• 산업기술연구
• /
• 제33권A호
• /
• pp.89-92
• /
• 2013

The characteristics of floc formation of the iron(Fe) ions was studied for developing the process treating the acid mine drainage. The metal ions in aqueous solution oxidized with oxygen in air, which generated hydrogen ion and lowered the pH of the aqueous solution. The iron(Fe) ions were formed into flocs by the acid-base reaction with the added $Ca(OH)_2$ for the neutralizing the solution. There were several variables affecting the formation, size and color of floc; whether air was present or not, air feeding rate, oxidizing time, concentration of $Ca(OH)_2$, the acid-base reaction time of the $iron(Fe)-Ca(OH)_2$. For proper formation of the $iron(Fe)-Ca(OH)_2$ flocs and developing the floc treating system, the control variables mentioned above should be considered.

• 대한환경공학회지
• /
• 제27권6호
• /
• pp.657-662
• /
• 2005

황화철은 자연 퇴적토와 공극수에서 생물학적 과정이나 무생물학적 과정에 의해서 상당량 생성된다. 본 연구에서는 6가 크롬과 황화철로부터 용해되어 나온 이가 철과 6가 크롬의 반응에 관하여 알아보기 위해 6가 크롬의 초기농도를 다르게 하여 pH 4와 8에서 수용액상과 고체상으로 나누어 실험을 수행하였다. 또한 철산화물인 ${\alpha}-Fe_2O_3$, ${\alpha}-FeOOH$, $Fe_3O_4$와 0가 철을 이용하여 황화철에 의한 6가 크롬의 제거효율을 비교하였다. 6가 크롬의 제거율은 pH 4일 때가 pH 8일 때 높았으며 이는 낮은 pH에서 황화철로부터 용해되어 나온 이가 철의 양의 pH 4에서 더 많기 때문인 것으로 판단된다. 투과전자 현미경(Transmission Electric Microscopy)을 이용한 황화철의 표면 분석을 통하여 고체 표면에 형성된 침전물을 확인하였다. 이는 황화철에 의한 6가 크롬의 환원 작용에 의하여 iron(oxyhyoxide) 침전이 형성된 것으로 판단된다. 황화철은 철 산화물 및 영가 철에 비하여 그 제거능이 월등하며 이는 이가 철과 함께 황화물의 상호작용인 것으로 사료된다.

• Journal of Pharmaceutical Investigation
• /
• 제24권3호spc1호
• /
• pp.11-18
• /
• 1994

We have studied the iron uptake by the purified brush-border membrane vesicles (BBMVs) to determine the effect of fructose on the absorption of iron. BBMVs were prepared by the modified calcium precipitation method, The degree of purification was routinely assessed by the marker enzyme, alkaline phosphatase, and the functional integrity was tested by $D-[1-^3H]glucose$ uptake. The appearance of membrane vesicles was shown by transmission electron microscopy (TEM). The uptakes of complexes of labeled iron $[^{59}Fe]$ with fructose and ascorbate were measured with a rapid filtration technique, The uptake rate and pattern of the two iron-complexes, Fe(III)-fructose and Fe(III)-ascorbate, were also observed. A typical overshooting uptake of D-glucose was observed with peak value of $2{\sim}3$ times higher concentration than that at equilibrium. This result was similar to other studies with BBMVs. TEM showed that the size of BBMVs was uniform and we can hardly find any contaminants, Fe(III)-fructose has the higher value of $V_{max}$ and the lower value of Km than those of Fe(III)-ascorbate, respectively. It may be concluded that D-fructose is more effective in promoting the iron absorption than ascorbate.

