• Elastomers and Composites
• /
• v.53 no.3
• /
• pp.168-174
• /
• 2018

Natural rubber (NR) and bromo-isobutylene-isoprene rubber (BIIR) were compounded with other formulation chemicals through polymer blending via a mechanical mixing method. After rubber vulcanization by hot-press compression molding, the cure characteristics, mechanical properties, and ozone resistance of the NR/BIIR blends were measured. As the BIIR content increased, the maximum torque of the blends decreased, while the optimum cure time and scorch time tended to increase. Furthermore, the hardness of the blends increased with increasing BIIR content, reaching the maximum value at 75 wt% BIIR, and decreased with a further increase in the BIIR loading. The tensile strength and elongation at break decreased with an increase in the BIIR content, reaching the minimum value at 75 wt% BIIR, and increased with a further increase in the BIIR content. In the ozone resistance test, cracks were not generated when the BIIR content was more than 75 wt%.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.12
• /
• pp.1064-1069
• /
• 1994

Chlorobis(isoprene)rhodium(Ⅰ) (3), prepared by olefin-exchange reaction of chlorobis(cyclooctene)rhodium dimer (2) with isoprene, reacted with benzaldimine 4 to give iminoacylrhodium(Ⅲ) ${\eta}^3$-1,2-dimethylallyl complex 6. Ligand-promoted reductive elimination of 6 by pyridine and P(OMe)$_3$ produced ${\beta},{\gamma}$-unsaturated ketimine 8, which was readily hydrolyzed to give ${\beta},{\gamma}$-unsaturated ketone 9. Other methyl branched dienes such as 2,3-dimethylbutadiene, 3-methyl-1,3-pentadiene, 2-methyl-1,3-pentadiene, 2,4-dimethyl-1,3-pentadiene, 3-methyl-1,4-pentadiene and 2-methyl-1,4-pentadiene, were applied the synthesis of ${\beta},{\gamma}$-unsaturated ketones. In case of 2,4-dimethyl-1,3-pentadiene, only ${\gamma},{\delta}$ -unsaturated ketone 25, 1,2-addition product, was obtained, may be due to the mono-olefin coordination.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2009.10a
• /
• pp.277-279
• /
• 2009

• Journal of Environmental Science International
• /
• v.24 no.2
• /
• pp.207-219
• /
• 2015

The purpose of this study is to show the geographical distribution and the temporal variation of the emission amount of biogenic volatile organic compounds(BVOCs) emanated from forests at Jeju Island. The total emission amount of BVOCs calculated by using the CORINAIR Methodology is $3612ton\;yr^{-1}$ at Jeju Island. More than half of BVOCs emissions is come from coniferous forest, and 45 per cent from broad leaved forest. The others is attributed to grassland. Of total emission of BVOCs, isoprene accounts for 28 per cent, monoterpene for 32 per cent, and other VOCs for about 40 percent, respectively. It can be shown that $3000{\sim}10000kg\;yr^{-1}$ of BVOCs is emitted at the zone with dense forest from an altitude of 500 m to the top of Mt. Halla, and less than $1500kg\;yr^{-1}$ at the zone an altitude of below 500 meters. The monoterpene emission is more than $1500kg\;yr^{-1}$ due to the existence of a colony of Abies koreana at the place with more than 1500 meters and a community of Pinus thunbergii and Cryptomeria japonica at the elevation of 500~700 m. In the case of isoprene emission, there is $1500{\sim}3000kg\;yr^{-1}$ at the zone of an elevation from 700 m to 1500 m due to dense broad leaved forest and very little of its emission at an elevation of more than 1500 meters because there is hardly broad leaved trees grown. In this study, emission of BVOCs according to the altitude above sea level is estimated under the situation of lack of the data for broad leaved tree. More detailed data and information for the distribution of broad leaved trees are needed in order to calculate more realistic BVOC emission.

• Elastomers and Composites
• /
• v.38 no.4
• /
• pp.326-333
• /
• 2003

Even though many studies have been reported about rubber vulcanization, it is still remained difficult to find a quantitative relationship between the final states of vulcanized rubber and initial formulation or processing conditions. Dynamic differential scanning calorimetry (DSC) method is known as a comparatively easy method to research for the rubber vulcanization in both experimental and analysis. In the present research, a study on the vulcanization reaction of NR/CB composites modified by isoprene(IR) and chloroprene(CR) rubbers is carried out using dynamic DSC method. Thermograms with several different heating rates were obtained and analyzed using the Kissinger method. Analysis showed that the vulcanization reaction was progressed through the first order reaction mechanism. In addition, the reaction temperature was severely influenced by the kinds or rubber modifiers, in this case, more influenced by CR than by IR. Those effects were clearly verified in the values of activation energy. Kinds of carbon blacks, however, could hardly influence on the reaction mechanism.

