• Microbiology and Biotechnology Letters
• /
• v.15 no.2
• /
• pp.98-103
• /
• 1987

Two phase reaction system was used to hydrolyze the olive oil for fat splitting. Kinetics of lipases in two phase system were investigated by determining the hydrolysis rate of triglycerides at various olive oil concentrations in isooctane using the microbial lipases from Candida rugosa and Rhizopus arrhizus. The rate equation in lipid hydrolysis for various olive oil concentrations in two phase system was deviated from the Michaelis-Menten kinetics. The results suggested that the olive oil concentration in isooctane affects the interfacial area. The dependency of the interfacial area on olive oil concentration is greater at the lower olive oil concentration than at the higher substrate concentration. We modified the rate equation by considering the interfacial area between two phases depending on the olive oil concentration in solvent phase.

• KSBB Journal
• /
• v.23 no.3
• /
• pp.257-262
• /
• 2008

In this study, the reaction conditions for lipase-catalyzed resolution of racemic naproxen 2,2,2-trilfluoroethyl thioester were optimized, and the effect of surfactants was investigated. Among the organic solvents tested, the isooctane showed the highest conversion (92.19%) in a hydrolytic reaction of (S)-naproxen 2,2,2-trifluoroethyl thioester. In addition, the isooctane induced the highest initial reaction rate of (S)-naproxen 2,2,2-trifluoroethyl thioester ($V_s=2.34{\times}10^{-2}mM/h$), the highest enantioselectivity (E = 36.12) and the highest specific activity ($V_s/(E_t)=7.80{\times}10^{-4}mmol/h{\cdot}g$) of lipase. Furthermore, reaction conditions such as temperature, concentration of the substrate and enzyme, and agitation speed were optimized using response surface methodology (RSM), and the statistical analysis indicated that the optimal conditions were $48.2^{\circ}C$, 3.51 mM, 30.11 mg/mL and 180 rpm, respectively. When the optimal reaction conditions were used, the conversion of (S)-naproxen 2,2,2-trifluoroethyl thioester was 96.5%, which is similar to the conversion (94.6%) that was predicted by the model. After optimization of reaction conditions, the initial reaction rate, lipase specific activity and conversion of (S)-naproxen 2,2,2-trifluoroethyl thioester increased by approximately 19.54%, 19.12% and 4.05%, respectively. The effect of surfactants such as Triton X-100 and NP-10 was also studied and NP-10 showed the highest conversion (89.43%), final reaction rate of (S)-naproxen 2,2,2-trifluoroethyl thioester ($V_s=1.175{\times}10^{-2}mM/h$) and enantioselectivity (E = 59.24) of lipase.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.3
• /
• pp.496-501
• /
• 1994

The synthesis of lauryl palmitate from palmitic acid and lauryl alcohol was investigated in organic solvents using lipase. Water-immiscible organic solvent such as hexane, toluenem cyclohexane, and isooctane were found to be suitable of ester synthesis . The effect of water content on the initial rate of conversion was examined . As the content increased, the reaction rate increased. But addition of water in organic solvent decreased therostability of enzyme . The best lauryl palmitate synthesis was achieved with water content of 0.2-0.4% reaction temperature of 4$0^{\circ}C$ and 45$^{\circ}C$ for Candida cylindracea lipase porcine, pancreatic lipase, respectively. when ester synthesis was carried out under the optimum conditions, the conversion yield of palmitate into lauryl palmitate after 70hrs reached 85% and 69 % for the Candida cylindracea lipase and porcine opancreatic lipase, respectivley.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.157-160
• /
• 2000

Solubilization of bovine serum albumin(BSA) is performed using a reverse micellar system consisting of sodium bis(2-ethylhexyl) sulfosuccinate(AOT). Of particular, effects of pH, salt concentration and its type on the solubilization are investigated by means of the phase-transfer method. One of significant findings in our study is that the protein is to a large extent aggregated in the interface between organic and aqueous phases at lower pH and small salt concentration. In this presentation, the optimal extraction process conditions for BSA, which is bulky, are proposed.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1986.12a
• /
• pp.523.2-523
• /
• 1986

The hydrolysis of olive oil was attempted with immobilized C. rugosa lipase in the reverse phase solvent system. (i.e. immobilized wet particles is dispersed in continuous phase olive oil or organic solvents containing olive oil). Sephadex LH-20 and LH-60 were used as the supports that can be used in organic solvents. The water content of wet particles of sephadex LH-20 and LH-60 were about 72% (w/w) and 85% (w/w), respectively Both swollen gels with 0.05M buffers adsorbed about 18% of lipase dissolved. They were easily dispersed in liquid olive oil or in organic solvents. The effects of organic solvents on the stability and catalytic activity of the lipase have been examined. The results revealed that isooctane is superior to the other solvents examined for enzymatic fat spliting in reverse phase system. Kinetics of enzymatic hydrolys of olive oil by immobilized lipase has been investigated in a batch reactor. Effects of pH and temperature on the lipase were studied. The substrate concentration was influenced positively on the thermal stability.

