• 한국환경보건학회지
• /
• 제27권1호
• /
• pp.63-68
• /
• 2001

A laboratory experiment was performed to invstigate the nitrate removal using FeCl$_3$ -treated activated carbon. Iron chloride(III) was coated onto the surface of activated carbon. The removal efficiency of nitrate was increased with increasing of FeCl$_3$ was used for coating material. About 22~26mg of Fe per unit g of activated carbon was adsorbed. The nitrate removal was not affected by the pH under the experiment range of pH, but the pH value in solution decrease to 3.5~4.0 after reaction. The removal efficiency of nitrate was increased with increasing of dosage of adsorbents. Ammonia was not detected and the Fe concentration as low as 0.22mg/$\ell$ was desorbed from the adsorbents. The adsorbents was regenerated using KCl solution, and recovery was 76.6% at 1 M of KCl. The adsorption of nitrate by FeCl$_3$-treated activated carbon followed the Freundlich isotherm equation and the Freundlich constant, 1/n, was 0.346. These results showed that the FeCl$_3$-treated activated carbon could serve as the basis of a useful nitrate removal.

• 청정기술
• /
• 제13권4호
• /
• pp.274-280
• /
• 2007

본 연구에서는 염화 제2철 수용액의 재생 공정에 주로 쓰이고 있는 철환원법을 대체하기 위한 방법으로, 액-액 용매 추출법을 사용하여 수용액 내에 잔존해 있는 중금속인 Fe와 Ni을 분리 회수하는 공정을 개발하였다. Lab 실험을 통해 우선 염화 제2철 수용액으로부터 선택적으로 염화 제2철만을 추출할 수 있는 용매조건을 개발하였고, 그 결과를 사용하여 액-액 추출공정의 상업화 추진을 위한 pilot 공정 및 장치를 개발하였다. 또한 pilot test를 통하여 추출단과 역추출단의 단수를 결정할 수 있었고, 양산 공정에 적용할 수 있는 공정 데이터를 확보하였다.

• 한국표면공학회지
• /
• 제36권6호
• /
• pp.455-460
• /
• 2003

Microstructural and magnetic properties of nanocrystalline Fe-46 wt%Ni and Fe-36 wt%Ni alloys were investigated. Alloys were prepared by the electrodeposition process. The electrolytes were iron sulfate/nickel chloride-based and iron chloride/nickel sulfamate-based solutions. Fe-46 wt%Ni alloy was FCC structure with grain size of 10 nm, but FCC and BCC phases were found in Fe-36 wt%Ni alloy and its grain size was smaller. Effective permeability of Fe-36 wt%Ni alloy was higher than that of Fe-46 wt%Ni alloy in the high frequency range because of large electrical resistivity and small eddy current loss resulted from grain size decrease. Up to $300^{\circ}C$ of annealing temperature, grain growth of Fe-Ni alloys slowly occured. Conversely, annealing above $450^{\circ}C$ led to a drastic grain growth. In that case, effective permeability was decreased at the temperature lower than $300^{\circ}C$ but at $300^{\circ}C$ or higher effective permeability was increased. At the high frequency of 1 MHz, electrodeposited Fe-Ni alloys had higher effective permeability with an decrease in the grain size.

• Journal of Electrochemical Science and Technology
• /
• 제12권4호
• /
• pp.398-405
• /
• 2021

To fabricate a full-scale pilot model of the cost-effective Na-(Ni,Fe)Cl₂ cell, a Na-beta-alumina solid electrolyte (BASE) was developed by applying a one-step synthesis cum sintering process as an alternative to the conventional solid-state reaction process. Also, Fe metal powder, which is cheaper than Ni, was mixed with Ni metal powder, and was used for cathode material to reduce the cost of raw material. As a result, we then developed a prototype Na-(Ni,Fe)Cl₂ cell. Consequently, the Ni content in the Na-(Ni,Fe)Cl₂ cell is decreased to approximately (20 to 50) wt.%. The #1 prototype cell (dimensions: 34 mm × 34 mm × 235 mm) showed a cell capacity of 15.9 Ah, and 160.3 mAh g^-1 (per the Ni-Fe composite), while the #2 prototype cell (dimensions: 50 mm × 50 mm × 335 mm) showed a cell capacity of 49.4 Ah, and 153.2 mAh g^-1 at the 2^nd cycle.

