• 제목/요약/키워드: Iron compound

검색결과 179건 처리시간 0.029초

A New Porous Carbon via an Exfoliation of n-Octylammonium Tetrachloroferrate(III)-Graphite Intercalation Complex

  • 권채원;김동훈;최진호
    • Bulletin of the Korean Chemical Society
    • /
    • 제19권10호
    • /
    • pp.1113-1116
    • /
    • 1998
  • A new graphite intercalation compound (GIC), n-octylammonium tetrachlorofeffate(Ⅲ)-graphite, has been derived from well-known ferric chloride graphite intercalation compound. X-ray diffration study shows that the basal spacing of this new GIC is 20.8 Å. In order to investigate the local geometry around the iron atom in the graphite layers, X-ray absorption spectroscopy experiments were performed. The first discharge capacity of its exfoliated form is found to be 862 mAh/g, which is more than double the value of pristine graphite (384 mAh/g). Such a drastic increase implies that the exfoliated graphite is a promising electrode material.

주철의 가스질화침탄처리 (A Study on the Gaseous Nitrocarburising of Cast Irons)

  • 김영희;윤희재
    • 열처리공학회지
    • /
    • 제16권2호
    • /
    • pp.71-77
    • /
    • 2003
  • We investigate the phase formation in the compound layer of cast irons during the gaseous nitrocarburising of four different cast irons, that contain different types of graphites in the shape and size. We examine the change in the surface roughness with the nitrocarburising time. The observation of cross-sectional microstructure and X-ray diffraction analysis indicate that the compound layer consists of single ${\varepsilon}-Fe_{2-3}(N,C)$ phase and that its thickness increases in a parabolic manner with the treatment time. The surface roughness parameters, Rz and Ra increase with increasing treatment time. In other words, the roughness parameters increase as the thickness of compound layer increases. The parameters also depend on the shape and size of graphite in the individual cast irons.

FeaSibCcHd 박막의 물리·화학 및 광학적 특성 (The Physicochemical and Optical Characteristics of FeaSibCcHd Films)

  • 김경수;전법주;정일현
    • 공업화학
    • /
    • 제10권1호
    • /
    • pp.105-111
    • /
    • 1999
  • 현재 iron silicide막을 제작하고 있는 방법은 열처리를 수행함으로써 막의 계면 상태가 좋지 않으나 플라즈마를 이용하였을 때는 열처리를 수행하지 않으므로 양질의 막을 얻을 수 있다. 본 실험에서 제작된 막은 Raman 스펙트럼 $250cm^{-1}$에서 나타난 Fe와 Si의 진동모드와 FT-IR에 의해 유기화합물 뿐만 아니라 Fe-Si의 결합이 형성되었음을 확인하였다. 또한 플라즈마의 높은 에너지에 의해 낮은 기판 온도에서 에피택시 성장이 진행되는 동안 iron silicide는 [220]/[202], [115] 등과 같은 격자구조를 갖는 ${\beta}$-상으로 성장하였다. 제조된 막의 band gap은 1.182~1.174 eV의 값을 가지고, 광학적 에너지갭을 3.4~3.7 eV의 값을 나타내었다. 막 내의 유기화합물에 의해 유발되는 Urbach tail과 sub-band-gap 흡수가 관측되었다. 따라서 플라즈마를 이용하여 제작된 막은 단일결정이 성장되어 양질의 박막을 얻을 수 있음을 확인하였다.

  • PDF

카테콜 치환체를 가진 세파로스포린계 항생제 LB10522의 작용기전 (Action Mechanism of LB10522, a New Catechol-Substituted Cephalosporin)

