• Korean Journal of Materials Research
• /
• v.21 no.2
• /
• pp.106-110
• /
• 2011

A high thermal conductive AlN composite coating is attractive in thermal management applications. In this study, AlN-YAG composite coatings were manufactured by atmospheric plasma spraying from two different powders: spray-dried and plasma-treated. The mixture of both AlN and YAG was first mechanically alloyed and then spray-dried to obtain an agglomerated powder. The spray-dried powder was primarily spherical in shape and composed of an agglomerate of primary particles. The decomposition of AlN was pronounced at elevated temperatures due to the porous nature of the spray-dried powder, and was completely eliminated in nitrogen environment. A highly spherical, dense AlN-YAG composite powder was synthesized by plasma alloying and spheroidization (PAS) in an inert gas environment. The AlN-YAG coatings consisted of irregular-shaped, crystalline AlN particles embedded in amorphous YAG phase, indicating solid deposition of AlN and liquid deposition of YAG. The PAS-processed powder produced a lower-porosity and higher-hardness AlN-YAG coating due to a greater degree of melting in the plasma jet, compared to that of the spray-dried powder. The amorphization of the YAG matrix was evidence of melting degree of feedstock powder in flight because a fully molten YAG droplet formed an amorphous phase during splat quenching.

• Computational Structural Engineering
• /
• v.3 no.3
• /
• pp.101-111
• /
• 1990

The elastic analysis of floor slabs using the p-version of finite element method encounters stress singularities at certain types of reentrant corners, openings and cut-outs. Results obtained using the computer code based on C.deg. - hierarchic plate element formulated by Reissner-Mindlin theory are compared with theoretical predictions and with computational results reported in the literature. The convergence rate of h-, p- and hp-version can be estimated on the basis of the energy norm in global sense. If accuracy in terms of the number of degree-of-freedom is used as a criterion, the solutions presented here are the most efficient that have been published up to date. Examples are the rhombic plate with the obtuse angle of 150.deg. and the square plate with cut-outs.

• Journal of Powder Materials
• /
• v.22 no.2
• /
• pp.134-137
• /
• 2015

The monolayer engineering diamond particles are aligned on the oxygen free Cu plates with electroless Ni plating layer. The mean diamond particle sizes of 15, 23 and $50{\mu}m$ are used as thermal conductivity pathway for fabricating metal/carbon multi-layer composite material systems. Interconnected void structure of irregular shaped diamond particles allow dense electroless Ni plating layer on Cu plate and fixing them with 37-43% Ni thickness of their mean diameter. The thermal conductivity decrease with increasing measurement temperature up to $150^{\circ}C$ in all diamond size conditions. When the diamond particle size is increased from $15{\mu}m$ to $50{\mu}m$ (Max. 304 W/mK at room temperature) tended to increase thermal conductivity, because the volume fraction of diamond is increased inside plating layer.

• Journal of Powder Materials
• /
• v.21 no.2
• /
• pp.97-101
• /
• 2014

The 304 stainless steel powders were prepared by high energy ball milling and subsequently sintered by spark plasma sintering, and the microstructural characteristics and micro-hardness were investigated. The initial size of the irregular shaped 304 stainless steel powders was approximately 42 ${\mu}m$. After high energy ball milling at 800 rpm for 5h, the powders became spherical with a size of approximately 2 ${\mu}m$, and without formation of reaction compounds. From TEM analysis, it was confirmed that the as-milled powders consisted of the aggregates of the nano-sized particles. As the sintering temperature increased from 1073K to 1573K, the relative density and micro-hardness of sintered sample increased. The sample sintered at 1573K showed the highest relative density of approximately 95% and a micro-hardness of 550 Hv.

• Journal of Korean Neurosurgical Society
• /
• v.45 no.2
• /
• pp.99-102
• /
• 2009

Inflammatory pseudotumor is an uncommon lesion with unknown etiology characterized by sclerosing inflammation which clinically and radiographically mimics a neoplastic lesion. A 47-year-old man presented with sudden headache and dysarthria. Brain CT scan revealed a $2.6{\times}2.2\;cm$ sized, round, and hyperdense mass in the anterolateral wall of the left lateral ventricular trigone. On MR imaging studies, the mass showed low signal intensity in the wall of the trigone on T2-weighted image, central mixed (iso- and high-) signal intensity with peripheral low-signal intensity on T1-weighted image. Subtle staining of left choroid plexus with irregular shaped distal branch of anterior choroidal artery was found on the cerebral angiography. These findings suggested a small tumorous lesion originated from the left choroid plexus. During the hospital days, the mass manifested as repeated hemorrhages. The mass was successfully removed via left occipital transcortical approach. The histopathological report of the specimen was hemorrhage and fibrosis, with dense lymphoplasma cell infiltration, suggestive of an inflammatory pseudotumor.

