• Journal of Magnetics
• /
• 제11권3호
• /
• pp.123-125
• /
• 2006

Co-ferrite nanoparticles have been synthesized by the decomposition of iron(III) acetylacetonate, $Fe(acac)_3$ and Co acetylacetonate, $Co(acac)_2$ in benzyl/phenyl ether in the presence of oleic acid and oleyl amine at the refluxing temperature of $295^{\circ}C$/$265^{\circ}C$ for 30 min. before cooling to room temperature. Particle diameter detected by PSA can be turned from 4 nm to 20 nm by seed-mediated growth and reaction conditions. Structural and magnetic characterization of Co-ferrite were measured by use of HRTEM, SAED (selected area electron diffraction), XRD and SQUID. The as-synthesized Co-ferrite nanoparticles have a cubic spinel structure and coercivity of 20 nm $CoFe_{2}O_{4} nanoparticles reached 1 kOe at room temperature and 18 kOe at 10 K.

• 한국세라믹학회지
• /
• 제56권3호
• /
• pp.298-301
• /
• 2019

This paper details the synthesis of α-FeOOH (goethite) rods through the reaction of iron (III) nitrate with KOH as a strong base, and shape control of the particles for use as a yellow inorganic pigment. The crystal phase of the α-FeOOH crystal with OH content according to the addition of KOH and the change in morphology were investigated. The optical properties varied with the aspect ratios, and the yellowness increased with increasing aspect ratio. However, the enhanced chromaticity characteristics reversed beyond a certain critical aspect ratio. Thus, the relative optimal aspect ratio of the α-FeOOH rods as a vivid yellow inorganic pigment was derived. The morphology and coloration of the prepared rods were investigated in detail using X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-vis spectroscopy, and CIE Lab color parameter measurements.

• 한국전기전자재료학회논문지
• /
• 제17권6호
• /
• pp.652-660
• /
• 2004

The cis-hex-3-ene-1,5-diynyl-bridged diiron compound 3, [(η$^{5}$ - $C_{5}$ M $e_{5}$ ) Fe(dppe)］$_2$($\mu$-C≡C-CH=CH-C≡C), have been prepared and characterized by cyclic voltammetry(CV), and electronic spectroscopy (UV-VIS and near-IR, NMR). From the results, compound 3 show two well resolved, single-electron, reversible oxidation waves by CV, and comproportionation constant(Kc) calculated from the CV data for compound 3. The Mixed-valence (MV) radical cation 3$^{+}$ show strong absorptions in the near IR, 1586 nm, and this band is more readily assigned as MV $\pi$-$\pi$ band of delocalized complex (Robin-Day Mixed-valence Class III), and the $H_{ab}$ , effective coupling parameter are most consistent with electronic delocalization.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.287-298
• /
• 2001

Change in light transmission characteristics caused by various types of oil contaminations was experimentally measured with a built-in type wear monitoring device. Three kinds of iron powders of different size distribution, carbon dust, two kinds of solutions and grease were used for the lest contaminants in this work. Light intensity of the transmitted light was treasured with the contamination level. Results showed that the transmitted light intensity decreased linearly with the contamination concentration in the oil and the slope was affected by the size distribution. Light attenuation was also caused greatly by carbon dust, water contamination and polymeric fibers mainly due to the light absorption. As a result, it was proved that the optical measurement device could be applicable effectively for detecting any significant change iii lubricating oils.

• Bulletin of the Korean Chemical Society
• /
• 제14권4호
• /
• pp.444-449
• /
• 1993

Anaerobic oxidation of D-penicillamine by Fe(III) in acidic solution has been studied kinetically by the use of stopped-flow system. The reaction is biphasic with a rapid complexation of 1: 1 complex, $Fepen^+$ (pen= D-penicillamine dianion) which is then internally reduced to Fe(II) and disulfide. Rates of both the complexation and the redox process are pH dependent and also are affected by the presence of chloride ion. Different from the reaction of Cu(II) with D-penicillamine, partially oxidized mixed-valence complex is not formed even transiently in this reaction.