• Journal of Energy Engineering
• /
• v.24 no.3
• /
• pp.61-66
• /
• 2015

Homogeneous charge compression ignition (HCCI) engine combines the combustion characteristics of a compression ignition engine and a spark ignition engine. HCCI engines take advantage of the high compression ratio and heat release rate and thus exhibit high efficiency found in compression ignition engines. In modern research, simulation has be come a powerful tool as it saves time and also economical when compared to experimental study. Engine simulation has been developed to predict the performance of a homogeneous charge compression ignition engine. The effects of compression ratio, cylinder pressure, rate of pressure rise, flame temperature, rate of heat release, and mass fraction burned were simulated. The simulation and analysis show several meaningful results. The objective of the present study is to develop a combustion characteristics model for a homogeneous charge compression ignition engine running with isooctane as a fuel and effect of compression ratio.

• Journal of Energy Engineering
• /
• v.24 no.3
• /
• pp.55-60
• /
• 2015

Recent engine development has focused mainly on the improvement of engine efficiency and output emissions. The improvements in efficiency are being made by friction reduction, combustion improvement and thermodynamic cycle modification. Computer simulation has been developed to predict the performance of a spark ignition engine. The effects of various cylinder pressure, heat release, flame temperature, unburned gas temperature, flame properties, laminar burning velocity, turbulence burning velocity, etc. were simulated. The simulation and analysis show several meaningful results. The objective of the present study is to develop a combustion model for a spark ignition engine running with isooctane as a fuel and predicting its behavior.

• Journal of Embryo Transfer
• /
• v.12 no.2
• /
• pp.219-226
• /
• 1997

Follicular fluid influxed into the oviduct during ovulation may affect movement of sperm for fertilization Thus, in this study, the effect of follicular fluid, obtained from follicles of l0mm in diameter, on number and quality of sperm recovered by swim-up separation was investigated and sperm-movement stimulating components extracted from follicular fluid with methanol and isooctane were separated by gel filtration with Sepadex G-1O, G-25 and G-1OO gels, and were isolated by electrophoresis with SDS-PAGE mini gel. The results obtained were as follows; 1. Diluted follicular fluid stimulated sperm movement. 2. Sperm-movement stimulating factors were in methanol extract. 3. Sperm-movement stimulating effect of methanol extract appeared in fraction I among fractions recovered after gel filtration. And the fraction I contained proteins indicating 4 major bands as about 47, 43, 25 and 14 kilodaldons and 5 minor bands as about 67, 58, 23, 22 and 21 kilodaldons. 4. The fraction I recovered from G-100 gel showed significantly low percentage of motile sperm and had no protein indicating the band of 67 kilodaldons among the minor bands.

• Journal of Microbiology and Biotechnology
• /
• v.1 no.3
• /
• pp.197-201
• /
• 1991

Glycerolysis of triolein by lipase from Chromobacterium viscosum lipase was studied batchwise in AOT-isooctane reversed micelles. The reaction mixture was extracted with chloroform and the content of triolein, 1, 2-diolein, 1, 3-diolein, 1-monoolein, and free fatty acid in the condensed chloroform solution was determined using high performance liquid chromatography (HPLC). The effect of agitation speed on the initial rate of conversion was examined. As the speed of agitation increased up to 700 rpm, the reaction rate increased. However, above 700 rpm, the rate approached maximum and did not increase that much. The glycerolysis activity and the stability of the enzyme were affected by stirring and addition of histidine or copper. Addition of histidine and copper increased the rates of glycerolysis but they are detrimental to the operational stability in reversed micelles.

• Progress in Medical Physics
• /
• v.8 no.2
• /
• pp.77-85
• /
• 1997

Verification of patients setup was very important during radiotherapy. Therefore, we have developed an 1-dimensional on-line portal imaging system and measured the differential linearity of the system. Isooctane(2,2,4-TetraMethyl Pentane) was used as liquid ionization material. And the geometry of the system was designed which has 2mm position resolution and 20cm measurable range. And then the differential linearity of the system was 4.7％.