  • 김무용;오정인;백경숙;김인철;곽진환
    • 약학회지
    • /
    • 제40권1호
    • /
    • pp.102-111
    • /
    • 1996
  • LB10522 is a new parenteral broad spectrum cephalosporin with a catechol moiety at C-7 position of beta-lactam ring. This compound can utilize tonB-dependent iron transp ort system in addition to porin proteins to enter bacterial periplasmic space and access to penicillin-binding proteins (PBPs) which are the lethal targets of ${\beta}$-lactam antibiotics. The chelating activity of LB10522 to metal iron was measured by spectrophotometrically scanning the absorbance from 200 to 900nm. When $FeCl_3$ was added, optical density was increased between 450 and 800nm. LB10522 was more active against gram-negative strains in iron-depleted media than in iron-replete media. This is due to the increased expression of iron transport channels in iron-depleted condition. LB10522 showed a similar activity against E. coli DC2 (permeability mutant) and E. coli DCO (wild type strain) in both iron-depleted and iron-replete media, indicating a minimal permeaility barrier for LB10522 uptake. LB10522 had high affinities to PBP 3 and PBP 1A, 1B of E. coli. By blocking these proteins, LB10522 caused inhibition of cell division and the eventual death of cells. This result was correlated well with the morphological changes in E. coli exposed to LB10522. Although the in vitro MIC of LB10522 against P. aeruginosa 1912E mutant (tonB) was 8-times higher than that of the P. aeruginosa 1912E parent strain, LB10522 showed a similar in vivo protection efficacy against both strains in the mouse systemic infection model. This result suggested that tonB mutant, which requires a high level of iron for normal growth, might have a difficulty in surviving in their host with an iron-limited environment.

  • PDF

백제 관모에 사용된 직물 연구 (A Study of the Fabrics Used for the Official Hats in Baekje Dynasty)

  • 백윤미
    • 복식
    • /
    • 제59권3호
    • /
    • pp.82-95
    • /
    • 2009
  • The kind and the use of the fabrics for crown manufacture in the Baekje period has been studied by characterizing the imprinted fabrics on the crowns and the diadem ornaments from the old tomb. The contact region with the skin inside of the crown and the region between the bark of white birch and the gilt bronze openwork plates contained fabrics. The fabrics used in the gilt-bronze crown were all plain weave silk except that of Yongwonri tomb where loosely woven thin tabby was used. There have been 4-types of iron framed diadem of the Baekje, which comprise the inverted triangle-shaped diadem only with iron frame, the diadem with gold plate ornament in the iron frame, the diadem decorated with mica plate and gold plate, and the diadem with silver ornament in the iron frame. The fabrics used in the triangle shaped iron frame diadem include plain weave silk, irregular plain woven silk, thin tabby, complex silk gauze, twill weave on plain ground, and warp-faced compound weave. The iron frames were wrapped with the fabrics from one layer up to three layers, and the iron diadem was covered with one later of loosely woven textile such as irregular plain woven silk, thin tabby, and complex silk gauze. But in case of decorating the iron diadem with gold Plate ornaments, multiple layers of fabric were used to sustain the weight of the ornaments. The fabrics in the iron diadem frame were sewed with running stitch, overedge stitch or hemming stitch, diagonal hemming stitch, half back stitch), and overcast stitch.

철 석출장치가 결합된 무산소.호기공정에 의한 인 제거 특성 (Phosphorus Removal (Characteristics by Anoxic Oxic Process) by Anoxic and Oxic Processed Combined with Iron Electrolysis)

  • 김민호;김영규;김수복
    • 한국환경보건학회지
    • /
    • 제36권6호
    • /
    • pp.502-509
    • /
    • 2010
  • In this study, the (phosphorous removal) the characteristics of phosphorous removal due to (the iron compound precipitated) iron compound precipitation by iron electrolysis in (the anoxic. oxic process) anoxic and oxic processes (equipped with the) in an iron precipitation device were analyzed. During the device operation period, the average concentration of BOD, T-N, and T-P were 219.9 mg/l, 54.6 mg/l and 6.71 mg/l, respectively. The BOD/$COD_{Cr}$ ratio was 0.74, and the BOD/T-N and BOD/T-P ratios were 4.0 and 32.8, respectively. The removal rate of (the organic matters) organic matter (BOD and $COD_{Cr}$) was very high at 91.6% or higher, and that of nitrogen was 80.5%. The phosphorous concentration (of the final) in the treated water was 0.43 mg/l (0.05-0.74 mg/l) on average, and the removal efficiency was high at 90.8%. The soluble T-P concentrations in (an) the anoxic reactor, oxic reactor (II) and final treated water were 1.99 mg/l, 0.79 mg/l and 0.43 mg/l, respectively, which indicated that the phosphorous concentration in the treated water was very low. Regardless of the changes in the concentrations of (organic matters) organic matter, nitrogen and phosphorous in the influent, the quality of the treated water was relatively stable and high. The removal rate of T-P somewhat increased with the increase in the F/M ratio in the influent, and it also linearly increased in proportion to the T-P loading rate in the influent. In the treatment process used in this study, phosphorous was removed (using) by the precipitated iron oxide. Therefore, the consumption of organic (matters) matter for biological phosphorus removal was minimized and (most of the organic matters were) was mostly used as the organic carbon source for the denitrification in the anoxic reactor. This (can be an economic) treatment process (without the need for the supply of additional organic matters) is economic and does not require the supply of additional organic matter.

