• Journal of the Korean Chemical Society
• /
• v.17 no.5
• /
• pp.346-352
• /
• 1973

The quantitative separations of a mixture containing equal amounts of each cation such as Mn(Ⅱ), Cr(Ⅲ), V(Ⅴ), Cu(Ⅱ), Ni(Ⅱ), Co(Ⅱ), and Fe(Ⅲ) are carried out by the elution through $35cm{\times}3.14cm^2$ column of cation exchange resin, $Dowex 50w{\times}12$. The eluents are a mixture of 0.6 M sodium chloride and 0.1 M sodium tartrate (pH = 2.00 and 4.50) for Fe(Ⅲ), V(Ⅴ), Cu(Ⅱ), Ni(Ⅱ) and Co(Ⅱ), and a mixture of 3 M sodium chloride and 0.1 M sodium tartrate (pH = 4.50) or a mixture of 0.7 M sodium chloride and 0.5 M sodium oxalate (pH = 4.50 and 5.00) for Mn(Ⅱ) and Cr(Ⅲ). The subsidiary cations in a standard iron mixture such as V(Ⅴ), Cu(Ⅱ), Ni(Ⅱ), Mn(Ⅱ) and Cr(Ⅲ) are separated together from the large amount of Fe(Ⅲ) through $15cm{\times}3.14cm^2$ column of the resin, $Dowex 1{\times}8$, by elution with the eluent of 4.0 M hydrochloric acid. A small amount of Fe(Ⅲ), however, is eluted together with Cu(Ⅱ). V(Ⅴ), Ni(Ⅱ), Mn(Ⅱ) and Cr(Ⅲ) eluted together are separated quantitatively through $10cm{\times}3.14cm^2$ column of the resin,$Dowex 50w{\times}12$. Cu (Ⅱ) and a small amount of Fe(Ⅲ) are separated quantitatively through $10cm{\times}3.14cm^2$ column of the resin, $Dowex 50w{\times}12$, by the elution with a mixture of 0.6 M sodium chloride and 0.1 M sodium tartrate (pH = 2.00 and 4.50) as an eluent. By the conditions obtained in the separations of the standard iron mixture, Fe(Ⅲ) and all of the subsidiary cations in steel are quantitatively separated.

• Journal of Korean Society of Forest Science
• /
• v.3 no.1
• /
• pp.18-22
• /
• 1963

1. Objects The experiments of catalytic aharcoaling were carried out for the fallowing purposes. (1) To determine the economically desirable amount of catalytic materials to be used when a catalytic charcoaling is practiced. (2) To observe the rate of carbonization of non-treated charcoal wood when the catalytic charcoaling is proceeded in the same charcoal pit. 2. Meterials (1) Small sample chips made of oak (Q. accutissima Carr.), measured by 0.5cm in width and thickness, respectively, and 1cm in length, were used as charcoal wood in each experiment. (2) Ammonium chloride was used as a catalytic material and electric kiln as a charcoaling apparatus. 3. Experiment (1) The sample chips were put into a electric oven for three hours at the temperature $60^{\circ}{\sim}70^{\circ}C$ in order to reduce some water contents. (2) Oven dried sample chips were then soaked for an hour in solution of ammonium chloride. Three kinds of solution were prepared, that is, 2.5%, 5%, and 10%, solution in which the amount of ammonium chloride used was weighed at the rate of 0.5%, 1.0%, and 2.0% to the total weight of the sample chips, resppectivelly. (3) Soaked sample chips were put in the air for 12 hours to reduce some water contents, and then were put into electric oven for 2 hours at the temperature $105^{\circ}{\sim}110^{\circ}C$. (4) Dried sample chips were kept in a desiccator with control sample chips which were treated excarly the same process as the treated sample chips except only not using the ammonium chloride in the process of soking. (5) Sample chips kept in the desiccator were used at random in each charcoaling experiment. (6) Charcoaling in the electric kiln were carried out by using small crucibles with complete cover to reduce the amount of ash. At each charcoaling experiment four crucibles filled with sample ships, weighed about 20gr, were put into electric kiln. The charcoaling was continued for an hour at the temperature $400^{\circ}{\sim}450^{\circ}C$. (7) In order to investigate the influence given by the gases produced during the catalytic charcoaling to the rate of carbonization of non-treated sample chips, the following experiment was done. (a) A crueible was divided into two parts by inserting a fine iron net at the middle of the crucible, and then non-treated sample chips, weighed about 10gr, were put in the upper part of the crucible and treated sample chips, weighed also about 10gr, were put in the under part. (b) The crucibles filled with two kinds of sample chips were put into a electric kiln for an hour at the temperature $400^{\circ}{\sim}450^{\circ}C$. 4. Results. Results for two replications (with four crucibles in one replication) for each experiment designed are as follows : (1) The rats of carbonization of the non treated sample chips, and that of the treated sample chips with ammonium chloride at the rate of 1.5%, 1.0%, and 2.0% to the total weight of the sample chips used were averaged at 19.85%, 22.63%, 24.14%, and 26.60%, respectively. (2) The rats of carbonization of the non-treated sample chips were averaged at (a) 20.04% (0.5% treatment), (b) 20.28% (1.0% treatment), and (c) 20.61% (2.0% treatment) when the treated sample chips were carbonized in the same crucible.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.30 no.1
• /
• pp.44-49
• /
• 2018