• Transactions of Materials Processing
• /
• v.27 no.5
• /
• pp.314-322
• /
• 2018

AlSi12 is a heat-resistant aluminum alloy that is lightweight, corrosion-resistant, machinable and attracting attention as a functional material in aerospace and automotive industries. For that reason, AlSi12 powder has been used for high performance parts through 3D printing technology. The purpose of this study is to observe deposition characteristics of AlSi12 powder in a direct energy deposition (DED) process (one of the metal 3D printing technologies). In this study, deposition characteristics were investigated according to various process parameters such as laser power, powder feed rate, scan speed, and slicing layer thickness. In the single track deposition experiment, an irregular bead shape and balling or humping of molten metal were formed below a laser power of 1,000 W, and the good-shaped bead was obtained at 1.0 g/min powder feed rate. Similar results were observed in multi-layer deposition. Observation of deposited height after multi-layer deposition revealed that over-deposition occurred at all conditions. To prevent over-deposition, slicing layer thickness was experimentally determined at given conditions. From these results, this study presented practical conditions for good surface quality and accurate geometry of deposits.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.19 no.5
• /
• pp.229-238
• /
• 2015

For small-size reinforce-concrete buildings, Midas Gen, OpenSees, and Perform-3D, which are structural analysis programs that are most popularly used at present, were applied for nonlinear static pushover analysis, and then difference between those programs was analyzed. Example buildings were limited to 2-story frames with irregular shaped walls. Analysis result showed that there were more differences than for frames only and frames with rectangular walls, but it was not so significant. Nevertheless, the capacity curve were different in some buildings, which is attributed to shape and location of walls, and feature of the analysis program. Especially, selection of automatic or manual input in Midas Gen, or nonlinear wall elements in Perform3D can affect the capacity curve and performance of the buildings. Therefore, the program users should understand the feature of the program well, and then conduct performance assessment. The result of this study is limited to low-story buildings so that it should be noted that it is possible to get different results for mid- to high-rise buildings.

• Wind and Structures
• /
• v.7 no.3
• /
• pp.159-172
• /
• 2004

The study of how buildings affect wind flow is an important part of the research being conducted on urban climate and urban air quality. NJU-UCFM, a standard $k-{\varepsilon}$ turbulence closure model, is presented and is used to simulate how the following affect wind flow characteristics: (1) an isolated building, (2) urban canyons, (3) an irregular shaped building cluster, and (4) a real urban neighborhood. The numerical results are compared with previous researchers' results and with wind tunnel experiment results. It is demonstrated that the geometries and the distribution of urban buildings affect airflow greatly, and some examples of this include a changing of the vortices behind buildings and a "channeling effect". Although the mean air flows are well simulated by the standard $k-{\varepsilon}$ models, it is important to pay attention to certain discrepancies when results from the standard $k-{\varepsilon}$ models are used in design or policy decisions: The standard $k-{\varepsilon}$ model may overestimate the turbulence energy near the frontal side of buildings, may underestimate the range of high turbulence energy in urban areas, and may omit some important information (such as the reverse air flows above the building roofs). In ideal inflow conditions, the effects of the heights of buildings may be underestimated, when compared with field observations.

• Journal of the Korean Ceramic Society
• /
• v.33 no.8
• /
• pp.849-854
• /
• 1996

boehmite which is the by-product in alcohol process contains anions such as $Cl^-,{NO_3}^-.or\; CH_3COO^-$ Influe-nce of these anions was studied on properties of $\alpha$-alumina powders prepared by treating the transformed ${\gamma}$-alumina with the alumina sol and $\alpha$-alumina seeds (d_{50}=0.36\mu\textrm{m}$) Disperal 20/1 and 10/1 containing $Cl^-$ produced spherical powder Disperal 20/2 with ${NO_3}^-$ produced equiaxed powder and Disperal 10/3 with $CH_3$ $COO^-$ irregular shaped and sized powder. All of these $\alpha$-alumina powders were submicron. Although the green density of the alumina powder derived from Disperal 10/1 by calcination at $1200^{\circ}C$/1h. was 53% it did not sinter even at $1550^{\circ}C$ for 2h. which implies that its d50 is greater than $3\mu\textrm{m}$. The others gave green densities in the range of 44~47% but they sintered as well as the AKP-30 at $1500^{\circ}C$/2 h or $1550^{\circ}C$/2 h.

• Journal of Korean Society of Forest Science
• /
• v.82 no.1
• /
• pp.7-11
• /
• 1993

The swollen tissue of wound origin formed after nailing ㄷ-shaped fastener to a stem of Platanus occidentalis L. was compared with normal tissue in the qualitative and quantitative anatomical aspects. The swollen tissue appeared to differ from normal tissue in irregular cell orientation, occurrence of tyloses in vessel element, less common appearance of pore multiples, narrower and shorter vessel element, lower vessel frequency, shorter and highly thick-walled wood fiber, greater number of bars per scalariform perforation plate in vessel element, larger ray frequency, larger ray width and lower ray height.