• 콘크리트학회논문집
• /
• 제11권4호
• /
• pp.31-41
• /
• 1999

Blended Low Heat type cement is ground granulated blast furnace slag and fly ash mixed ternary with ordinary portland cement. From the viewpoint of X-ray patterns of domestic LHC, the main components of cement such as $C_2$S, $C_3$A, $C_3$S are considerably reduced. Therefore the heat evolution of LHC paste is 42cal/g lower than of OPC paste. At early age, the compressive strength development of LHC concrete is delayed, but the slump loss ratio of fresh concrete is reduced more than 20% with elapsed time. The penetrability of LHC is lower than that of OPC by 1/7.8 with the penetrability of chloride ion into the concrete until the age of 120 days. And the PD Index value of LHC is 0.44$\times$10-6 $\textrm{cm}^2$/s, which indicates only 39.3% of OPC. From the Mercury Intrusion Porosimetry test of cement past, we know that the pore size of LHC is more dense than that of OPC by production of C-S-H.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.253-254
• /
• 2022

In this study, catechol-functionalized chitosan (Cat-Chit), a well-known bioinspired polymer that imitates the basic structures and functions of living organisms and biological materials in nature, was synthesized and combined with cement mortar in various proportions. The compressive strength, tensile strength, drying shrinkage, accelerated carbonation depth, and chloride-ion penetrability of these mixes were then evaluated. In the ultraviolet-visible spectra, a maximum absorption peak appeared at 280 nm, corresponding to catechol conjugation. The sample containing 7.5% Cat-Chit polymer in water (CPW) exhibited the highest compressive strength, and its 28-day compressive strength was ~20.2% higher than that of a control sample with no added polymer. The tensile strength of the samples containing 5% or more CPW was ~2.3-11.5% higher than that of the control sample. Additionally, all the Cat-Chit polymer mixtures exhibited lower carbonation depths than compared to the control sample. The total charge passing through the samples decreased as the amount of CPW increased. Thus, incorporating this polymer effectively improved the mechanical properties, carbonation resistance, and chloride-ion penetration resistance of cement mortar.

• 한국지반환경공학회 논문집
• /
• 제8권2호
• /
• pp.57-63
• /
• 2007

석탄재는 석탄이 타고 남은 재로써 물리적 성질은 고은 모래정도이며 입자의 크기는 고은 자갈에서 고운 모래 사이다. 몇 가지 연구에서 석탄재는 건설재료의 하나인 모래와 대체 할 수 있다고 알려져 있다. 본 연구의 목적은 주입 공기 혼합 재를 사용한 석탄재의 혼합토를 직접 건설현장에 사용 하고자 하는데 있다. 실험 결과에 의하면 석탄재 혼합토는 압축, 인장 및 휨강도가 양생기간 초기에는 표준 혼합토보다 낮은 수치를 보이지만 60일이 지난 후엔 표준 혼합토보다 강도가 더 커졌다. 또한 Chloride 이온 통과 실험에서 석탄재의 시료토가 양생 초기에는 적은 저항력의 수치를 보였지만 시간이 흐를수록 강한 저항력을 보였다.

• 콘크리트학회논문집
• /
• 제17권5호
• /
• pp.793-801
• /
• 2005

본 연구는 100%의 순환굵은골재의 사용과 순환잔골재의 혼입률에 따른 콘크리트의 기본적인 물성 변화를 고찰하였으며 장기강도 증가 및 내구성 향상을 위한 방안으로 플라이애쉬를 시멘트 대체재로 사용한 순환골재 콘크리트의 강도 및 염소이온 침투 저항성과 중성화 저항성의 내구성에 대한 연구를 수행하였다. 또한 순환골재의 고부가가치 자원화로서의 활용도를 극대화시킬 수 있는 방안의 일환으로 프리캐스트 구조체로의 적용을 증기양생을 통하여 검증하였다. 순환굵은골재를 100%사용할 경우, 순환잔골재의 혼입률은 60%이하로 사용하는 것이 강도의 측면에서 유리한 것으로 판단된다. 또한 뽀일 강도를 비교한 결과 증기양생이 순환골재 콘크리트에도 무리 없이 적용될 수 있을 것으로 사료된다. 염소이온 투과 저항성은 플라이애쉬의 양에 따라 증가하였으며, 재령 21일에서는 낮음 그리고 56일에서는 매우 낮음으로 판명되었다. 촉진중성화에 따른 후 중성화 깊이 및 중성화 속도계수는 플라이애쉬의 양에 따라 증가하는 경향을 보였지만, 측정된 깊이는 약 10mm 이하로서 우려할 만한 정도는 아닌 것으로 판단된다.

• International Journal of Concrete Structures and Materials
• /
• 제5권2호
• /
• pp.119-123
• /
• 2011

Presented in the paper are findings of a project that examined the effect of slag grade and cement source on the performance of concrete mixtures. Slag cement contents were 20, 40, and 60 percent of the total cementitious material content. Two grades of slag cement were examined (Gr. 100 and Gr. 120) along with two sources of Type I cement. Compressive strength, durability, and permeability were measured. The results showed that the cement source affected the early age strength of the mixtures. At 28 days of age, mixtures containing Gr. 120 slag cement had higher compressive strengths than mixtures containing Gr. 100 slag cement, but by 90 days of age, the trend reversed. As for the chloride ion penetrability, mixtures cast with Gr. 100 slag cement passed fewer coulombs at 28 and 90 days of age than similar mixtures containing Gr. 120 slag. Mixtures containing Gr. 120 slag had the greatest durability factors.

