• Journal of Korean Society on Water Environment
• /
• v.23 no.3
• /
• pp.314-318
• /
• 2007

The feasibility of the employment of waste oyster shell as an adsorbent for fluoride ion has been tested by considering the effect ionic condition on the adsorption of fluoride ion on oyster shell. The adsorption capacity of oyster shell for fluoride ion was found not to be significantly influenced by the ionic strength of aqueous environment. The existence of complexing agent such as nitrilotriacetic acid in wastewater decreased the adsorbed amount of fluoride ion by forming a stable complex of $CaT^-$ and the adsorption reaction of fluoride ion on oyster shell was examined to be endothermic. The coexisting heavy metal ionic adsorbate in wastewater hindered the adsorption of fluoride ion, however, its adsorbed amount was increased as the particulate size of adsorbent was decreased. Finally, a serial adsorption column test has been conducted for a practical application of adsorption process and the breakthrough of the column adsorption was observed in 22 hours under the experimental condition.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.1
• /
• pp.1-10
• /
• 2009

This article reviewed transport behaviours of electroactive species in ionic compounds, focusing on chemical diffusion of Li through the transition metal oxide in a current flowing condition. For this purpose, a distinction has been first briefly made between migration and diffusion with respect to current, driving force and charge of electroactive species considered. Then, the equations for chemical diffusion are derived theoretically in open-circuit and current flowing conditions. Finally, the experimental methods such as ac impedance spectroscopy and current (potential) transient techniques are described in details for characterising chemical diffusion. In addition, the role of the thermodynamic enhancement factor in chemical diffusion is discussed.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.378-378
• /
• 2009

The ionic liquid-based sulfonated hydrocarbon composite membranes was prepared for use in anhydrous high temperature-polymer electrolyte fuel cells (HT-PEFCs). Ionic liquid behaves like water in the composite membranes under anhydrous condition. However the composite membranes show a low conductivity and high gas permeability as the content of ionic liquid increases due to its high viscosity and content of ionic liquid, respectively. Hence, in order to enhance the proton conductivity and to reduce the gas permeability of the composite membranes with low content of ionic liquids, the acid containing a common ion of ionic liquid was added to the composite membranes. The characterization of composite membranes was carried out using small-angle X-ray scattering (SAXS), thermogravimetric analyzer (TGA) and impedance spectroscopy. As a result, the composite membranes containing acid showed higher proton conductivity than those with no acid under the un-humidified condition due to a decrease in viscosity. In addition, the proton conductivity of composite membranes increased with increasing mole concentration of acid.

• Journal of the Korean Ceramic Society
• /
• v.50 no.2
• /
• pp.103-107
• /
• 2013

In this study, the ionic liquid 1-ethyl-3-methylimidazolium tetraflouroborate (EMI-BF4) was synthesized and purified using the liquid/liquid fractional distillation method to apply a supercapacitor. EMI-BF4 was extracted with dichloromethane from the liquid/liquid extraction method in acidic, neutral, and alkali conditions for removal of impurity, and then the electrical capacities of the purified ionic liquids were measured and compared. The electrical capacities of ionic liquids under acidic condition showed higher value than those of neutral or alkali conditions. As the ratio of ionic liquid to solvent became higher, the electrical capacity value was increased.

• Journal of Institute of Convergence Technology
• /
• v.4 no.1
• /
• pp.5-8
• /
• 2014

Recently ionic liquids received much attention as novel materials capable of replacing traditional solvents. The applicability of the ionic liquids should be determined based on their physico-chemical properties. Heat capacity is one of the most important properties to be considered when a process is developed using the ionic liquids and currently DSC has been proved as an effective technique to measure the heat capacity. Micro DSCII can measure heat capacities of various liquids by both an isothermal step method and a scanning method. DSC Q100 and MDSC are able to measure heat capacities of several ionic liquids. For each ionic liquid linear regression of the heat capacity as a function of temperature has been performed to increase accuracy. To investigate the feasibility of ionic liquids as PCMs, their heat capacities have been measured by using Pysis I DSC. This paper briefly summarizes the present techniques of measuring heat capacities of ionic liquids by DSC.

