• 제목/요약/키워드: Ionic Liquid

검색결과 472건 처리시간 0.021초

금속동결 전처리에 의한 유기이온 교환수지의 분쇄효과 (The Effect of Rapid Freeze Pretreatment on Grinding of Organic Ion Exchange Resins)

  • 임성팔;김준형;손종식
    • 공업화학
    • /
    • 제1권1호
    • /
    • pp.23-29
    • /
    • 1990
  • 급속동결 전처리가 유기이온교환 수지의 분쇄에 미치는 효과를 연구하였다. 습윤상태의 이온교환 수지를 고체탄산 또는 액체질소를 이용하여 급속동결하면 이온교환 수지의 내부구조가 물리적으로 파괴되며 일단 파괴된 수지는 다시 실온이 되어도 원래의 상태로 회복되지 않음을 발견하였다. 따라서 급속동결한 수지는 실온에서도 분쇄가 매우 용이하며 이 효과는 양이온교환 수지가 음이온교환 수지에 비하여 더 크게 나타났다. 아울러 음이온교환 수지의 경우, 급속동결 전처리 효과 뿐만 아니라 이온종류 역시 분쇄에 큰 영향을 미침을 관찰할 수 있었다.

  • PDF

계면활성제 수용액에 의해 재생된 활성탄 촉매의 탈질 성능 ($DeNO_{x}$ Performance of Activated Carbon Catalysts Regenerated by Surfactant Solution)

  • 박혜민;박영권;전종기
    • Korean Chemical Engineering Research
    • /
    • 제49권6호
    • /
    • pp.739-744
    • /
    • 2011
  • 선택적환원 반응용 활성탄 촉매는 액정디스플레이 제조 공정에서 배출되는 붕소를 포함하는 배가스 중의 $NO_x$를 제거하는데 사용되는데, 붕소가 촉매의 세공을 막거나 활성점에 침적되어 촉매 비활성화가 발생하게 된다. 폐촉매는 다양한 계면활성제를 포함하는 수용액 중에서의 세정, 건조 및 소성에 의해 재생이 가능하였다. 세정 과정의 조건, 계면 활성제 종류, 소성 조건 등을 변화시키면서 재생 전과 후의 폐촉매의 물리화학적 성능 비교를 위하여 질소 흡착 실험, ICP에 의한 원소 분석을 수행하였다. 암모니아를 사용하는 선택적환원 반응은 고정층 촉매 반응기를 사용하여 $120^{\circ}C$에서 수행하였다. $90^{\circ}C$의 수용액에서 비이온 계면활성제를 사용하여 세정하고, 질소 분위기에서 $550^{\circ}C$에서 소성하여 재생한 활성탄 촉매는 붕소가 가장 많이 제거되어 신규 활성탄과 유사한 수준의 표면적과 $NO_x$ 제거 효율을 회복하였다.

Sol-Gel법에 의한 ${Ta_2}{O_5}$ 박막의 전기전도와 광학적 특성 (The Electrical Conduction and Optical Properties of ${Ta_2}{O_5}$ Thin Films by Sol-Gel Method)

  • 유영각
    • 한국전기전자재료학회논문지
    • /
    • 제13권7호
    • /
    • pp.575-582
    • /
    • 2000
  • The Electrical conduction and optical properties of Ta$_{2}$/O$_{5}$ thin films as the insulators in DRAM capacitors were studied. Liquid Ta/sib 2//O sub 5/ were prepared by a sol-gel processing and multiple layers were applied by spin-coating up to thickness of 800$\AA$. At annealing temperature of 300~$600^{\circ}C$ the electrical conduction and specific dielectric constant were discussed the behaivor of carrier were observed by the Thermally Stimulated Current (TSC) at the temperature range of 30~23$0^{\circ}C$. At annealing temperature of 300~$600^{\circ}C$ the samples were found to be amorphous below $600^{\circ}C$ and crystalline over it. The electrical strength was about 2.2 MV/cm at 40$0^{\circ}C$. In spite of noncrystallization over 50$0^{\circ}C$ the increasing of leakage current due to pinholes and increasing creak. The refractive index was obtained maximum (2.2) at 40$0^{\circ}C$. The dielectric constant was obtained maximum(18.6) at 40$0^{\circ}C$. TSC was observed one peak at the temperature range of 30~23$0^{\circ}C$ from sample at 40$0^{\circ}C$. In the case of collecting voltage the peak size is decreased in proportion to collecting voltage and then the peak may be thought carrier to be a ionic space charge.e.