Removal of TCE using zero valent iron (ZVI) with other contaminants

  • 조현희;박재우
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2002년도 총회 및 춘계학술발표회
    • /
    • pp.58-61
    • /
    • 2002
  • An alternative to pump and treat groundwater remediation is the use of reactive barriers. Zero valent iron (ZVI) is particularly useful as a reductant of chlorinated hydrocarbons because of its low cost and lack of toxicity ZVI can drive the dechlorination of chlorinated organic compounds and the reduction of chromium from the Cr(Ⅵ) to the Cr(III) state. The contaminants in subsurface environment usually exist as the mixed compounds. Therefore, the objective of this research is to study the effect of the other compounds on TCE removal by ZVI. The removal mechanism of TCE by ZVI is separated the dechlorination and sorption. TCE removal by ZVI slightly increased in presence of naphthalene as the non-reduced compound. TCE removal by ZVI remarkable decreased in presence of carbon tetrachloride, nitrate, and chromate as the reduced compounds. This research suggests that the effect of the coexisted compounds on the removal chlorinated compounds by reactive barrier technology should be considered for practical application.

  • PDF

주철(鑄鐵)의 기지조직(基地組織)에 미치는 Mischmetal Hydride의 첨가효과(添加效果) (Matrix Development in Cast Iron by Addition of Mischmetal Hydrides)

  • 최답천;진영철
    • 한국주조공학회지
    • /
    • 제8권4호
    • /
    • pp.422-428
    • /
    • 1988
  • In this study we have investigated the effects of Mm, MmH and $MmH_2$ on the matrix development in cast iron, The conclusive summary is as follows: The spheroidal graphite was observed when 0.5wt.% or more of mischmetal was added and the matrix was of ledeburite structure, but bull's eye structure was not observed. On the other hand, the bull's eye structure was observed when 0.25wt.% of MmH, or 0.25wt.% to 0.5wt.% of $MmH_2$ was added. Above limit of the additives, the matrix changed into ledeburite structure. As the hydrogen content of mischmetal compound increased from MmH, the range of additives to obtain bull's eye structure expanded. This reveals the significant effect of mischmetal hydride on matrix development in cast iron and the possibility of practical use of the additives.

  • PDF

Olefin Polymerization Activity and Crystal Structure of Alkyliron(Ⅲ) Porphyrin Complexes

  • Oh, Yung-Hee;Swenson, Dale;Goff, Harold M.
    • Bulletin of the Korean Chemical Society
    • /
    • 제24권2호
    • /
    • pp.167-172
    • /
    • 2003
  • Alkyliron(Ⅲ) porphyrins, n-butyliron(Ⅲ) tetraphenylporphyrin, (TPP)Fe-Bu and n-butyliron(Ⅲ) tetrakis-(pentafluorophenyl)porphyrin, $(F_{20}TPP)Fe-Bu$ have been evaluated as suitable for olefin free-radical polymerization. Butyl radicals dissociated from n-butyliron(Ⅲ) porphyrin initiated the polymerization reaction, but the ratio of the propagation was low. The GCMS analysis of the reaction mixture of nbutyliron(Ⅲ) porphyrin and styrene has revealed several products containing two butyl groups, while traces of b-hydrogen-abstracted products were observed. The crystal structure of (TPP)Fe-Bu has been determined. The structure of the n-butyliron(Ⅲ) porphyrin reveals the compound containing five-coordinated iron with the average Fe-N distance of 1.973(1) Å and Fe-C of 2.030(2) Å. The iron atom is displaced by 0.137Å from a four nitrogen mean plane. Crystal system is triclinic, and space group is P-1.

GMAW오버레이의 Fe-Al 금속간화합물의 형성 (Formation of Fe-Al Intermetallic Compound in GMAW Overlay)

  • 김병수;박경채;조상흠
    • 대한용접접합학회:학술대회논문집
    • /
    • 대한용접접합학회 2003년도 추계학술발표대회 개요집
    • /
    • pp.240-241
    • /
    • 2003
  • The iron aluminides have been among the most widely studied intermetallics because of their low cost, low density, good wear resistance, ease of fabrication and resistance to oxidation and corrosion. In this study, weld overlay was performed with JIS-YGW11 and A14043 wire on the base metal.

  • PDF