• 한국재료학회지
• /
• 제21권1호
• /
• pp.28-33
• /
• 2011

This paper describes the fabrication of AlN thin films containing iron and iron nitride particles, and the magnetic and electrical properties of such films. Fe-N-Al alloy films were deposited in Ar and $N_2$ mixtures at ambient temperature using Fe/Al composite targets in a two-facing-target DC sputtering system. X-ray diffraction results showed that the Fe-N-Al films were amorphous, and after annealing for 5 h both AlN and bcc-Fe/bct-$FeN_x$ phases appeared. Structure changes in the $FeN_x$ phases were explained in terms of occupied nitrogen atoms. Electron diffraction and transmission electron microscopy observations revealed that iron and iron nitride particles were randomly dispersed in annealed AlN films. The grain size of magnetic particles ranged from 5 to 20 nm in diameter depending on annealing conditions. The saturation magnetization as a function of the annealing time for the $Fe_{55}N_{20}Al_{25}$ films when annealed at 573, 773 and 873 K. At these temperatures, the amount of iron/iron nitride particles increased with increasing annealing time. An increase in the saturation magnetization is explained qualitatively in terms of the amount of such magnetic particles in the film. The resistivity increased monotonously with decreasing Fe content, being consistent with randomly dispersed iron/iron nitride particles in the AlN film. The coercive force was evaluated to be larger than $6.4{\times}10^3Am^{-1}$ (80 Oe). This large value is ascribed to a residual stress restrained in the ferromagnetic particles, which is considered to be related to the present preparation process.

• 전기화학회지
• /
• 제2권3호
• /
• pp.156-162
• /
• 1999

본 연구에서는 리튬전지 내 양극 재료로서 리튬-철계 산화물의 응용가능성을 모색하기 위하여 여러 제조방법에 따라 변화되는 전기화학적 특성을 고찰하고자 하였다. 철산화물에 대한 기본적인 양극 전기화학적 특성을 관찰하기 위해 철판, 철분말을 산화시켜 제작한 전극과 FeOOH 분말로 제작한 전극을 전류전위 순환실험을 실행하였다. 그 결과 철판과 FeOOH분말 전극의 경우 거의 리튬 층간의 산화-환원 반응이 일어나지 않음을 알 수 있었으며 철 분말의 산화물 전극에서는 리튬이온의 환원반응 피크는 보이나 산화반응은 거의 관찰되지 않았다. 또한 출발 물질 $FeCl_3-6H_2O,\;NaOH.\;LiOH$를 혼합하여 저온으로 가열하여 층상의 $LiFeO_2$를 합성하였으며, 출발 물질의 조성비를 바꾸어 그 영향을 조사하였다. 그 결과 NaOH의 첨가량이 증가할수록 전극의 용량과 효율은 감소하나 용량의 감소율은 작아짐을 알 수 있었다. $NaOH/FeCl_3/LiOH$의 몰 비를 2/1/7로 조성하여 합성하였을 때 가장 큰 용량을 보였으나 효율은 30회 순환 후 급격히 감소하였다.

• 한국전기전자재료학회논문지
• /
• 제26권6호
• /
• pp.478-481
• /
• 2013

Diameter controlled carbon nanotubes (CNTs) were grown using surface modified iron nano-particle catalysts with aminpropyltriethoxysilane (APS). Iron nano-particles were synthesized by thermal decomposition of iron pentacarbonyl-oleic acid complex. Subsequently, APS modification was done using the iron nano-particles synthesized. Agglomeration of the iron nano-particles during the CNT growth process was effectively prevented by the surface modification of nano-particles with the APS. APS plays as a linker material between Fe nano-particles and $SiO_2$ substrate resulting in blocking the migration of nano-particles. APS also formed siliceous material covering the iron nano-particles that prevented the agglomeration of iron nano-particles at the early stages of the CNT growth. Therefore we could obtain the diameter controlled CNTs by blocking agglomeration of the iron nano-particles.