  • PDF

상온(常溫) 전해법(電解法)에 의한 리튬 금속(金屬)의 회수(回收): I. 전극물질(電極物質)의 영향(影響) (Recovery of Metallic Lithium by Room-Temperature Electrolysis: I. Effect of Electrode Materials)

  • 이재오;박제식;이철경
    • 자원리싸이클링
    • /
    • 제21권6호
    • /
    • pp.45-50
    • /
    • 2012
  • 리튬 리싸이클링의 일환으로 상온 전해법으로 금속형태의 리튬을 회수하는 연구를 수행하였다. 리튬 전해액으로 이온성액체인 PP13TFSI에 리튬염으로 LiTFSI를 용해시켜 사용하였으며, 작동전극으로 금, 백금 및 구리를 각각 적용하였다. 작동전극 상에서 조사한 순환전위주사 실험 결과로부터 리튬의 상온 전해환원에 대한 가능성을 확인하였으며, 백금이나 구리의 경우 보다 금 전극에서 리튬 환원전류가 더 크게 나타났다. 정전위법(-2.4 V vs. Pt-QRE)으로 1시간동안 금 전극 상에 전착한 다음, 전극표면을 SEM-EDS 및 XRD 분석을 하였다. 전착된 리튬은 금속 리튬 혹은 금과의 합금 형태이었으며, 침상형으로 균일하게 전착되었음을 확인하였다. 또한 전착물에 미량의 산소가 검출되는 것은 분석과정에서 시편이 공기 중에 노출되었기 때문으로 판단된다.

Starch-g-PAN 고분자 전해질막 합성 및 플렉서블 고체 슈퍼 캐퍼시터 응용 (Synthesis of Starch-g-PAN Polymer Electrolyte Membrane and Its Application to Flexible Solid Supercapacitors)

  • 민효준;정주환;강미소;김종학
    • 멤브레인
    • /
    • 제29권3호
    • /
    • pp.164-172
    • /
    • 2019
  • 본 연구에서는 녹말(starch)과 poly(acrylonitrile) (PAN)으로 이루어진 가지형 공중합체 기반의 슈퍼 캐퍼시터용 전해질막을 손쉽게 제조하는 방법을 제시하였다. 가지형 공중합체(starch-g-PAN)는 세륨 이온에 의해 개시된 자유 라디칼 중합을 통해 합성되었다. 실온에서 어떠한 유기용매 없이 Starch-g-PAN 고분자를 이온성 액체, 1-ethyl-3-methylimidazolium dicyanamide (EMIM DCA)에 용해하였으며 1시간 동안 $100^{\circ}C$의 고온을 가해줌으로써 손쉽게 고분자 막을 만들었다. 제조된 막은 유연하여 플렉서블 고체 슈퍼 캐퍼시터의 전해질에 적용되었다. Starch-g-PAN 기반의 고분자 전해질막을 사용한 슈퍼 캐퍼시터는 0.5 A/g의 전류 밀도에서 약 21 F/g의 정전용량을 가졌으며 10,000 사이클 동안 86%의 유지율을 보이며 높은 주기 안정성을 보였다. 본 연구를 통해 starch-g-PAN 기반의 고분자 전해질막이 우수한 성능을 가진 플렉서블 고체 슈퍼 캐퍼시터에 응용될 수 있음을 확인하였다.

