• Analytical Science and Technology
• /
• v.11 no.3
• /
• pp.189-193
• /
• 1998

Binary alloys, $MoRu_3$ and $MoRh_3$, have been prepared using arc melting furnace. Mo and the noble metals Ru and Rh are the constituents of metallic insoluble residues, which were found in the early days of the post-irradiation studies on uranium oxide fuels. Detailed structural informations about these alloys have not been reported on JCPDS files of ICDD (International Centre for Diffraction Data). The results of X-ray diffraction study showed that the alloy was crystallized in hexagonal close-packing, well known as ${\varepsilon}$-phase. The X-ray diffraction patterns of these alloys matched well to that of $WRh_3$ with $P6_3/mmc$ of space group. The lattice parameters, a and c, were calculated using the least squares extrapolation. It was found from X-ray photoelectron spectroscopic measurements that Mo on the surface of the alloy was oxidized to Mo(6+), which could be removed by sputtering with Ar ions for approximately 15 minutes. The changes in binding energy of Mo, Ru, and Rh on the surface of the alloy were not observed. Magnetic susceptibility measurements resulted in the typical Pauli-paramagnetic behavior in the temperature range of 2 to 300 K.

• Applied Biological Chemistry
• /
• v.18 no.1
• /
• pp.23-29
• /
• 1975

This experiment was conducted to study the effects of temperature and pH upon the acid productivity of the acid producing mutant induced by the treatment of ultraviolet light, and to identify the producing acid by PPC and p-oxydiphenyl method. Chemical composition of Takju mash brewed with selected yeast and producing acid were observed and the results were as follows. 1) There was no apprecible difference in acid producing activity of mutant at $25^{\circ}C\;to\;30^{\circ}C$. 2) The acid producing activity of mutant was little below pH 4 and was gradually increased according to approach nenutral, and the accumulation of acid was amounted to 0.5-0.7% as a lactic acid at pH 5 to 7 within 48 hrs of fermentation. 3) The acid produced by mutant was detected to the lactic acid. 4) In the cases of the Takju was brewed with the starter from the acid producing mutant the requirement of Ipkuk was 5% for all the raw materials, on the contrary, using orginal strain the requirement of Ipkuk was 20%. 5) In the case of both starters from the acid producing mutant and orginal strain were added at different brewing times, and only Bunkuk was used as a saccharifying agent (without Ipkuk), Takju was able to brewed more repidly and successfully than the case of general process.

• Korean Journal of Food Science and Technology
• /
• v.15 no.3
• /
• pp.238-244
• /
• 1983

The cooking quality of irradiated chestnut after longterm storage were evaluated. 1. Color degree and tannin content of irradiated chestnut were slightly increased with the storage, but there was a little difference according to the radiation dose after nine months storage. 2. The main component of free sugars in the irradiated chestnut were identified as sucrose, glucose, fructose and the amino acids of chestnut were identified in the decreasing order of glutamic acid, aspartic acid, leucine, arginine, glycine, alanine, serine, pheylalanine, threonine, valine, isoleucine, tyrosine, methionine and cystein. Free sugars and amino acids of 25 Krad irradiated group showed a little difference compared with those of control group after nine months storage. 3. The calorie of candied chestnut prepared from nine months stored was marked 199 Kcal/100g of edible parts compared with 159 Kcal of raw chestnut. 4. Texture and sensory evaluation of candied chestnut prepared from nine months stored were better in 20-25 Krad irradiated group than in control group.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.3
• /
• pp.284-294
• /
• 2006