• Bulletin of the Korean Chemical Society
• /
• 제21권12호
• /
• pp.1233-1238
• /
• 2000

$Mo/{\gamma}-Al_2O_3catalysts$ modified with Fe, Co, and Ni were prepared by impregnation method and catalytic activity for water gas shift reaction was examined. The optimum amount of Mo loaded for the reaction was 10 wt% $MoO_3$ to ${\gamma}-Al_2O_3.$ The catalytic activity of $MoO_3/{\gamma}-Al_2O_3was$ increased by modifying with Fe, Co, and Ni in the order of Co${\thickapprox}$ Ni > Fe. The optimum amounts of Co and Ni added were 3 wt% based on CoO and NiO to 10 wt% $MoO_3/{\gamma}-Al_2O_3$, restectively. The TPR (temperature-programmed reduction) analysis revealed that the addition of Co and Ni enganced the reducibility of the catalysts. The results of both catalytic activity and TPR experiments strongly suggest that the redox property of the catalyst is an important factor in water gas shift reaction on the sulfided Mo catalysts, which could be an evidence of oxy-sulfide redox mechanism.

• 청정기술
• /
• 제25권1호
• /
• pp.14-18
• /
• 2019

여러 금속 부품을 가공하기 위하여 사용된 염화제이철 에칭 폐액은 유가금속인 니켈 등을 함유하고 있다. 본 연구에서는 식각공정을 완료한 에칭폐액을 재생하고 부산물로 나온 니켈 함유 폐액으로부터 정제하여 니켈 금속분말로 제조하는 공정을 개발하였다. 부산물인 니켈함유용액을 철 등의 불순물을 침전 제거하기 위하여 수산화나트륨 수용액을 실험을 통하여 가수분해 중화제로서 선정하였고, 이를 통하여 철 등의 불순물을 pH = 4 조건하에 침전 제거하였다. 그 후, 불순물로 잔류하는 망간 및 아연과 같은 금속이온들을 D2EHPA (Di-(2-ethylhexyl) phosphoric acid)를 사용하여 용매추출 하였다. 정제된 염화니켈은 99% 이상의 순도를 가지고 있으며, 그 후 환원제로 하이드라진을 이용하여 99% 이상의 순도와 약 150 nm의 크기를 가지는 니켈 금속분말로 제조하였다. 염화니켈 및 니켈 금속분말의 성분은 EDTA 적정법과 유도결합 플라즈마 방출분광법(inductively coupled plasma optical emission spectrometer, ICP-OES)을 이용하여 확인하였으며, 전계방사 주사전자현미경(field emission scanning electron microscope, FE-SEM), X-선 회절분석기(X-ray diffraction, XRD) 및 투과전자현미경(transmission electron microscopy, TEM)을 통하여 금속분말의 형태, 입자 크기 및 결정성과 같은 물리적 특성을 확인하였다.

• 대한토목학회논문집
• /
• 제31권4B호
• /
• pp.377-382
• /
• 2011

본 연구에서는 modified fenton 반응에서 과산화수소를 안정화하여 오염토양 정화의 효과를 증대시키고자 하였다. 오염토양을 모사하기 위하여 PAHs 계열의 대표적인 오염물질인 phenanthrene을 사용하였다. 과수안정제로는 음이온 계면활성제인 SDS(Sodium dodecyl Sulfate)를 사용하였다. Modified Fenton 반응에서 phenanthrene의 제거율을 확인하기 위하여 Fe(II) 4 mM, SDS 5~50 mM 및 $H_2O_2$ 102.897 mM를 phenanthrene 125 mg/kg으로 오염된 토양에 주입하였다. 과수안정제인 SDS가 30 mM이 사용된 경우 phenanthrene의 제거 효율이 95%로 가장 높게 나타났으며 30 mM이싱에서는 시스템에서 SDS가 scavenger로 작용하여 오염물질의 제거효율이 SDS 30 mM 일 때 보다 낮게 나타났다. 과수안정제를 사용한 뒤 과산화수소의 농도변화를 분석한 결과 Fe(II) 2 mM에서 48시간 이후 14.6995 mM 이상 남아있어서 가장 안정적이었지만, Fe(III)을 주입한 경우에는 과산화수소가 안정화되지 않았다. Modified Fenton 반응에서 철과 SDS 농도 사이의 최적의 비율을 찾기 위하여 SDS의 농도는 30 mM로 고정하고 철의 농도를 2~8 mM로 변화시켜 실험한 결과 Fe(II) 4 mM 및 SDS 30 mM에서 약 95%의 가장 높은 제거율을 보였다.