• Elastomers and Composites
• /
• v.53 no.3
• /
• pp.158-167
• /
• 2018

In this study, in-situ trans-selective polymerization of isoprene was carried out using titanium-based Ziegler-Natta catalysts. The catalysts were prepared by high-energy ball milling. Individually Large-inner-diameter carbon nanotubes (CNTL), and hydroxylated carbon nanotubes (CNTOH), along with magnesium chloride ($MgCl_2$) were used as the carriers for the catalysts. The optimum ball-milling time for preparing the $CNT/MgCl_2/TiCl_4$ Ziegler-Natta catalysts was 4 h. The $CNTOH/MgCl_2/TiCl_4$ catalyst showed a higher efficiency than that of the $CNTL/MgCl_2/TiCl_4$ catalyst, based on the rate of polymerization. The effects of the CNT-filler type on the isoprene polymerization behaviors and polymer properties were investigated. The morphologies of the trans-1,4-polyisoprene (TPI)/CNT and TPI/CNTOH nanocomposites exhibited a tube-like shape, and the CNTL and CNTOH fillers were well dispersed in the TPI matrix. In addition, the thermal stability of TPI significantly increased upon the introduction of a small amount of both CNTL/CNTOH fillers (0.15 wt%), owing to the satisfactory dispersion of the CNTL/CNTOH in the TPI matrix.

• Journal of Environmental Science International
• /
• v.16 no.3
• /
• pp.269-275
• /
• 2007

The standard emission rate(ERs) of isoprene was quantitatively measured in situ from Quercus mongolica Fischer that dominates more than about 85% of domestic oak trees. The ERs values in spring and summer were similar to 64.4 and 58.1 (${\mu}gC/gdw/hr$), respectively. The ERs in autumn, 7.06(${\mu}gC/gdw/hr$), was about $8{\sim}9$ times lower than those in spring and summer. The coefficient of determination ($r^2$) between ERs and $C_L\;C_T$ ranged from 0.593 to 0.836. The correlation coefficients between the ERs and PAR. the ER and temperature suggested that ERs have strong correlation with PAR(photosynthetically active radiation) and temperature. In addition, the high values of PAR, temperature, and ERs were found in the time zone of $15:00{\sim}17:00$(spring), $15:00{\sim}16:00$(summer), and $14:00{\sim}15:00$(autumn).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1787-1794
• /
• 2008

Coenzyme $Q_{10}$ and six derivatives of coenzyme $Q_n$ were synthesized and tested for their antioxidative effects occurred in proximal tubular epithelial cell (LLC-PK1 cell) and cytotoxicities using in NIH/3T3 cell. As the result, synthetic coenzyme $Q_n$ derivatives showed a potent antioxidative effect compared to coenzyme $Q_{10}$. Among these synthetic compounds, coenzyme $Q_3$-C at ranged 0.04 to 0.4 mmol showed the $107.7{\sim}135.9%$ of cell viability in LLC-PK1 cell. In the test of NIH/3T3, all synthesized coenzyme $Q_n$ derivatives showed the similar effect compared with coenzyme $Q_{10}$. A correlation between isoprene unit number of coenzyme $Q_n$ derivatives and its biological effects, we suggest reduction of isoprene unit number of $Q_n$ derivatives may be related to the increase of antioxidants effects and the reduction of cytotoxicities.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2000.05a
• /
• pp.239-240
• /
• 2000

열건조식 음식물쓰레기 처리기에서 발생하는 VOC의 분해효율을 향상시키기 위하여 생물여과기를 이용하여 실험하였다. 현장 생물여과기에서 배출되는 휘발성 물질은 총 50여 가지 물질이 검출되었다. 주요 악취 유발물질은 isoprene, dimethyl sulfide (DMS), dimethyl disulfide (DMDS), limonene 등으로 파악되었다. 칼럼 반응기를 이용한 휘발성 물질 분해는 20일 정도의 적응기 후 제거되었으며, 제거 효율은 90% 이상으로 나타났다.

• Journal of the Korean Society of Tobacco Science
• /
• v.26 no.2 s.52
• /
• pp.179-185
• /
• 2004

This study was conducted to investigate the delivery pattern of volatile organic compounds(VOCs) in mainstream smoke generated by the combustion of a different ventilated cigarette. To compare the delivery pattern and the concentration of VOCs in mainstream smoke, the six different ventilated cigarette was manufactured and analyzed VOCs using the GC/MS. As a result of this experiments, cambridge filter used to trap the particulate matter in mainstream smoke did not affect on the trapping of VOCs components, and two impinger method among the trapping methods was the best condition to trap VOCs from mainstream smoke. As the slope of the delivery of VOCs such as isoprene, acrylonitrile and toluene were higher than 1, but that of benzene was lower than other VOCs.