황산용액에서 용매추출에 의한 코발트(II), 니켈(II) 및 구리(II) 분리 (Separation of Co(II), Ni(II), and Cu(II) from Sulfuric Acid Solution by Solvent Extraction)

  • 문현승;송시정;;이만승
    • 자원리싸이클링
    • /
    • 제31권1호
    • /
    • pp.21-28
    • /
    • 2022
  • 폐리튬이온배터리를 고온에서 용융환원시키면 코발트, 니켈 및 구리 금속합금상을 얻을 수 있다. 이러한 금속합금상으로부터 금속을 분리회수하기 위한 공정을 개발하기 위해 코발트, 니켈 및 구리 금속을 혼합한 금속혼합물을 3% 과산화수소를 함유한 2 M 황산용액으로 침출하면 9.6%의 구리와 함께 코발트와 니켈이 모두 침출된다. 침출용액에서 Cyanex 301로 구리(II)가 선택적으로 추출되었으며, 30% 왕수로 구리(II)를 탈거했다. 구리가 분리된 여액에서 이온성액체인 ALi-SCN으로 Co(II)를 선택적으로 추출했으며, 15%의 암모니아용액으로 3단의 교차식 탈거를 통해 모두 탈거했다. 본 연구를 통해 코발트, 니켈 및 구리 금속혼합물의 황산침출액에서 용매추출로 세 금속을 분리할 수 있는 공정을 제안했다.

An Investigation of Interfacial Strength in Epoxy-based Solid Polymer Electrolytes for Structural Composite Batteries

  • Mohamad A. Raja;Su Hyun Lim;Doyun Jeon;Hyunsoo Hong;Inyeong Yang;Sanha Kim;Seong Su Kim
    • Composites Research
    • /
    • 제36권6호
    • /
    • pp.416-421
    • /
    • 2023
  • Multifunctional composite materials capable of both load-carrying and energy functions are promising innovative candidates for the advancement of contemporary technologies owing to their relative feasibility, cost-effectiveness, and optimized performance. Carbon fiber (CF)-based structural batteries utilize the graphitic inherent structure to enable the employment of carbon fibers as electrodes, current collectors, and reinforcement, while the matrix system is an ion-conduction and load transfer medium. Although it is possible to enhance performance through the modification of constituents, there remains a need for a systematic design methodology scheme to streamline the commercialization of structural batteries. In this work, a bi-phasic epoxy-based ionic liquid (IL) modified structural battery electrolyte (SBE) was developed via thermally initiated phase separation. The polymer's morphological, mechanical, and electrochemical characteristics were studied. In addition, the interfacial shear strength (IFSS) between CF/SBE was investigated via microdroplet tests. The results accentuated the significance of considering IFSS and matrix plasticity in designing composite structural batteries. This approach is expected to lay the foundation for realizing smart structures with optimized performance while minimizing the need for extensive trial and error, by paving the way for a streamlined computational design scheme in the future.

Screening of nanoemulgels for physicochemical stability and antifungal efficacy

  • Andleeb Fatima;Muhammad Naeem Aamir;Shahiq-Uz-Zaman;Masood-Ur-Rehman;Zeeshan Javaid;Keng Wooi Ng;Hina Hussain;Muhammad Asif
    • Advances in nano research
    • /
    • 제16권6호
    • /
    • pp.593-600
    • /
    • 2024
  • The nanoemulgel was prepared to induce a synergistic effect along with higher efficacy. Nine sets of macroemulsion were made in which liquid paraffin was stabilized by the two non-ionic surfactants, Tween® 80 and Span® 80. Comparative stability analysis of the macroemulsions was used to determine the effective surfactant concentrations that gave the most stable systems (NE 2, NE3, NE4, NE5). High-speed homogenization was then applied. The final formulation was evaluated for globule size and polydispersablity index, physical properties (color, homogeneity, consistency, syneresis), pH, viscosity, spreadability with 200 g and 500 g weight, conductivity, drug content, stability, skin irritation, antifungal efficacy. Zeta size analysis confirmed the nanosize of the droplets in NE2 (284.8 nm), NE3 (79.89 nm), NE4 (194 nm) but not NE5 (632.8 nm), which was outside the nanoemulsion range. The antifungal assay exhibited zone of inhibition for NE3 (43±1.0 mm) and NE4 (42±1.7 mm), a marketed cream (33±1 mm), fluconazole alone (35±1 mm) and terbinafine alone (35.0±1.7 mm). The zone of inhibition of nanoemulgels increased compared with the drugs when used individually and when compared a placebo.