• 한국환경농학회지
• /
• 제24권3호
• /
• pp.203-209
• /
• 2005

실험에 사용된 영가 철의 평균 입도는 $85.55{\sim}196.46{\mu}m$의 범위를 나타내었고 비표면적은 $0.055{\sim}0.091m^2/g$으로 나타났다. 영가 철 중 J(93%) 및 PU(88%)를 제외한 PA, F, S, J1는 철을 98% 이상 함유하는 것으로 평가되었다. 영가 철에 의한 Cr(VI)의 환원은 영가 철의 종류에 따라 달랐으며, J 및 PU의 경우 3시간 이내에 98% 이상의 Cr(VI)을 제거하였다. 그러나 PA, F, S, J1의 경우 반응 48시간 동안 각각 74, 65, 29, 11%의 Cr(VI) 만을 제거하였으며 이때 환원 효율은 J > PU > PA > F > S > J1 순으로 나타났다. 영가철에 의한Cr(VI)의 환원 과정에서 용액의 pH는 반응초기 3시간 동안 급격히 증가하였으며 이후 안정화되는 경향을 나타내었다. 영가 철의 종류에 따른 pH의 변화는 PU > J > PA > F > S > J1 순으로 나타났으며 Cr(VI)의 환원효율이 큰 영가 철에서 pH의 상승 폭도 크게 나타나는 것으로 평가되었다. 영가 철의 종류에 따른 산화환원전위 Eh의 변화는 pH와는 반대의 경향을 나타내었으며 Cr(VI)의 환원율이 클수록 Eh의 감소율은 증가하였다. 유기화합물의 경우 반응효율이 영가 철의 물리적 특성에 의해 주로 지배되는 것으로 알려져 있으나 Cr(VI)의 경우 화학적 특성이 반응효율을 지배하는 것으로 판단되었다. 본 실험에 사용된 6종류의 상용 영가 철 중에는 J와 PU가 Cr(VI)의 환원에 가장 효과적인 것으로 조사되었다.

• Bulletin of the Korean Chemical Society
• /
• 제14권4호
• /
• pp.439-444
• /
• 1993

The aerobic oxidation of the Fe(II) complex of 1,4,8,11-tetraazacyclotetradecane, [Fe(cyclam)$(CH_3CN)_2](ClO_4)_2$, in MeCN in the presence of a few drops of $HClO_4$ leads to low spin Fe(III) species [Fe(cyclam)$(CH_3CN)_2](ClO_4)_3$. The Fe(III) cyclam complex is further oxidized in the air in the presence of a trace of water to produce the deep green binuclear bismacrocyclic Fe(II) complex $[Fe_2(C_{20}H_{36}N_8)(CH_3CN)_4](ClO_4)_4{\cdot}2CH_3CN$. The Fe(II) ions of the complex are six-coordinated and the bismacrocyclic ligand is extensively unsaturated. $[Fe_2(C_{20}H_{36}N_8)(CH_3CN)_4](ClO_4)_4{\cdot}2CH_3CN$ crystallizes in the monoclinic space group $P2_1/n$ with a= 13.099 (1) ${\AA}$, b= 10.930 (1) ${\AA}$, c= 17.859 (1) ${\AA}$, ${\beta}$= 95.315 $(7)^{\circ}$, and Z= 2. The structure was solved by heavy atom methods and refined anisotropically to R values of R= 0.0633 and $R_w$= 0.0702 for 1819 observed reflections with F > $4{\sigma}$ (F) measured with Mo K${\alpha}$ radiation on a CAD-4 diffractometer. The two macrocyclic units are coupled through the bridgehead carbons of ${\beta}$-diimitie moieties by a double bond. The double bonds in each macrocycle unit are localized. The average bond distances of $Fe(II)-N_{imine}$, $Fe(II)-N_{amine}$, and $Fe(II)-N_{MeCN}$ are 1.890 (5), 2.001 (5), and 1.925 (6) ${\AA}$, respectively. The complex is diamagnetic, containing two low spin Fe(II) ions in the molecule. The complex shows extremely intense charge transfer band in the near infrared at 868 nm with ${\varepsilon}$= 25,000 $M^{-1}cm^{-1}$. The complex shows a one-electron oxidation wave at +0.83 volts and two one-electron reduction waves at -0.43 and-0.72 volts vs. Ag/AgCl reference electrode. The complex reacts with carbon monoxide in $MeNO_2$ to form carbonyl adducts, whose $v_{CO}$ value (2010 $cm^{-1}$) indicates the ${\pi}$-accepting property of the present bismacrocyclic ligand.