• 한국분말재료학회지
• /
• 제7권3호
• /
• pp.143-148
• /
• 2000

NiAl alloy powders were prepared by mechanical alloying method and bulk specimens were produced using hot isostatic pressing techniques. This study focused on the transformation behavior and properties of Ni-Al mechanically alloyed powders and bulk alloys. Transformation behavior was investigated by differential scanning calorimeter (DSC), XRD and TEM. Particle size distribution and microstructures of mechanically alloyed powders were studied by particle size analyzer and scanning electron microscope (SEM). After 10 hours milling, XRB peak broadening appeared at the alloyed powders with compositions of Ni-36at%Al to 40at%Al. The NiAl and $Ni_3Al$ intermetallic compounds were formed after water quenching of solution treated powders and bulk samples at $1200^{\circ}C$, but the martensite phase was observed after liquid nitrogen quenching of solution treated powders. However, the formation of $Ni_3Al$ intermetallic compounds were not restricted by fast quenching into liquid nitrogen. It is considered to be caused by fast diffusion of atoms for the formation of stable $\beta$(NiAl) phase and $Ni_3Al$ due to nano sized grains during quenching. Amounts of martensite phase increased as the composition of aluminium component decreased in the Ni-Al alloy, which resulted in the increasing damping properties.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.365-368
• /
• 2000

We have studies on the Microstructures and densities as a function of forming pressures and the magnetic properties of the specimens with additive Bi$_2$O$_3$ that sintered at 95$0^{\circ}C$ for 4.5 hours for synthesizing optimal Ni-Cu-Zn ferrite. Green density rose generally as Forming pressure increased from 1.7 ton/cm$^2$to 2.5 ton/cm$^2$and Cold Isostatic Pressure(CIP) method was more effective than Die Pressure(DP) method to high green density. Forming pressure had no influence on apparent density but on the other hand Bi$_2$O$_3$contents were strongly dominant to appaernt density than forming pressure. Bi$_2$O$_3$liquid phases created during sintering process promoted sintering and grain growth so that apparent density, grain size and permeability increased compared to that of the specimens which were sintered with non-additive Bi$_2$O$_3$.

• Computers and Concrete
• /
• 제23권2호
• /
• pp.81-95
• /
• 2019

The unexpected seismic interaction of dry-assembled precast concrete frame structures typical of the European heritage with their precast cladding panels brought to extensive failures of the panels during recent earthquakes due to the inadequateness of their connection systems. Following this recognition, an experimental campaign of cyclic and pseudo-dynamic tests has been performed at ELSA laboratory of the Joint Research Centre of the European Commission on a full-scale prototype of precast structure with vertical and horizontal cladding panels within the framework of the Safecladding project. The panels were connected to the frame structure by means of innovative arrangements of fastening systems including isostatic, integrated and dissipative. Many of the investigated configurations involved a strong frame-cladding interaction, modifying the structural behaviour of the frame turning it into highly non-linear since small deformation. In such cases, properly modelling the connections becomes fundamental in the framework of a design by non-linear dynamic analysis. This paper presents the peculiarities of the numerical models of precast frame structures equipped with the various cladding connection systems which have been set to predict and simulate the experimental results from pseudo-dynamic tests. The comparison allows to validate the structural models and to derive recommendations for a proper modelling of the different types of existing and innovative cladding connection systems.

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1161-1166
• /
• 2022

Green pitch coke with an average particle size of 2 mm was adopted as densifier and added to the raw materials of conventional A3-3 matrix graphite (MG) to prepare modified A3-3 matrix graphite (MMG) by the quasi-isostatic molding method. The structure, mechanical and thermal properties were assessed. Compared with MG, MMG had a more compact structure, and exhibited improved properties of higher mechanical strength, higher thermal conductivity and better molten salt barrier performance. Notably, under the same infiltration pressure of 5 atm, the fluoride salt occupation of MMG was only 0.26 wt%, whereas it was 15.82 wt% for MG. The densification effect of green pitch coke endowed MMG with improved properties for potential use in the spherical fuel elements of molten salt reactor.

• 한국분말재료학회지
• /
• 제30권1호
• /
• pp.35-40
• /
• 2023

In this study, a graphite block is fabricated using artificial graphite processing byproduct and phenolic resin as raw materials. Mechanical and electrical property changes are confirmed due to the preforming method. After fabricating preforms at 50, 100, and 150 MPa, CIP molding at 150 MPa is followed by heat treatment to prepare a graphite block. 150UP-CIP shows a 12.9% reduction in porosity compared with the 150 MPa preform. As the porosity is decreased, the bulk density, flexural strength, and shore hardness are increased by 14.9%, 102.4%, and 13.7%, respectively; and the deviation of density and electrical resistivity are decreased by 51.9% and 34.1%, respectively. Therefore, as the preforming pressure increases, the porosity decreases, and the electrical and mechanical properties improve.