전고체전지용 붕산염 유리 세라믹 고체 전해질의 조성비에 따른 소결 특성 연구 (Sintering Behavior of Borate-Based Glass Ceramic Solid Electrolytes for All-Solid Batteries)

  • 이정민;정동석;강성현;;최은하;신원호
    • 한국전기전자재료학회논문지
    • /
    • 제37권4호
    • /
    • pp.445-450
    • /
    • 2024
  • The expansion of lithium-ion battery usage beyond portable electronic devices to electric vehicles and energy storage systems is driven by their high energy density and favorable cycle characteristics. Enhancing the stability and performance of these batteries involves exploring solid electrolytes as alternatives to liquid ones. While sulfide-based solid electrolytes have received significant attention for commercialization, research on amorphous-phase glass solid electrolytes in oxide-based systems remains limited. Here, we investigate the glass transition temperatures and sintering behaviors by changing the molecular ratio of Li2O/B2O3 in borate glass comprising Li2O-B2O3-Al2O3 system. The glass transition temperature is decreasing as increasing the amount of Li2O. When we sintered at 450℃, just above the glass transition temperature, the samples did not consolidate well, while the proper sintered samples could be obtained under the higher temperature. We successfully obtained the borate glass ceramics phases by melt-quenching method, and the sintering characteristics are investigated. Future studies could explore optimizing ion conductivity through refining processing conditions, adjusting the glass former-to-modifier ratio, and incorporating additional Li salt to enhance the ionic conductivity.

Metabolomic profiling of embryo culture media in patients with repeated implantation failure during assisted reproductive technology cycles

  • Sheyda Nami;Azam Govahi;Nabaa Najjar;Samaneh Ghasemi;Farshid Rezaei;Fatemehsadat Amjadi;Gholamreza Taheripak
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제51권3호
    • /
    • pp.260-267
    • /
    • 2024
  • Objective: This study investigated the metabolic status of the spent culture media from embryos of patients with repeated implantation failure (RIF) undergoing in vitro fertilization-intracytoplasmic sperm injection cycles in comparison with the embryos from healthy fertile women. Methods: Metabolite levels in spent culture media were assessed and compared between embryos from RIF patients (n=35) and oocyte donors as controls (n=15). Protein levels of insulin-like growth factor 1 (IGF-1) were determined using Western blotting. Concentrations of glucose, pyruvate, and lactate were measured using spectrophotometry. Ionic colorimetric assay kits were utilized to analyze the concentrations of sodium, chloride, calcium, and magnesium ions. High-performance liquid chromatography was employed to measure the concentrations of glutamic acid, aspartic acid, methionine, phenylalanine, and histidine. Results: Glucose consumption and lactate secretion were higher in the control group than in the RIF group. The magnesium concentration was significantly higher in the control group than in the RIF group, but glutamic acid and aspartic acid concentrations were lower in the control group than in the RIF patients (p<0.05). The levels of IGF-1, sodium, calcium, chloride, methionine, histidine, and phenylalanine did not show statistically significant differences between the two groups. Conclusion: The metabolic profile of the culture medium of the embryos in the RIF group differed from that of the control group. These findings suggest potential factors that may affect implantation capacity in RIF patients and provide a new perspective on embryo selection.