• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.5
• /
• pp.486-492
• /
• 1999

The purpose of this research was to find out what is the dominant factor determining the $H_{ex}$ and the $H_C$ of Mn-Ir/Ni-Fe multilayers with different buffer layers. Regardless of (111) texture of Mn-Ir layer, all samples showed over the $H_{ex}$ of 155 Oe. We found out the $H_{ex}$ and the $H_C$ of Mn-Ir/Ni-Fe multilayers depend on interface morphology and grain size of Mn-Ir layer at the interface between Mn-Ir and Ni-Fe layers. The dependence of magnetroesistance ratio and coupling field on the thickness of ferromagnetic layer, thickness of Cu layer and different buffer layers have been studied. Maximum magnetoresistance ratio appeared for the sample Ta(5 nm)/Mn-Ir(10 nm)/Ni-Fe(7.5 nm)/Cu(2 nm)/Ni-Fe(6 nm)/Ta(5 nm)/Si. Magnetoresistance ratio may be related to grain of ferromagnetic layer. Coupling field may be related to the roughness and the grain size of ferromagnetic layer in the spin-valve multilayers.

• Journal of Sensor Science and Technology
• /
• v.33 no.5
• /
• pp.288-297
• /
• 2024

Currently, numerous studies are being conducted on metal oxide semiconductor (MOS) gas sensors for hydrogen detection, using Palladium (Pd) and Pd-based alloy nanoparticles (NPs) owing to their hydrogen absorption ability. Furthermore, several studies have reported that Pd-Iridium (Ir) alloys possess high hydrogen absorption capabilities in their bulk state. However, Ir growth is limited to above 2 nm and it does not mix extensively with other metals. Furthermore, as the hydrogen absorption capacity decreases with the reduction in particle size, it is necessary to synthesize nanoparticles of an appropriate size. Therefore, the synthesis of Pd-Ir alloy NPs larger than 10 nm is challenging. In this study, we report the synthesis of Pd-Ir NPs with an average diameter of 19 nm using a hydrothermal technique for the first time and fabricated Pd-Ir alloy NPs through calcination at 500℃ in Ar and air. To confirm alloy formation and oxidation behavior, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) were performed. In addition, we synthesized Pd-Ir@CeO₂ core-shell nanoparticles (CSNPs) as hydrogen gas-sensing materials. The Pd-Ir core was partially oxidized during heat treatment at 500℃ in air, and Pd-Ir@CeO₂ CSNPs were finally changed into Pd-Ir(alloy)/PdO-IrO₂@CeO₂ CSNPs, which exhibited higher sensitivity and selectivity toward H₂ gas compared to totally oxidized PdO-IrO₂@CeO₂ CSNPs and pure CeO₂ NPs. The enhanced gas-sensing performance was attributed to the hydrogen absorption effect of the Pd-Ir(alloy) NPs.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.1
• /
• pp.79-89
• /
• 2023

Development of efficient and stable electrocatalysts for oxygen evolution reaction (OER) under acidic conditions is desirable goal for commercializing proton exchange membrane (PEM) water electroyzer. Herein, we report iridium-doped hydrogenated titanate (Ir-HTO) nanobelts as a promising catalyst with a low-Ir content for the acidic OER. Addition of low-Ir (~ 3.36 at%) into the single-crystalline HTO nanobelts with large exposed {100} facets significantly boost catalytic activity and stability for OER under acidic conditions. The Ir-HTO outperforms the commenrcial benchmark IrO₂ catalyst; an overpotential for delivering 10 mA cm^-2 current density was reduced to about 25% for the Ir-HTO. Moreover, the catalytic performance of Ir-HTO is positioned as the most efficient electrocatalyst for the acidic OER. An improved intrinsic catalytic activity and stability are also confirmed for the Ir-HTO through in-depth electrochemical characterizations. Therefore, our results suggest that low-Ir doped single-crystalline HTO nanobelts can be a promising catalyst for efficient and durable OER under acidic conditions.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.05a
• /
• pp.92-92
• /
• 1998

• Journal of the Korean Chemical Society
• /
• v.27 no.5
• /
• pp.340-344
• /
• 1983

It has been found that both of the iridium (Ⅰ) complexes, Ir$(ClO_4$)(AN)(CO)$(Ph_3P)_2$(AN = $CH_2$CHCN, $Ph_3P = (C_6H_5)_3$P) and [Ir(AN)(CO)$(Ph_3P)_2]ClO_4$, react with $Cl^-$ to give IrCl(AN)(CO)$(Ph_3P)_2$, and [Ir(AN)(CO)$(Ph_3P)_2]ClO_4$ dissociates AN to yield Ir$(ClO_4)(CO)(Ph_3P)_2$ in the absence of excess AN added, and Ir$(ClO_4)(CO)(Ph_3P)_2$ reacts with $Cl^-$ to produce IrCl(CO)$(Ph_3P)_2$. It is suggested that the catalytic polymerization of AN with Ir$(ClO_4)(AN)(CO)(Ph_3P)_2$ proceeds through the formation of [(CO)(Ph_3P)_2$Ir(-CH=CHCN)(H)($CH_2$=CHCN)]Cl$O_4$ followed by the formation of iridium(alkyl)(alkenyl) type complex which undergoes a reductive elimination to produce the polymer of acrylonitrile.