Statement of problem. Proliferation of Candida albicans is primarily within the plaque on the fitting surface of the denture rather than on the inflamed mucosa. Consequently, the treatment of the denture is equally important as treatment of the tissue. Cleansing and disinfection should be efficiently carried-out as the organisms can penetrate into the voids of the acrylic resin and grow in them, from which they can continue to infect and reinfect bearing tissues. Purpose. The purpose of this study was to evaluate the applicability of photocatalytic reaction to eliminate Candida albicans from acrylic resin denture base, and to investigate the anti-fungal effect with various UVA illumination time. Materials and Methods. The specimens were cured by the conventional method following the manufacturer's instruction using thermal polymerized denture base resin (Vertex RS: Dentimex, Netherlands). $TiO_2$ photocatalyst sol(LT), which is able to be coated at normal temperature, was made from the Ti-alkoxide progenitor. The XRD patterns, TEM images and nitrogen absorption ability of the $TiO_2$ photocatalyst sol(LT) were compared with the commercial $TiO_2$ photocatalyst P-25. The experimental specimens were coated with the mixture of the $TiO_2$ photocatalyst sol(LT) and binder material (silane) using dip-coater, and uncoated resin plates were used as the control group. Crystallinity of $TiO_2$ of the specimen was tested by the XRD. Size, shape and chemical compositions were also analyzed using the FE-SEM/ EDS. The angle and methylene blue degradation efsciency were measured for evaluating the photocatalytic activity of the $TiO_2$ film. Finally, the antifungal activity of the specimen was tested. Candida albicans KCTC 7629(1 ml, initial concentration $10^5$ cells/ ml) were applied to the experiment and control group specimens and subsequently two UVA light source with 10W, 353 nm peak emission were illuminated to the specimens from 15cm above. The extracted $2{\mu}l$ of sample was plated on nutrient agar plate ($Bacto^{TM}$ Brain Heart Infusion; BD, USA) with 10 minute intervals for 120 minute, respectively. It was incubated for 24 hours at $37^{\circ}C$ and the colony forming units (CFUs) were then counted. Results. Compared the characteristics of LT photocatalyst with commercial P-25 photocatalyst, LT were shown higher activity than P-25. The LT coated experimental specimen surface had anatase crystal form, less than 20 nm of particle size and wide specific surface area. To evaluate the photocatalytic activity of specimens, methylene blue degradation reaction were used and about 5% of degradation rate were measured after 2 hours. The average contact angle was less than $20^{\circ}$ indicating that the LT photocatalyst had hydrophilicity. In the antifungal activity test for Candida albicans, 0% survival rate were measured within 30 minute after irradiation of UVA light. Conclusion. From the results reported above, it is concluded that the UVA-LT photocatalytic reaction have an antifungal effect on the denture surface Candida albicans, and so that could be applicable to the clinical use as a cleaning method.

• Applied Biological Chemistry
• /
• v.30 no.2
• /
• pp.118-125
• /
• 1987

Three rice varieties of Akibare (japonica), Milyang 30 (indica) and Taebaeg (indica) were investigated for their changes in sensory and physical qualities of cooked rices during storage at the temperature range of $4^{\circ}C$ and $70^{\circ}C$ for 25 hours, The qualities studied were sensory attributes of texture which were evaluated by multiple comparison method and physical characteristics of texture measured using with rheometer. Physical Properties of hardness, adhesiveness and elasticity of cooked rices were found to be different among the rice varieties and were affected by storage conditions. Higher values in hardness and elasticity and lower values in adhesiveness were measured for cooked rices of Akibare immidiately after cooking. Those physical values were changed by a steady decrease in hardness and elasticity and increase in adhesiveness during storage for 25 hours. Correlations between sensory and physical characteristics of texture was found a significant relationships between gumminess and hardness (r=0.696), gumminess and adhesiveness (r=-0.800) and gumminess and elasticity (r=0.806).

• Journal of Ginseng Research
• /
• v.20 no.4
• /
• pp.501-519
• /
• 1996

There are two kinds of commercially available ginseng root, red ginseng and white ginseng processed from fresh ginseng root Those ginsengs are primary product from fresh ginseng root and have the characteristic of keeping their original root shape Processed ginseng products are made from either red ginseng or white ginseng by way of complicated process of pulverization. Extraction. Condensation, fettering, sterilization, etc. Among them there are extracts. extract powder, powder, capsules tablets, Candy, drinks, nectar, jelly, gums. chicken soup. tonic. etc. to meet the demand for consumer's pretheronce . The 200 kinds of processed secondary products are approximately produced in the form of 20 kinds of ginseng products by about 60 domestic companies. In spite of about 213.000 million won of domestic market in 1993. it seems like that the ginseng market of the future has not a good prospects The total market sale of white ginseng in Korea has been continuously decreased since 1991 And 963 tons of white ginseng was consumed in domestic market in 1993 The domestic market sales of white ginseng in origina1 root shave. was 90, 000 million won in 1993 and market price of the fine root used as a source of processed products has not been changed in these ten years. The total market sale of red ginseng and its processed products was 58, 000 million won in 1993 9.800 mi11ion won of red ginseng in original root shape and 48.000mi11ion of processed red ginseng product. Ginseng products such as extracts, drinks, teas and tonics etc atre mostly exported to south-east Asia. And the total exports of ginseng pi.oducts (extracts, drinks teas) decreased to 54 million dollars in 1994, compared with 85 million dollars in 1992. Despite of extensive knowledge about ginseng little is still known about the development of new processed ginseng pl.oducts because of "Know-How". Some papars have presented the effects of extracting method(amounts of solvent. time. temperature, equipment. etc.) on the quality and yields of ginseng extr acts. Also. some researchers have carried out a few studies on the poriflcation of the extracts and the amounts of precipitation in the drink at variotas pH during the storage for preventinly drink from precipitation. A fell studies on the preservation of Korean ginseng powder. tea. Extract powder by irradiation and ozone treatment have been reported by some researcher for the improvement hygienic quality of ginseng products There are also some reports about the effects of ginseng components on the acid production by lactic acid bacteria or acetic acid bacteria. and alcohol production by yeast for the development of new ginseng products processed by fermentation. To make ginseng more able to contribute to the health of mankind in the future. consistent and considerable efforts should be focussed on improving the taste of ginseng and developing various new product as a health food or a function food.tion food.

