• Microbiology and Biotechnology Letters
• /
• v.39 no.2
• /
• pp.111-118
• /
• 2011

For the strain improvement of the industrial polyploid yeast strain through hybridization and protoplast fusion, a dominant selection marker other than a recessive marker such as the auxotrophic marker was required for the selection of the resulting hybrids. In the present investigation, the aureobasidin A resistant gene was tested in relation to whether it can be used as the dominant selectable marker for the isolation of hybrids of the yeast Saccharomyces. The plasmid pAUR112, carrying the gene responsible for resistance to aureobasidin A, was introduced into the haploid yeast strain K114/YIp. From the rare-mating between polyploid C6 and haploid K114/YIp carrying pAUR112, many hybrids were obtained from the agar medium containing 0.5 ${\mu}g$/ml of aureobasidin A. The hybrids exhibited characteristics derived from both of the parental strains; and the cell sizes of the hybrids were larger than those of the parental strains. These results showed that the aureobasidin A resistant gene could be successfully used as the dominant selectable marker for the isolation of yeast hybrids resulting from rare-mating.

• Korean Journal of Veterinary Service
• /
• v.25 no.2
• /
• pp.117-126
• /
• 2002

Contamination levels of pathogenic microorganisms in 145 cases of beef, which were distributed in Gwangju province, had been investigated in each distributed stage and also monitored by general bacterial count and E coli count index. General bacterial count of beef from the slaughterhouse was 10$^4$cfu/g less than the level of promotion(10 cfu/$\textrm{cm}^2$) and E coli count index was also under the level of 10$^2$cfu/$\textrm{cm}^2$ recommended level of the ministry of agriculture and forestry. Pathogenic microorganisms were detected from 23.2% of samples in the consumption stage, 12.5% in the slaughtering stage and 5.6% in the transporting and processing stage. Staphylococcus aureus was isolated in the largest number and its ratio was 9.0%, listeria monocytogenes 5.5% and salmonella spp 1.4%. There were no samples that bacteria had been detected dually. E coli O157:H7 and campylobacter jejuni were not isolated. In raw and chilled beef, isolation rate of pathogenic microorganisms were 13.3% and 16.5% each. Especially in raw beef, L monocytogenes was. isolated in 3 samples among 30 cases (10%) and S aureus in one sample (3.3%). According to a scale of meat store, isolation rates of pathogenic microorganisms were different. It was 28.6% in the small-scale meat store and 16.7% in the large-scale meat store each. Four cases (16.7%) of S aureus were isolated in the large-scale meat store and seven cases (20.0%) of L monocytogenes and 2 cases (5.7%) of salmonella spp were isolated in the small-scale meat store. S aureus was isolated in two places among 10 feeding facilities of the elementary school. This result shows that the sanitation of elementary school feeding facilities is so poor and more careful policy consideration is needed. Eleven strains of S aureus isolated showed ${\beta}$-hemolysis on blood agar, 1 strain ${\alpha}$-hemolysis, and 1 strain ${\gamma}$-hemolysis. Isolated strains of L monocytogenes were reconfirmed in 560 bp by PCR. Conclusively, these results show that the sanitary condition in the stages of slaughtering, transportation-processing and consumption influences the degree of pathogenic microorganisms contamination in beef severely It is necessary to apply thoroughly hazard analysis critical control point in a process of beef distribution and also to develop rapid test methods for microorganism diagnosis. This effort is very important for the supply of safe and clean meat from farm to table and helpful for the improvement of public health.