• 식물병연구
• /
• 제29권1호
• /
• pp.82-87
• /
• 2023

Exogenous ferrous chloride (FeCl₂) suppressed in vitro growth of Ralstonia pseudosolanacearum, causing bacteria for tomato bacterial wilt. More than 50 μM of FeCl₂ reduced the in vitro bacterial growth in dosedependent manners. Two to 200 μM of FeCl₂ did not affect the fresh weight of detached tomato leaves at 3 and 5 days after the petiole dipping without the bacterial inoculation. The bacterial wilt of the detached tomato leaves was evaluated by inoculating two different inoculum densities of R. pseudosolanacearum (10⁵ and 10⁷ cfu/ml) in the presence of FeCl₂. Bacterial wilt in the detached leaves by 10⁵ cfu/ml was efficiently attenuated by 10-200 μM of FeCl₂ at 3 and 5 days post-inoculation (dpi), but bacterial wilt by 10⁷ cfu/ml was only reduced by 200 μM of FeCl₂ at 3 and 5 dpi. These results suggest that iron nutrients can be included in the integrated disease management of tomato bacterial wilt.

• 청정기술
• /
• 제25권1호
• /
• pp.14-18
• /
• 2019

여러 금속 부품을 가공하기 위하여 사용된 염화제이철 에칭 폐액은 유가금속인 니켈 등을 함유하고 있다. 본 연구에서는 식각공정을 완료한 에칭폐액을 재생하고 부산물로 나온 니켈 함유 폐액으로부터 정제하여 니켈 금속분말로 제조하는 공정을 개발하였다. 부산물인 니켈함유용액을 철 등의 불순물을 침전 제거하기 위하여 수산화나트륨 수용액을 실험을 통하여 가수분해 중화제로서 선정하였고, 이를 통하여 철 등의 불순물을 pH = 4 조건하에 침전 제거하였다. 그 후, 불순물로 잔류하는 망간 및 아연과 같은 금속이온들을 D2EHPA (Di-(2-ethylhexyl) phosphoric acid)를 사용하여 용매추출 하였다. 정제된 염화니켈은 99% 이상의 순도를 가지고 있으며, 그 후 환원제로 하이드라진을 이용하여 99% 이상의 순도와 약 150 nm의 크기를 가지는 니켈 금속분말로 제조하였다. 염화니켈 및 니켈 금속분말의 성분은 EDTA 적정법과 유도결합 플라즈마 방출분광법(inductively coupled plasma optical emission spectrometer, ICP-OES)을 이용하여 확인하였으며, 전계방사 주사전자현미경(field emission scanning electron microscope, FE-SEM), X-선 회절분석기(X-ray diffraction, XRD) 및 투과전자현미경(transmission electron microscopy, TEM)을 통하여 금속분말의 형태, 입자 크기 및 결정성과 같은 물리적 특성을 확인하였다.

• 대한약침학회지
• /
• 제14권2호
• /
• pp.5-14
• /
• 2011

Objectives: Fibrinolytic enzyme preparations were isolated from the snake venom of Macrovipera lebetica turanica in this study. Methods: The purity of the preparations was determined using SDS-PAGE and the enzymic characteristics of the purified fibrinolytic enzyme were determined. Results: 1. All of the two preparations with fibrinolytic activity obtained from the snake venom of M. l. turanicat contained the major polypeptide with the molecular weight of 27,500. One of the preparation showed purified fibrinolytic enzyme. 2. The purified fibrinolytic enzyme hydrolyzed ${\alpha}$-chain of fibrinogen faster than ${\beta}$-chain but not ${\gamma}$-chain. 3. The fibrinolytic activity was inhibited completely by EDTA, EGTA, 1,10-phenanthroline, and dithiothreitol. 4. The fibrinolytic activity was inhibited completely by calcium chloride, iron(III) chloride, mercuric chloride, and cobalt (II) chloride. 5. The fibrinolysis zone formed after addition of zinc sulfate was smaller but clearer than the control. Conclusions: These results suggested that the fibrinolytic enzyme purifed from the snake venom of M. l turanica was a metalloprotease containing dithiol group.