• Journal of the Korean Magnetics Society
• /
• v.18 no.6
• /
• pp.232-236
• /
• 2008

Dependence of interlayer exchange coupling on antiferromagnetic IrMn thickness, thermal stability, and parallel anisotropy angle in perpendicular anisotropy [CoFe/Pt/CoFe]/IrMn multilayers was investigated. The magnetic property of [CoFe($10{\AA}$)/Pt($8{\AA}$)/CoFe($10{\AA}$)] induced by antiferromagnetic ordering of IrMn layer was maintained a stable perpendicular anisotropy up to $250^{\circ}C$ and from $7{\AA}$ to $160{\AA}$ of IrMn thickness. The value of interlayer exchange coupling of [CoFe/Pt/CoFe]/IrMn multilayers with perpendicular anisotropy increased to 1.5 times at anisotropy angle of $60^{\circ}$ more than of $0^{\circ}$. On the other side, the interlayer exchange coupling at anisotropy angle of $90^{\circ}$ was $\infty$ Oe, it was likely diverted to a parallel shape magnetization.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.11
• /
• pp.961-966
• /
• 1994

Oligomerization of phenylacetylene is catalyzed by $Rh(ClO_4)(CO)(PPh_3)_2$ (Rh-1), $[Rh(CO)(PPh_3)_3]ClO_4$ (Rh-2), $[Rh(COD)L_2]ClO_4 (L_2=(PPh_3)_2$, Rh-3; $(PPh_3)(PhCN)$, Rh-4; $(PhCN)_2$, Rh-5), $[Rh(C_3H_5)(Cl)(CO)(SbPh_3)_2]ClO_4$ (Rh-6), $[Ir(COD)L_2]ClO_4 (L_2=(PPh_3)_2$, $Ir-1; (PPh_3)(PhCN)$, $Ir-2; (PhCN)_2$, Ir-3; (AsPh_3)(PhCN)$, $Ir-4; Ph_2PCH_2CH_2PPh_2$, Ir-5; COD, Ir-6 and 2,2'-dipyridyl, Ir-7), $Ir(ClO_4)(CO)(PPh_3)_2$, $Ir-8, [Ir(PhCN)(CO)(PPh_3)_2]ClO_4$, Ir-9 to produce dimerization products, 1,3-diphenylbut-1-yn-3-ene, 1, (E)-1,4-diphenylbut-1-yn-3-ene, 2 and (Z)-1,4-diphenylbut-1-yn-3-ene, 3, and cyclotrimerization products, 1,3,5-triphenylbenzene, 4 and 1,2,4-triphenylbenzene, 5. Product distribution of the oligomers varies depending on various factors such as the nature of catalysts, reaction temperature, counter anions and excess ligand present in the reaction mixtures. Increasing reaction temperature in general increases the yield of the cyclotrimerization products. Exclusive production of dimer 1 and trimer 4 can be obtained with Ir-1 at 0 $^{\circ}$C and with Ir-2 in the presence of excess PhCN (or $CH_3CN$) at 50 $^{\circ}$C, respectively. Dimer 2 (up to 81%) and trimer 5 (up to 98%) are selectively produced with Rh-1 at 50 and 100 $^{\circ}$C respectively. Production of 3 is selectively increased up to 85% by using $PF_6$- salt of $[Ir(COD)(PPh_3)_2]$+ at 25 $^{\circ}$C. Addition of $CH_3I$ to Rh-1 produces $CH_3PPh_3^+I-$ and increases the rate of oligomerization(disappearance of phenylacetylene). Among the metal compounds investigated in this study, Ir-1 catalyzes most rapidly the oligomerization where the catalytically active species seems to contain lr(PPh3)2 moiety. The stoichiometric reaction of phenylacetylene wth Ir-9 at 25 $^{\circ}$C quantitatively produces hydridophenyl-ethynyl iridium(III) complex, $[lr(H)(C{\equiv}CPh)(PhCN)(CO)(PPh_3)_2]ClO_4$ (Ir-11), which seems to be an intermediate for the oligomerization.

• Information and Communications Magazine
• /
• v.34 no.4
• /
• pp.33-38
• /
• 2017

본고에서는 최근 새로이 각광받고 있는 UWB 기술을 소개한다. IR-UWB 측위 관련 국내 및 해외 동향을 살펴보고, IR-UWB 표준에 의거하여 IR-UWB 신호 및 프레임 구조, 계층 구조 등에 대하여 서술하였다. 그리고 IR-UWB를 이용하여 고정밀 거리추정 및 위치추정을 하는 연구 동향에 대하여 살펴보았으며, 마지막으로 기술 동향을 정리하여 IR-UWB 관련 회사의 제품을 소개하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.88-90
• /
• 2018

There are many studies on IR-UWB Radar. A number of studies have been conducted on the Personnel count and measurement distance to person, mainly using IR-UWB. In this paper, however, we use IR-UWB Radar to distinguish objects. In order to distinguish these objects, in this paper, the IR-UWB radar is operated by positioning the object at a certain distance and the object is classified by using the size and shape of the wave reflected by the object. To distinguish objects using only the size and shape of these waveforms, SVM (Support Vector Machine) was used to classify objects by learning shape and size of waveforms. In this paper, we show that the size and shape of the waveform received by the IR-UWB Radar can be identified by SVM pattern learning.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.7
• /
• pp.568-575
• /
• 2016

For the combat survivability, an infrared signature emitted from aircraft is needed to be predicted and analyzed. In this study, we studied the infrared signature from the exhaust plume from the viewpoint of Infrared(IR) detector. The Line-By-Line method using the radiation database is used for radiative property, and radiative intensity analysis is conducted along 1-D line of sight based on the radiative property. The numerical thermo-fluid field for the plume is conducted by ANSYS FLUENT, while setting the lines of sight having the different detection angle on the thermo-fluid field. We found the high IR signature on the line of sight passing through the locally high temperature region of the plume inside, and the strongest signature from the line of sight toward the nozzle surface. Based on this, it confirms the influence of the surface radiative emission on the infrared signature.