• Journal of Embryo Transfer
• /
• v.28 no.3
• /
• pp.199-205
• /
• 2013

The present study was conducted to compare on embryo survival rates by blastomere isolation methods, and establish the optimal PCR procedure for perform the sexing of bovine blastocysts produced by IVF. IVF embryos used in the study was used the Bisected or Sliced methods for blastomere isolation, and the survival rates of blastocyst with rapid way of sexing PCR was assessed. In the present study for survival rates in blastocyst was the total cleavage rate was 75% and a blastocyst development among cleaved embryos was 40%. Survival rate of embryos treated with intact, bisected or sliced method was 100, 63.3 or 81.3%, respectively. Therefore, survival rate of embryos treated with sliced method was higher compared to that of embryos treated with bisected method. The sexing rate of female or male was not significantly different between S4BFBR primer and BSY + BSP primer (1.75 : 1 vs. 1.43 : 1), respectively. Because of the PCR amplification using the S4BFBR primer was simpler method than multiplex PCR amplification method. Furthermore, the accuracy of sexing rate and reduction of PCR work time between 2-step and 3-step of PCR methods was 98.0% / 1.5 hr and 97.0% / 3.5 hr, respectively. Based on these results, it can be suggested that the sliced and PCR methods we developed was very effective method to reduce time consuming and procedure of PCR amplification for sexing with the increase of survival rate on the blastocyst.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.1
• /
• pp.133-138
• /
• 1983

In Korea, Brassica species planted in summer remain in rosette and do not flower. Seed production of vernalized rape seedlings grown in summer was evaluated to establish method of generation shortening and genetically pure seed production without isolation of seed fields. When vernalized rape seedlings of different maturity groups were transplanted in summer, all plants bolted and flowered, and average days from sowing to bolting and flowering was 37 and 58. respectively. It took 85days for early maturity group, 88 days for medium maturity group, and 108 days for late maturity group to mature. Seed yield of vernalized plants grown in summer was 8.8 gr per plant and 53kg per l0a which was 23% of seed yield of rape planted in autumn. However, enough seeds were produced to test oil composition and cake and to plant for a next generation. If seedlings are raised, they can be transplanted in more than 1, 000 times of original seed field, indicating that genetically pure seed can be produced without caging seed fields with nets and isolation of seed fields since other Brassica species do not flower in summer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4B
• /
• pp.388-396
• /
• 2002

In this paper, An aperture-coupled microstrip patch antenna operating at WLL frequency range(Rx : 2.3∼2.33Ghz, Tx : 2.37 ∼2.4Ghz) for WLL repeater is designed and fabricated. FR-4 epoxy substrate with 4.7 relative permittivity is inserted between feed-line and patch plane. Aperture-coupled structure is employed for consideration of bandwidth improvement and gain\`s characteristics. Air gap is arranged at each layer for bandwidth extension and radome is used as a protector in the upper patch. In this paper, both 1 port and 2 port are designed as 1$\times$2 array antenna which uses T-junction and λ$\_$g//4 transformer. Here, 1 port is used as transmitting/receiving antenna and 2 port is used as receiving antenna. Functionally independent two antennas using space diversity arrange slots between two antennas in order to be placed at the same place. As a result, we obtained a excellent isolation below -40dB and return loss is reduced by means of slots arrangement between patch and antenna.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.4
• /
• pp.71-76
• /
• 2015

Recently, light emitting diodes (LEDs) have been studied to improve their efficiencies for the uses in various fields. Particularly in the aspect of chip structure, via hole type vertical LED chip is developed for improvement of light output power, and heat dissipations. However, current vertical type LEDs have still drawback, which is current concentration around the n-contact holes. In this research, to solve this phenomenon, we introduced isolation layer under n-contact electrodes. With this sub-electrode, even though the active area was decreased by about 2.7% compared with conventional via-hole type vertical LED, we could decrease the forward voltage by 0.2 V and wall-plug efficiency was improved approximately 4.2%. This is owing to uniform current flow through the area of n-contact.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.63-72
• /
• 2010

MOV(Main Oxidizer shut-off Valves) control the combustion of launch vehicle systems by the supply and the isolation of liquid oxygen to a main combustion chamber in launch vehicle systems. Moreover, the MOV should secure a constant flow rate of liquid oxygen for combustion instability in the steady operational state. Although it has been showed that a EM(Engineering Model) with a high discharge coefficient value compared with the TM(Technology Model) fills the overall performance requirements, additional design modifications in some critical parts of the EM were conducted to improve the performance. The configurations of the pressure-control body, the middle flange, and the rips of the inlet body of the EM were modified and the performance tests have been performed with test models. Consequently, the intended improvements have been verified by the performance tests.