High-strength plastic water supply pipe evaluation method was evaluated in this study. Up to date, high strength water supply pipes that we install are mostly ductile cast iron pipes. Sometimes, a few PVC pipes are installed. Metal pipes have rust problem on the surface, causing serious damage to metal pipes and reducing the expected life span of water piping system. Nowadays, depending on technology development, some companies have improved properties of general PVC pipe performance with remarkable properties that exceed KS and ASTM standard. Here, we suggest a new method of performance evaluation for high-strength water plastic pipes.

• Textile Coloration and Finishing
• /
• v.6 no.2
• /
• pp.40-46
• /
• 1994

In order to study the properties of cochineal color, variation of uv, visible spectra by pH, dyeing properties on the silk in several dyeing conditions and thermodynamic parameter were investigated. Cochineal colors had an unusual to pH, especially had instability in alkali condition. An increase in the dyeing temperature and in time resulted in an increase in the dye content of silk fibers. Concentration of cochineal color in the silk fiber was related to pH and the maximum exhaustion of cochineal colors showed at about pH 3. The value of apparent diffusion coefficients and standard affinities of dyeing increased with the increase of dyeing temperature. The standard heats of dyeing(ΔH°), variation of entropy(ΔS°) and activation energy(E/sub act/) were caculated to be -1.72kcal/mo1, -3.77cal/mo1ㆍdeg and 1.26kcal/mo1, respectively. Silk fabrics were dyed bright red by tin chloride, reddish purple by copper sulfate, and bluish gray by iron sulfate, respectively. Lightfastness of silk fabrics mordanted by metal ion was weak.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.6
• /
• pp.295-298
• /
• 2013

Nano-size manganese ferrite reinforced conductive polypyrrole composites reveal a core-shell structure by in situ polymerization, in the presence of dodecyl benzene sulfonic acid as the surfactant and dopant, and iron chloride as the oxidant. The structure and magnetic properties of manganese ferrite nano-fillers were measured, by using X-ray diffraction and vibrating sample magnetometer. The morphology, microstructure, and conductivity of the composite were characterized by transmission electron microscopy, Fourier transform infrared spectroscopy, and four-wire technique. The microwave-absorbing properties of composites reinforcement dispersed in resin coating with the coating thickness of 1.2 nm were investigated, by using vector network analyzers, in the frequency range of 8~12 GHz. A reflection loss of -8 dB was observed at 10.5 GHz.