• Environmental Engineering Research
• /
• 제11권5호
• /
• pp.266-276
• /
• 2006

Commonly, the flocculant is dissolved in process or recycle water in industrial plant which has many ionic materials. Therefore, the polymer degradation in aqueous solution by chemical, mechanical or bacteriological may occur, sometimes rapidly. Even if the same flocculant is dissolved, the flocculation characteristics and the properties of dissolving polymer varied with the kind of dissolving water. In this study, we try to estimate the interaction between flocculants and ionic materials in dissolving water using self inversing emulsion polymer; polyacrylamide-co-trimethyl ammonium ethyl acrylate chloride flocculants which have varying molecular weights and structures at a several conditions. The polymeric flocculant is dissolved in artificial dissolving water with Potassium Chloride (PC), Calcium Chloride anhydrous (CC), Potassium Hydroxide (PH), Sodium Chloride (SC), Sodium Bromate (SB) and Iron (II) Sulfate Heptahydrate (IS) as ionic sources. Experimental results indicate that the cationic and anionic ions in dissolving water induce the hydrolysis, degradation of cationic functional group and uncoiling of polymeric flocculants, therefore, the flocculation efficiency decreased by undesired polymer. According that result, it is important to estimate not only its structures and physical properties but also the qualities of dissolving water to optimize the efficiency.

• 펄프종이기술
• /
• 제43권3호
• /
• pp.88-97
• /
• 2011

We carried out cationization of Dak pulp (paper mulberry bast fiber pulp) which is raw material of Hanji (Traditional Korean Paper) using a (3-chloro-2-hydroxypropyl) trimethyl ammonium chloride to improve dyeability during a dyeing of Hanji with Gardenia (Gardenia jasminoides) and smoke tree (Cotinus coggygria). Fiber specific charge densities were determined using polyelectrolyte titration method and K/S values of dyed Hanji was calculated by Kubelka-Munk equation. As the result, fiber specific charge density increased with degree of cationization. Colors of Hanji dyed with Gardenia did not vary significantly with degree of cationization, but cationized Hanji dyed with smoke tree showed a large increase of a* value and reddish yellow color. After-mordanting did not decrease K/S value of dyes with cationized Hanji. K/S values of dyed Hanji decreased with increasing dyeing temperature. For smoke tree, the cationization impair lightfastness of dyed Hanji without mordant. After-mordanting with copper acetate or iron chloride improved lightfastness of dyed Hanji.

• Corrosion Science and Technology
• /
• 제2권6호
• /
• pp.260-265
• /
• 2003

The experimental methods to rapidly and stably reproduce Microbially Influenced Corrosion (MIC) of stainless steel by sulfate-reducing bacteria such as Desulfovibrio vulgaris were developed. In this study, using two types of stainless steel, 304 and 444, obtained from Pohang Steel & Iron Co., Ltd. (POSCO)., three major factors were tested; overall medium composition, dilution ratio, and chloride concentration. In the overall medium tests, three different media were prepared according to $FeSO_4$ concentration; PM (original Postgate's medium No. 2), MPM 1 (modified PM, no $FeSO_4$, MPM 2 (modified PM, 1/10 $FeSO_4$). The effects of various dilution ratios (3, 1, 1/3, 1/10, 1/30, and 1/100 times) and chloride concentrations (0.0067M, 0.01M, 0.05M, and 0.1M) were examined during 2 months cultivation. Through SEM (Scanning Electron Microscopy) observation, the diluted and modified media, particularly the $1/3{\times}MPM$ I medium, showed more micro-pitting points on surfaces compared to the original PM medium. High concentrations of chloride ions (above 0.05M) were not adequate for observation of MIC since those brought about non-microbiologically induced corrosion. From this study, the optimization of medium composition was very effective to routinely observe MIC in a laboratory system.