• The Korean Journal of Community Living Science
• /
• v.15 no.3
• /
• pp.149-165
• /
• 2004

In Korea, as the elderly population is growing, the quality of life of the rural elderly is becoming a major concern. By the way, social welfare services is less available and accessible to the rural elderly. And we have very limited information about community -oriented welfare services for the elderly. The lack of social welfare services in rural area resulted from mainly geographic isolation and economic deprivation. So, the present research aimed at; 1) to explore what the social welfare service is benefited from governmental or local assembly. 2) to explore what kind of community services is provided for the rural village and elderly. 3) to appear the political propose for the rural elderly. In South Korea, The Rural Development Administration currently operate 'villages which is supported special programs for the improvement of QOL of rural elderly' in 110 villages. It is a model governmental welfare service for rural area. For the purpose, the survey data is gathered from community level data per village (107 villages), individual survey data(881people) who live in the village and qualitative data. Two kinds of quantitative data is combined to form a data. The statistical methods used for data analysis are descriptive statistics, t-test and ANOVA. The major findings of this study were as follows : It was founded that the majority family type of the rural elderly is elderly-only households(75%). In case of poor elderly, they have very limited social insurance benefit and they can not get medical services with satisfaction. The result show that the welfare facilities per village and welfare service for the elderly is extremely low while the needs of welfare service is greate high. A distinctive characteristics in rural villages is that they receive a lot of services from private sectors, like as Women Farmers Union, Adult Union. They operate voluntary welfare services related to food supporting, education for the elderly, free haircut services and so on. In conclusion, the community care services from private sector has specialty in rural area. We conclude it is a distinguishing characteristic of rural community.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.1
• /
• pp.22-28
• /
• 2012

While a dash panel component, close to passengers, plays a very important role to protect heat and noise from a power train, it is also a main path that transfers vibration energy and eventually radiates acoustic noise into the cavity. Therefore, it is important to provide optimal design schemes incorporating sound packages such as a dash isolation pad and a floor carpet, as well as structures. The present study is the extension of the previous investigation how design variables affect sound radiation, which was carried out using the simple plate and framed system. A novel FE-SEA hybrid simulation model is used for this study. The system taken into account is a dash panel component of a sedan vehicle, which includes front pillars, front side members, a dash panel and corresponding sound packages. Design variables such as panel thicknesses and sound packages are investigated how they are related to two main NVH indexes, sound radiation power(i.e. structure-borne) and sound transmission loss(i.e. air borne). In the viewpoint of obtaining better NVH performance, it is shown that these two indexes do not always result in same tendencies of improvement, which suggests that they should be dealt with independently and are also dependent on frequency regions.

• Korean Journal of Microbiology
• /
• v.33 no.1
• /
• pp.31-37
• /
• 1997

Intergeneric hybrids between Aspergillus niger and Perricillium ch~y.sop~um(Tyr ), hyperlipolytic enzyne-producing fungi, were obtained by nuclear transfer technique:. Optimal conditions for formation of intergeneric hybrids were investigated. Maximum production of protoplasts were obtainrd by 1% Novozym 234 at $30^{\circ}C$ for 3 hrs and the most effective osmotic stabilizers for the isolation of protoplasts were 0.6 M KC]. Frequencies of hybrid formation by nuclear transfer were $1.3{\times}$10^{-3}$$ $-3.8{\times}$10^{-3}$$. From the chervation of genetic stability, conidial size, DNA content, ;md nuclear stain, it was suggested that their karyotypes are aneuploid. The hybrids showed 1.4-2.2 fold higher lipase activities than parental strains. It was strongly supported by results of this study that nuclear transfer technique is much more efficient in the formation of intergeneric hybrids than protoplast fusion and is very useful for the improvement of strains.