• 한국주조공학회지
• /
• 제41권1호
• /
• pp.3-10
• /
• 2021

알루미늄 합금과 주철의 복합주조 공정 중에는 주철로부터 철 성분이 용해되어 알루미늄 용탕에 혼입될 수 있으므로 다양한 Fe함유 금속간 화합물이 형성되며, 이로 인해 알루미늄 합금의 인장 특성이 크게 저하 될 수 있다. 반면 불순물로 첨가되는 Fe와 는 달리 Cu의 경우 알루미늄 합금의 기계적 물성을 향상시키기 위해 첨가되는 합금원소이다. 본 연구에서는 Fe와 Cu의 첨가로 인한 알루미늄 합금의 미세조직 및 인장특성의 변화를 조사하였다. 첨가된 Fe 함량이 1% 이상일 경우 조대한 Al₅FeSi 상과 같은 Fe 함유 화합물들이 다량 형성되어 인장 특성이 현저히 감소하는 것으로 나타났다. Cu가 첨가 된 알루미늄 합금의 경우 Al2Cu 상이 추가로 형성되었으며, 인장 강도가 뚜렷하게 향상되는 결과를 보였다.

• Preventive Nutrition and Food Science
• /
• 제3권3호
• /
• pp.248-250
• /
• 1998

In this study, transferrin which is an iron-carrying glycoprotein in plasma was evaluted for its iron binding capacities(TIBC), iron solubilizing abilities, and enhancing effect of biological availbability of iron. Results of TIBC showed that 1 mg of transferrin could blind 1.28$\mu\textrm{g}$ of iron indicating that one molecule of transferrin can bind about 2 molecules of iron. Also, solubility of iorn (7.5$\mu\textrm{g}$ Fe/ml) was significantly incresed to 96.0% with addition of transferrin (5mg/ml) .When FeCl3(80$\mu\textrm{g}$ Fe/ml) was injected to iron-deficient rats by intestinal segment in situ technique, 18.4% of injected iron was absorbed wherease 48.49 and 48.76% of injected iron was absorbed with addition of 10 and 20 mg transferrin/ml , respectively.

• Journal of Magnetics
• /
• 제16권3호
• /
• pp.318-321
• /
• 2011

A new Fe-based amorphous compound powder was prepared from Fe-Si-B amorphous powder by crushing amorphous ribbons as the first magnetic component and Fe-Cr-Mo metallic glassy powder by water atomization as the second magnetic component. Subsequently by adding organic and inorganic binders to the compound powder and cold pressing, the new Fe-based amorphous compound powder cores were fabricated. This new Fe-based amorphous compound powder cores combine the superior DC-Bias properties and the excellent core loss. The core loss of 500 kW/$m^3$ at $B_m$ = 0.1T and f = 100 kHz was obtained When the mass ratio of FeSiB/FeCrMo equals 3:2, and meanwhile the DC-bias properties of the new Fe-based amorphous compound powder cores just decreased by 10% compared with that of the FeSiB powder cores. In addition, with the increasing of the content of the FeCrMo metallic glassy powder, the core loss tends to decrease.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제19권1호
• /
• pp.63-69
• /
• 2014

This paper presents the feasibility of using different iron oxides (microscale hematite (HT), microscale magnetite (MT), and nanoscale maghemite (NMH)) in enhancing nitrate reduction by zero-valent iron (Fe(0)) under two solution conditions (artificial acidic water and real groundwater). Addition of MT and NMH into Fe(0) system resulted in enhancement of nitrate reduction compared to Fe(0) along reaction, especially in groundwater condition, while HT had little effect on nitrate reduction in both solutions. Field emission scanning electron microscopy (FESEM) analysis showed association of MT and NMH with Fe(0) surface, presumably due to magnetic attraction. The rate enhancement effect of the minerals is presumed to arise from its role as an electron mediator that facilitated electron transport from Fe(0) to nitrate. The greater enhancement of MT and NMH in groundwater was attributed to surface charge neutralization by calcium and magnesium ions in groundwater, which in turn facilitated adsorption of nitrate on Fe(0) surface.