• Journal of the Korean Society of Visualization
• /
• v.17 no.1
• /
• pp.43-52
• /
• 2019

'Ionic wind' is phenomenon induced by corona discharge which occurs when large electric potential is applied to electrodes with high curvature. The ionic wind has advantage that it could generate forced convective flow without any external energy like separate pump. In this study, 'pin-mesh' arrangement is utilized for experiments. First, optimization of configuration is conducted with local momentum of ionic wind behind the mesh. Empirical equation for prediction about velocity profile was derived using the measured results. Secondly, the enhancement of mass transfer rate of acetone with ionic wind was analyzed. Also, the drying efficiency using a fan which has same flow rate was compared with ionic wind for identification of additional chemical reaction. At last, the drying process of organic solvent was visualized with image processing. As a result, it was shown that the use of ionic wind could dry organic matter four times faster than the natural condition.

• Fashion & Textile Research Journal
• /
• v.11 no.3
• /
• pp.465-468
• /
• 2009

In this study, acid cellulase was used to treat denim fabrics by varying pH, temperature, enzyme concentration, treatment time and non-ionic surfactant (Triton X-100) concentration. Treatment condition was controlled based on the weight loss. The characteristics of enzyme-treated fabrics were measured in terms of tearing strength, stiffness, and color difference. The optimum conditions for cellulase treatment of denim fabric were pH 5.0, $50^{\circ}C$, 3% (o.w.f.), 90minutes. The weight loss did not change significantly with the addition of a non-ionic surfactant, but it improved when more non-ionic surfactant were used. The tearing strength of enzyme-treated denim fabrics did not deteriorate. The stiffness of the treated fabrics improved with the enzymatic treatment with and without the non-ionic surfactant. The difference in color of fabrics treated with enzyme increased.

• Computers and Concrete
• /
• v.13 no.2
• /
• pp.149-171
• /
• 2014

This study presents the mathematical model for predicting chloride penetration into saturated concrete under non-isothermal condition. The model considers not only diffusion mechanism but also migration process of chloride ions and other chemical species in concrete pore solution such as sodium, potassium, and hydroxyl ions. The coupled multi-ionic transport in concrete is described by the Nernst-Planck equation associated with electro-neutrality condition. The coupling parameter taken into account the effect of temperature on ion diffusion obtained from available test data is proposed and explicitly incorporated in the governing equations. The coupled transport equations are solved using the finite element method. The numerical results are validated with available experimental data and the comparison shows a good agreement.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.2
• /
• pp.30-34
• /
• 2021

Electrical failures and reliability problems of electronic components by ionic migration between adjacent device terminals have become an issue in automotive electronics. Especially unlike galvanic corrosion, ionic migration is occurred at high temperature and high humidity under applied electric field condition. Until now, although extensive studies of the ionic migrations dealing with PCBs, electrodes, and solders were reported, there is no study on the effect of insulation polymers and metallic fillers for ionic migration. In this research, therefore, ionic migration induced by the types and contents of polymers and metallic fillers, and variety conditions of temperature, humidity, and applied voltage was studied in detail. Ester and amide types of liquid crystal polymer (LCP) and poly (phthalamide) (PPA) were used as base polymers, respectively and compounded with the metallic fillers of Copper iodide (CuI), Zinc stearate (Zn-st), or Calcium stearate (Ca-st) in various compositions. The compounding polymers were fabricated in IPC-B-24 of SIR test coupon according to ISO 9455-17 with Cu electrodes for ionic migration test. While there is no change in LCP-based samples, ionic migration in PPA compounding sample with a high water absorption property was accelerated in the presence of 0.25 wt% or above of CuI at the environmental conditions of 85℃, 85% RH and 48V. The dendritic short-circuit growth of Cu caused by ionic migration between the electrodes on the surface of compounded polymers was systematically observed and analyzed by using optical microscopy and SEM (EDX).

• Smart Structures and Systems
• /
• v.4 no.5
• /
• pp.549-563
• /
• 2008

The ability of an electroactive polymer, IPMC (Ionic Polymer Metal Composites,) to produce electric charge under mechanical deformations may be exploited for the development of next generation of energy harvesters. Two different electrode types (gold and platinum) were employed for the experiments. The sample was tested under dynamic conditions, produced through programmed shaking. In order to evaluate the potential of IPMC for dry condition, these samples were treated with ionic liquid. Three modes of mechanical deformations (bending, tension and shear) were analyzed. Experimental results clearly indicate that IPMCs are attractive applicants for energy harvesting, with inherent advantages like flexibility, low cost, negligible maintenance and virtually infinite longevity. Besides, preliminary energy harvesting model of IPMC has been formulated based upon the work of previous investigators (Newbury 2002, Newbury and Leo 2002, Lee, et al. 2005, Konyo, et al. 2004) and the simulation results reciprocate experimental results within acceptable error.