문지
• /
• 제2권2호
• /
• pp.57-62
• /
• 2009

본 논문에서는 금속체에 태그를 부착하였을 경우에도 태그 안테나가 전방향성 방사패턴을 갖고 동작하는 PIFA 형 RFID 금속 태그 안테나를 제안하였다. 안테나는 본체와 급전부, 수직 패치와 접지면으로 되어 있으며, 안테나를 소형화시키기 위해 본체와 접지면 사이에 높은 유전율을 가지는 기판을 삽입하였다. 본체는 급전부를 중심으로 대칭적인 구조를 가져 안테나에 흐르는 전류를 반대 방향으로 흐르도록 하였다. 시뮬레이션 결과 제안된 안테나의 임피던스 대역폭 ($S_{11}$ < -10 dB)은 20 MHz (900 ~ 920 MHz)를 나타내었고, 최대 복사 이득은 중심 주파수 912 MHz에서 공기 중과 금속 물체에 부착하였을 때 각각 -10 dBi와 -15 dBi를 가졌다. 또한 이득 편차가 각각 6 dB 이하를 만족시켜 제안된 안테나가 전방향성 복사 패턴을 가지고 동작하는 것을 알 수 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.516-521
• /
• 2000

Most of studies, using ESPI method, have handled tension, thermal and vibration analysis, and is limited to isotropic materials. However, tension and vibration simultaneously are loaded in real structure. Also, almost study using ESPI method is locally limited to the analysis on the isotropic materials and a few studies on the anisotropic materials have reported. Existing methods, such as the accelerometer method and FEA method, to analyze vibration have some disadvantages. Using the accelerometer method that is generally used to analyze vibration phenomena, it is impossible to analyze vibration on the oscillating body and one can observe no vibration mode shape during experiment. In case of the FEA method, it is difficult to define boundary conditions correctly if the shape of a body tested is complex, and one can just obtain vibration mode shapes on the peak amplitude in each modes. In this study, plane plate of stainless steel(STS304), isotropic material, that is used as structural steel is analyzed about vibration characteristics under tension. Also, in the study of stainless steel, the characteristics of composite material(AS4/PEEK) used as high strength structural material in aircraft is evaluated about vibration under tension, and studies the effect of tension on vibration.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.106-112
• /
• 1996

In this paper, the propagation of elastic wave generated by loading impact to plates made of isotropic or anisotropic material was studied. And the influence of boundary conditions(free or clamped edge) upon the reflection of elastic wave of isotropic plate such as aluminum plate showed circular interferometric fringe pattern, whereas that of anisotropic plate such as epoxy composite laminates showed elliptical one. And the transverse displacement curves obtained from experiment and theory for both plates agreed well. Also, the waves reflected from the boundary edges showed much differences according to the boundary condition of edges.

• 대한기계학회논문집A
• /
• 제20권10호
• /
• pp.3211-3223
• /
• 1996

In this paper, the propagation of elastic wave generated by loading impact to plates made of isotropic of anisotropic material was studied. And the influence of boundary conditions (free or clamped edge) upon the reflection of elastic wave was anlyzed. Also, double exposure holographic interferometer using ruby pulse laser was formed in order to investigate transient waves. Before the elasitc wave was reflected from the edges, the elastic wave of isotropic plate such as aluminum plate showed circular interferometric fringe pattern, whereas that of anisotropic plate such as epoxy composite laminates showed elliptical one. And the transverse displacement curves obtained from experiment and theory for both plates agreed well. Also, the waves reflected from the boundary edges showed much differences according to the boundary condition of edges.