• 멤브레인
• /
• 제21권3호
• /
• pp.270-276
• /
• 2011

기질 고분자인 sulfonated PEEK (sPEEK)와 가교제(cross-linking reagent) 4,4'-ethyldianiline (EdAn), 그래프트제(grafting reagent) 2-phenylethylamine (PEA)을 용매 dimethylacetamide (DMAc)에 녹여 용매증발법을 이용하여 제막하였다. 이민화 반응(imination)과 술폰화(sulfonation) 과정을 거쳐 최종 이온교환막인 cross-linked and grafted sPEEK (CG-sPEEK)막을 제조하였다. FT-IR 분석을 통해 술폰화 및 이민화 반응여부를 확인할 수 있었다. Proton conductivity와 water uptake, volume change를 측정하여 상용화된 Nafion115와 비교함으로써 이온교환막으로서의 활용가능성을 평가하였다. 제조된 CG-sPEEK막의 proton conductivity (0.17 S/cm) 값이 Nafion115 (0.10 S/cm) 보다 우수하게 나타나 이온교환막으로서의 적용가능성을 보여주었다. 다만 높은 water uptake (130%)는 CG-sPEEK의 치수안정성을 위해서 저감시킬 필요가 있다.

• 한국물환경학회지
• /
• 제30권5호
• /
• pp.517-523
• /
• 2014

In order to remove both nitrate and sulfate present in the concentrate of RO(reverse osmosis) process, a combined bio-regeneration and ion-exchange(IX) system was studied. For this purpose, both denitrifying bacteria(DNB) and sulfate reducing bacteria(SRB) were simultaneously cultivated in a bio-reactor under anaerobic conditions. When the IX column containing a nitrate-selective A520E resin was fully exhausted by nitrate and sulfate, the IX column was bio-regenerated by pumping the supernatant of the bio-reactor, which contains MLSS concentration of $125{\pm}25mg/L$, at the flowrate of 360 BV/hr. Even though the nitrate-selective A520E resin was used, the breakthrough curves of ionic species showed that sulfate was exhausted earlier than nitrate. The reason for this result is due to the fact that the concentration of sulfate in RO concentrate was 36 to 48 times higher than nitrate. The bio-reactor was successfully operated at a volumetric loading rate of 0.6 g $COD/l{\cdot}d$, nitrate-N loading rate of 0.13 g $NO_3{^-}-N/l{\cdot}d$, and sulfate loading rate of 0.08 g $SO_4{^{2-}}/l{\cdot}d$. The removal rate of SCOD, nitrate-N, sulfate was 90, 100, and 85%, respectively. When the virgin resin was fully exhausted and consecutively bio-regenerated for 2 days, 81% of nitrate and 93% of sulfate were reduced. When the virgin resin was repeatedly used up to 4 cycles of service and bio-regeneration, the ion-exchange capacity of bio-regenerated resin decreased to 95, 91, 88, and 81% of virgin resin.

• 멤브레인
• /
• 제33권5호
• /
• pp.257-268
• /
• 2023

막 축전식 탈염 공정(membrane capacitive deionization, MCDI)은 이온교환막을 다공성 전극과 함께 사용하여 탈염 효율을 향상시킬 수 있는 CDI 공정의 변형이다. 이온교환막은 MCDI의 성능에 큰 영향을 미치는 핵심 구성요소이다. 본 연구에서는 MCDI의 탈염 효율을 크게 향상시킬 수 있는 이온교환막의 최적 제조 인자를 도출하고자 하였다. 이를 위해 PE 다공성 필름의 세공에 단량체를 충진하고 in-situ 광중합을 진행하여 세공충진 이온교환막(pore-filled ion-exchange membranes, PFIEMs)을 제조하였다. 실험 결과, 제조된 PFIEMs은 다양한 탈염 및 에너지 변환 공정에 적용할 수 있는 수준의 우수한 전기화학적 특성을 나타내었다. 또한, MCDI 성능과 막 특성 인자와의 상관성 분석을 통해 막의 가교도를 제어하여 막의 전기적 저항이 충분히 낮은 범위에서 이온 선택 투과성을 최대화하는 것이 MCDI의 성능 향상을 위해 가장 바람직한 막제조 조건이라는 결론을 얻었다.

• 대한화학회지
• /
• 제9권1호
• /
• pp.23-28
• /
• 1965

90% ethanol solution에서 benzyl chloride와 radioactive chloride($^{36}Cl^-$)와의 exchange를 反應速度論的으로 硏究하였으며 그 結果로 交換反應은 typical bimolecular reaction임을 알았고 그 activation parameter들은 각기 다음과 같았다. ${\Delta}H^{\neq}$= 18.50 Kcal ${\Delta}S^{\neq}$= -22.09 e.u. 특히 本實驗 缺課와 다른 實驗結果를 綜合討論함으로써 反應速度는 attacking anion의 nuclephilic ability에 크게 관계 됨을 입증할 수 있었으며 또한 exchange reaction에 있어서 halide들의 reactivity의 순서는 bond dissociation energy의 差로써 보다는 오히려 Swain의 nucleophilic parameter(n)로써 설명함이 더욱 타당함을 알았다.

• 한국수소및신에너지학회논문집
• /
• 제22권2호
• /
• pp.184-190
• /
• 2011

The membrane properties (membrane resistance and ion exchange capacity) of the five types of commercial anion exchange membrane, i.e. IOMAC, AHT, APS, AHA, AFN, were evaluated for the application in the alkaline electrolysis. The membrane resistance decreased in the order; in 1M KOH: AHT>IOMAC>AHA>AFN>APS; in 1M NaOH: AHT>IOMAC>AHA>APS>AFN. The ion exchange capacity decreased in the order: AFN>APS>AHT>AHA>IOMAC. The membrane life was determined from the change of membrane resistance in 1M KOH and NaOH with an increase of soaking time in 20 wt% KOH and 30 wt% NaOH solution. AHA membrane had a good membrane life in 20 wt% NaOH with its unchanged membrane resistance. And, AFN and AHA membrane had a good membrane life in 30 wt% NaOH with its unchanged membrane resistance.