• 한국지형학회지
• /
• 제26권2호
• /
• pp.55-67
• /
• 2019

This study tries to reveal and compare uplift rates in the southern coast of the Korean Peninsula, based on absolute ages from coastal terrace on the coast. The uplift rate in the East Coast from previous study ranges from 0.258 to 0.357 m/ka with a median rate of 0.262 m/ka and shows an increase trend from north to south. Median uplift rate of 0.082 m/ka with minimum and maximum rates of 0.053 m/ka and 0.127 m/ka, respectively, is calculated in the South Coast from previous and this studies. The uplift rate in the West Coast from 3 absolute ages in this study is 0.082~0.112 m/ka with a median rate of 0.090 m/ka. Based on these uplift rates in the southern coast of the Korean Peninsula, it can be concluded that since MIS 5, the East Coast has experienced 3 to 4 times faster uplift rate than the West and South Coasts. However, this study suggests that more discussion on whether these uplift rates are long-term tectonic movement associated with tilted warping movement since the Tertiary or short-term tectonic movement associated with isostatic rebound due to sea level change since the Last Interglacial is needed.

• 열처리공학회지
• /
• 제37권1호
• /
• pp.1-8
• /
• 2024

Phase stability of tetragonal crystals in yttria-stabilized zirconia ceramics is dependent on the content of yttria and the heat-treatment condition, related with mechanical properties. In this study, we fabricated the 1.5 mol% yttria-stabilized zirconia (1.5Y-YSZ) ceramics by cold isostatic pressing (CIP) and post-sintering at temperature range of 1200 to 1350℃ for 2 hours and investigated the sintered properties and microstructural evolution. Sintered and microstructural parameters, i.e, apparent density, grain size and phase composition of 1.5Y-YSZ ceramics were mainly dependent on the sintering temperature. Maximum sintered density of 99.4 % and average grain size of 200-300 nm could be obtained from the heat-treatment condition above sintering temperature at 1300℃ for 2 hours, possessing the superior mechanical hardness with 1200 Hv. However, phase stability of tetragonal grains in 1.5 YSZ ceramics is very low, inducing the phase transformation to monoclinic crystals on specimen surface during cooling after heat-treatment.

• Advances in nano research
• /
• 제16권2호
• /
• pp.165-173
• /
• 2024

The production of multipurpose cotton fabrics aimed at elevating the quality of aerobic and dance sportswear is explored in this study. Powder metallurgy, known for its high efficiency in manufacturing technological components with minimal waste, is employed as a method for fabricating brush ferrules for painting. The utilization of iron-copper material, prepared through powder metallurgy, enhances the strength and quality of the brush ferrules. A microscopic analysis reveals a robust interconnection between the particles of each layer achieved through isostatic pressure, resulting in a favorable microstructure. The relative density and strength of parts produced from copper-iron powder exhibit an increase with higher pressure levels. The application of this material in brush ferrules ensures their durability and longevity, thereby supporting the creation of artwork. The evolution of art over time reflects changing ideas and possibilities, and technological advancements have significantly improved artistic tools. The role of tools in artistic expression is paramount, and the integration of powder metallurgy materials in brush ferrules fortifies their artistic importance. In summary, this study underscores the advantages of powder metallurgy in augmenting the quality of art tools and facilitating artistic creation.

• 방사성폐기물학회지
• /
• 제13권2호
• /
• pp.155-161
• /
• 2015

몰리브덴-99의 붕괴에 의해 생산되는 테크네튬-99m 은 방사선 진단에 중요한 역할을 담당하고 있다. 몰리브덴-99 는 주로 우라늄-235의 핵분열에 의해 생산되고 있으며, 이를 위해 고농축 우라늄 표적 또는 저농축 우라늄 표적이 연구로에서 조사된다. 현재는 고농축 우라늄의 사용에 따른 핵확산 문제를 저감하기 위해 저농축 우라늄 표적의 사용이 권장되고 있다. 본 연구는 몰리브덴-99 생산 시설의 계획 단계에서 방사성 폐기물 관리 전략을 정의하기 위하여 저농축 우라늄의 사용이 방사성 폐기물의 흐름에 미치는 영향을 분석하였다. 저농축 우라늄 표적 사용 시 우라늄 함유 폐기물의 부피가 6배 이상 증가하기 때문에 우라늄 고밀도 표적의 사용과 고온 정수압 압축법의 활용이 제안되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.184-184
• /
• 2009

Lead-free Piezoelectric $[Li_{0.04}(Na_{0.44}K_{0.56})](Nb_{0.88}Ta_{0.1}Sb_{0.02})$ (abbreviated as NKNLTS) has been synthsized by conventional mixed oxide method traditional ceramics process without cold-isostatic pressing. Effect of $Bi_2O_3$ addition on NKNLTS ceramics was investigated. Piezoelectric properties of the ceramic were varied with the amount of $Bi_2O_3$ addition and showed the maximum Kp value at 0.4wt% $Bi_2O_3$ addition. The results show that the optimum poling condition for NKNLTS ceramics of 3.5kV/mm, poling temperature of $120^{\circ}C$ and poling time of 30min. At the sintering temperature of $1100^{\circ}C$ and the calcination temperature $800^{\circ}C$, the optimal values of density=$4.7g/cm^2$, Kp=0.44, $\varepsilon_r$=1309 were obtained. Consequently, lead free piezoelectric ceramics with the excellent piezoelectric could be fabricated using a conventional mixed oxide process and the optimal manuacturing condition of those was obtained.