• Textile Coloration and Finishing
• /
• v.12 no.2
• /
• pp.129-137
• /
• 2000

Silk fabrics were dyed by Cochineal extracts after mordanted with various mordants and their properties of dyeing, fastness and change of surface color were investigated. Silk fabrics were mordanted with aluminum potassium sulfate, copper acetate, tin chloride, iron sulfate or chromium potassium sulfate at $60^\circ{C}$ for 30 minutes and subsequently dyed at $60^\circ{C}$ for 60 minutes unless mentioned otherwise. The dye-uptake of silk fabrics increased with the concentration of Cochineal extracts and mordants used. Maximum dye-uptake was obtained at pH 3.5-4, regardless of the type of mordants used. Surface color of silk fabrics changed from red purple to purple when mordanted with Al or Cu mordant, from purple to purple blue with Fe mordant and showed red purple with Sn or Cr mordant, respectively. It also changed according to pH of dyeing bath. Dyed silk fabrics showed poor light fastness but good dry-cleaning, perspiration and rubbing fastness.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.5
• /
• pp.503-513
• /
• 2003

A single particle analytical technique, called low-Z electron probe X-ray microanalysis (low-Z EPMA) was applied to characterize atmospheric particles collected in Busan, Korea, over a daytime period in Dec. 2001. The ability to quantitatively analyze the low-Z elements, such as C, N, and 0, in microscopic volume enables the low-Z EPMA to specify the chemical composition of individual atmospheric particle. Various types of atmospheric particles such as organics, carbon-rich, aluminosilicates, silicon oxide, calcium carbonate, iron oxide, sodium chloride, sodium nitrate, ammonium sulfate, and titanium oxide were identified. In the sample collected in Busan, sodium nitrate particles produced as a result of the reaction between sea salt and nitrogen oxides in the atmosphere were most abundantly encountered both in the coarse and fine fractions. On the contrary, original sea salt particles were rarely observed. The fact that most of the carbonaceous particles were distributed in the fine fraction implies that their origin is anthropogenic.

• Journal of Conservation Science
• /
• v.5 no.2 s.6
• /
• pp.35-44
• /
• 1996

We propose a new method to remove salts that have permeated into excavated metal objects. This method cleans the excavated metal objects by using high temperature, high pressure deoxvgenated water containing inhibitors for corrosion of metals. The method greatly reduces the washing time compared with previous methods. Waste water from the method does not need treatment, nor do chemicals need to be removed from the metal objects. Furthermore, this method is applicable to some kind of metals(for example iron objects, bronze objects). We measured quantitatively the soluble salts dissolved from actual metal objects and found that there was a large difference between soluble chloride ions and sulfate ions.

• Advances in Traditional Medicine
• /
• v.7 no.4
• /
• pp.441-443
• /
• 2007

A preliminary in vitro acid neutralizing capacity test of twelve traditional Ayurvedic antacids were performed in this study. Five traditional preparations of ash of conch shell, ash of oyster, ash of pearl, limestone, and ash of cowrie showed high acid neutralizing capacity similar to standard antacid combination of $Al(OH)_3\;and\;Mg(OH)_2$. Among these the ash of conch shell found the highest acid neutralizing capacity. The ash of tamarind and ash of Achyranthus aspera showed moderate acid neutralizing capacity. The acid neutralizing capacity of red ochre; ash of iron; mixture of niter, alum and ammonium chloride; saltpeter; and ash of mica found below the USP 23 limit.

• Journal of Magnetics
• /
• v.14 no.4
• /
• pp.165-167
• /
• 2009

Nano-sized Yttrium iron garnet (YIG;$Y_3Fe_5O_{12}$) particles have been synthesized by using coprecipitation and a heat treatment process. The YIG particles were made using a nitrate or a chloride salt solution. The pH concentration of the solution was fixed at 12. Spherical shaped YIG particles were made with a size of about 20 nm. The magnetization value of the particles was smaller than the bulk value but their coercive field showed a high value.