• 한국세라믹학회지
• /
• 제21권1호
• /
• pp.41-50
• /
• 1984

The ion-exchange porous glasses were prepared by heat treating and subsequently acid treating the (95-y) $SiO_2$.$yB_2O_3$.$5Na_2O+xAl_2O_3$ glasses with y=55, 45, 35, 25. mole% and x=0, 2, 5, 9 mole% It was then investigated how the cation exchange capacity was affected by the phase separation in these glasses. For that matter such quantities as alkali extraction amount pore volume and specific surface area of the glasses were measured. The phase separation in these glasses was in general suppressed by the addition of $Al_2O_3$ maximally around the composition of 5 mole% $Al_2O_3$ This may be because the micro-phase separation prevailed in the glass of that composition over the macro-phase separation increasing thereby the specific surface area as well as the residual amount Al of after acid-treatment and accordingly the cation exchange capacity. The maximum values of the cation exchange capacity was observed to be about 150meq/100g for the glasses of (40-50) $SiO_2$ (55~45)$yB_2O_3$. $5Na_2O+5Al_2O_3$.

• 한국환경과학회지
• /
• 제9권2호
• /
• pp.165-171
• /
• 2000

A kinetic study for anion exchange was performed for commercially available Cl- type anion exchange resin in use to remove nitrate in water. The obtained results from the batch reactor were applied to the Langmuir and Freundlich models. The constants for Lagmuir model were qmax =29.82 and b=0.202, and for Freundlich model were K=5.509 and n=1.772. Langmuir model showed betterfit than Frendlich model for the experimental results. Ion exchange reaction rate was also calculated and the the approximate first-order reaction, rate constant k1 was 0.16 L/mg.hr. Effective diffusion coefficient was obtained in the range from $9.67$\times$10^{-8} cm^2/sec$ for initial concentration change, and from $6.09$\times$10^{-7} to 3.98$\times$10^{-6} cm^2/sec$ for reaction temperature change. Activation energy during the diffusion was calculated as 26 kcal/mol.

• 대한화학회지
• /
• 제6권2호
• /
• pp.117-121
• /
• 1962

The waters throughout Taegu area for 87 points were analysed and according to the analytical data, following unfavorable characteristics for industrial uses were given: (1)Shows strong hardness, (2)Has high ratio of ignition residue to evaporation residue, (3) pH value is over 7, (4) Contains considerable quntities of iron.And then investigated the exchange rate and regeneration level of iron ion using cation exchange resin, Lewatit KS.When the hard water containing 2.2 ppm of iron with 18.4 ppm of calcium and 6.2 ppm of magnesium was passed through the ion exchange resin under $3cc/cm^2/min$ in exhaustant flow rate, exchange rate of iron reached to 42% after 300 hours flow. The exchange efficiency shows abrupt decreasing in initial stage of flow up to 100 hours flow. The exchanger which contains iron was regenerated with 10% sodium hydroxide aqua solution under SV (space velocity) 4. By this method, 57% of iron was eliminated from exchanger while calcium and magnesium are removed as much as 85% and 87% respectively.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.640-647
• /
• 2023

Material corrosion in nuclear power plant (NPP) is not controlled only by amine injection but also by ion exchange (IX) which is the best option to remove trace Na⁺. This study was conducted to understand the Na⁺ leakage characteristics of IX beds packed with ethanolamine-form (ETAH-form) and hydrogen-form (H-form) resins in the simulated water-steam cycle in terms of intrinsic behaviors of four kinds of cation-exchange resins through ASTM test and Vanselow mass action modeling. Na⁺ was inappreciably escaped throughout the channel created in resin layer. Na⁺ leakage from IX bed was non-linearly raised because of its decreasing selectivity with increasing Na⁺ capture and with increasing the fraction of ETAH-form resin. Na⁺ did not reach the breakthrough earlier than ETAH⁺ and NH₄⁺ due to the increased selectivity of Na⁺ to the cation-exchange resin (H⁺ < ETAH⁺ < NH₄⁺ ≪ Na⁺) at the feed composition. Na⁺ leakage from the resin bed filled with small particles was decreased due to the enhanced dynamic IX processes, regardless of its low selectivity. Thus, the particle size is a predominant factor among intrinsic properties of IX resin to reduce Na⁺ leakage from the condensate polishing plant (CPP) in NPPs.

• 한국수소및신에너지학회논문집
• /
• 제33권1호
• /
• pp.28-37
• /
• 2022

In this study, we synthesized a poly(pheneylene oxide) (PPO)-based organic/inorganic composite membrane having silicotungstic acid (STA) for the development of an anion exchange membrane with excellent ionic conductivity and physicochemical stability. The organic/inorganic composite membranes were prepared by introducing different STA contents (0 wt%, 10 wt%, 30 wt%, and 50 wt%) into the quaternizaed(Q)-PPO matrix. The prepared anion exchange membranes were subjected to structural analysis by proton neclear magnetic resonance and Fourier transform infrared, and thermal behavior of membranes was confirmed by thermogravimetric analysis. Among the prepared composite membranes, the ion conductivity of Q-PPO/STA-50 (40.5 mS cm^-1) showed 1.46 times compared to that of the pristine membrane (27.6 mS cm^-1). Therefore, these results demonstrated that organic/inorganic composite membranes are promising candidates for application of anion exchange membranes.