• Advances in concrete construction
• /
• 제9권1호
• /
• pp.33-41
• /
• 2020

In this study, polyethylene glycol (PEG) and polyacrylamide (PAM) have been used as self-curing agents to produce self-curing concrete (SC). Compressive strength, ultrasonic pulse velocity (UPV), bulk electrical resistivity, chloride ion penetrability, water permeability, and main microstructural characteristics were examined under different curing regimes, and compared to those of the control concrete mixture with no self-curing agents. One batch of a control mixture and one batch of a SC mixture were air-cured in the lab to act as non-water-cured samples. The water curing regimes for the control mixture included continuous water curing for 3, 7, and 28 days and periodical moist curing using wetted burlap for 3 and 7 days. Curing regimes for the SC mixtures included 3 days of water curing and periodical moist curing for 3 and 7 days. SC mixtures showed better microstructure development and durability performance than those of the air-cured control mixture. A short water curing period of 3 days significantly improved the performance of the SC mixtures similar to that of the control mixture that was water cured for 28 days. SC concrete represents a step towards sustainable construction due to its lower water demand needed for curing and hence can preserve the limited water resources in many parts of the world.

• Computers and Concrete
• /
• 제14권3호
• /
• pp.299-313
• /
• 2014

Effects of polypropylene (PP) fibers, steel fibers (SF) and hybrid on the properties of highstrength fiber reinforced self-consolidating concrete (HSFR-SCC) under different volume contents are investigated in this study. Comprehensive laboratory tests were conducted in order to evaluate both fresh and hardened properties of HSFR-SCC. Test results indicated that the fiber types and fiber contents greatly influenced concrete workability but it is possible to achieve self consolidating properties while adding the fiber types in concrete mixtures. Compressive strength, dynamic modulus of elasticity, and rigidity of concrete were affected by the addition as well as volume fraction of PP fibers. However, the properties of concrete were improved by the incorporation of SF. Splitting tensile and flexural strengths of concrete became increasingly less influenced by the inclusion of PP fibers and increasingly more influenced by the addition of SF. Besides, the inclusion of PP fibers resulted in the better efficiency in the improvement of toughness than SF. Furthermore, the inclusion of fibers did not have significant effect on the durability of the concrete. Results of electrical resistivity, chloride ion penetration and ultrasonic pulse velocity tests confirmed that HSFR-SCC had enough endurance against deterioration, lower chloride ion penetrability and minimum reinforcement corrosion rate.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.7-15
• /
• 2017

PURPOSES : Infiltration of moisture, polluted material, and deicer into concrete, accompanied by freeze and thaw can cause significant deterioration of concrete pavement. In order to protect concrete from deterioration, it is necessary to prevent the infiltration of these concrete external materials. The moisture-repellent agent, which is a surface treatment and maintenance material added to concrete structures to render them water resistant, has advantages such as prevention of water infiltration and security against air permeation. Nano-coat, which is referred to as silicon hydride, is typically used as a moisture-repellent agent. Therefore, in this study, an attempt is made to use penetration-type Nano-coat as an alternative in order to evaluate its applicability through environmental resistance tests. METHODS : This study aimed to evaluate the applicability of penetration-type Nano-coat, which can provide water repellency to concrete, in concrete pavements, through various environmental resistance tests such as freezing and thawing resistance, chloride ion penetration resistance, and surface scaling resistance tests. The applicability of penetration-type Nano-coat was demonstrated based on the specification of KS F 2711, KS F 2456, and ASTM C 672. RESULTS :In the case of penetration-type Nano-coat applied on sound concrete, an increase in concrete durability was demonstrated by the negligible chloride ion penetrability and the absence of scaling, as revealed by visual observation of the surface, after 50 cycles of scaling resistance test. In addition, test result of the application of penetration-type Nano-coat on deteriorated concrete established that concrete surface pretreated by grinding provided improved durability than non-treated concrete. CONCLUSIONS :This study indicates that penetration-type Nano-coat is applicable as an effective alternative, to increase the durability of concrete structures. In addition, it was known that pretreatment of deteriorated concrete surface, such as grinding, is required to improve the long-term performance of concrete pavement.

• 한국건설순환자원학회논문집
• /
• 제8권2호
• /
• pp.190-197
• /
• 2020

본 연구에서는 페로니켈의 제련과정에서 발생하는 산업부산물인 페로니켈슬래그 미분말과 광물질혼화재료를 사용한 시멘트 경화체의 역학적 특성 및 내구성능을 평가하였다. 3성분계 시멘트 경화체의 수화열, 공극구조, 압축강도, 길이변화, 급속염화물 침투시험(RCPT), 동결융해 저항성을 평가하여 보통포틀랜드 시멘트와 비교하였다. 그 결과 페로니켈 슬래그 미분말 및 광물질 혼화재료를 사용한 3성분계 시멘트 경화체의 압축강도는 기준콘크리트에 비하여 낮은 강도발현을 하였으나, 알칼리 활성화제를 사용함에 따라 어느 정도 회복되는 것을 알 수 있었다. 페로니켈 슬래그를 사용한 시멘트 모르타르의 길이변화는 기준 시편보다 수축이 덜 발생하는 것으로 나타났다. 또한 페로니켈 슬래그 미분말을 사용한 경우 알칼리활성화제 사용유무에 관계없이 모두 ASTM C 1202에서 제시한 '매우 낮은' 영역의 값을 나타내었으며, 동결융해저항성 평가에서도 기준콘크리트에 비하여 아주 우수한 결과를 나타내었다.