• Journal of the Korean Chemical Society
• /
• v.25 no.6
• /
• pp.367-375
• /
• 1981

Single crystals of Potassium Sulfate ($K_2SO_4$) have been grown from the saturated solution by the evaporation method at the optimum conditions. Radiation damages in the crystal by ${\gamma}$-irradiation of about $12{\times}10^6$ Roentgen have given rise to paramagnetic centers or paramagnetic defects. Electron spin resonance (ESR) spectra of the centers are obtained with the X-band EPR spectrometer at room temperature. The ESR peaks of the paramagnetic species are found to be anisotropic but the peak of $SO_3-$ radical is an isotropic of Gaussian shape at g = 2.0036. A number of ESR spectra of the crystal for angular variation of the anisotropic peaks are recorded at various orientations of rotation about a, b and c crystallographic axes respectively. The g-values are calculated from the line position between anisotropic peaks and the isotropic one and then principal g-values and its direction cosines of the species are obtained by diagonalization of 9 matrix elements of the corresponding g-values. All the paramagnetic defects are identified by the characteristic principal g-values and its direction cosines.

• Journal of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.244-254
• /
• 1983

Single crystals of sodium thiosulfate $(Na_2S_2O_3) have been grown from the saturated solution by the evaporation method at the optimum condition. Radiation damages in the crystal by ${\gamma}$-irradiation of $20{\times}10^6$ Rontgen have given rise to paramagnetic centers. The anisotropic spectra of each paramagnetic species have been obtained with the X-band EPR spectrometer at room temperature. When an isotropic D.P.P.H. at g value of 2.0036 is based on. ESR Spectra of the single crystal are recorded for each rotation about the perpendicular a, b and c axis with intervals of $10^{\circ}$ from $0^{\circ}$to $180^{\circ}$ in order to find out the properties of the crystal for anglar variation of the anisotropic peaks. The g values are calculated from the line position between the anisotropic peaks and the isotropic peaks of D.P.P.H. and then principal g values and their direction cosines of the species is obtained by the diagonalization of 9 matrix elements of the corresponding g values. From the analysis of the characteristic principal g values and direction cosines for ${\gamma}$-irradiated $Na_2S_2O_3$ crystal, anisotropic peaks corresponding to $SO_2^+, SO_2^- $are identified and the existences of unidentified and unstable paramagnetic defects are verified.

• Clean Technology
• /
• v.23 no.2
• /
• pp.196-204
• /
• 2017

CdZnS/ZnO composite was prepared through low-temperature precipitation and drying method. The property of CdZnS/ZnO as a recyclable photocatalyst for the degradation of rhodamine B (RhB) under visible light irradiation was examined. The sample was characterized by XRD, FE-SEM, XPS, UV-vis DRS and photoluminescence techniques before and after repeated reaction to investigate the change of properties during the photocatalytic reaction. During repeated reaction, the CdZnS/ZnO showed an improved photocatalytic activity and recycle stability. Among two feasible reaction pathways for photocatalytic degradation of RhB, the cleavage of conjugated chromophore was found to predominate over N-dealkylation of chromophore skeleton in the present work. The results indicate that the CdZnS/ZnO, prepared by a simple precipitation method, can be used as a visible-light driven photocatalyst with enhanced cycle stability and activity.

• Korean journal of applied entomology
• /
• v.42 no.2
• /
• pp.145-152
• /
• 2003

Field application of the entomopathogenic nematode, Steinernema carpncapsae, is limited by its susceptibility to UV irradiation and desiccation especially at leaf spray control. This study was conducted to develop the control technique using alginate biocapsulation of the nematodes against the beet armyworm, Spodoprera exigua and the tobacco cutworm, Sp. litura that are normally infesting hosts above ground level. The alginate capsules including infective juveniles gave significant feeding toxicities to the larvae of the two lepidopteran species. The lethality followed a typical sigmoid dose-mortality pattern with increase of the nematode densities embedded in the capsules. Moisture content in the capsule was critical to the survival of the infective juveniles. More than 80% nematodes could survive above 10% moisture content remained in the capsule. Remaining moisture content within the capsule was dependent on relative humidity, ambient temperature, and capsule size, but not on citric acid reaction time during capsule formation. More than 80% of infective juveniles in the alginate capsules could survive in distilled water at 15$^{\circ}C$ for 60 days. When these nematode capsules containing welsh onion extract as another phagostimulant were applied on the 3rd instar larvae of Sp. exigua infesting peanut plants, they resulted in about 90% control efficacy. These results indicate that the alginate capsulation can be used for leaf-spray agent of the entomopathogenic nematodes as well as for improved storage purpose.