• Journal of the Korean Chemical Society
• /
• v.23 no.6
• /
• pp.385-391
• /
• 1979

It was found that cupric ion selective electrode, which was prepared by mixing CuS and $Ag_2S$ with the ratio four to one and PVC, was hard and durable. The response potentials were reproducible and linear in the range from 1.0 ${\times}$ $10^{-1}M$ to 1.0 ${\times}$ $10^{-5}M$ copper (II) solution and its slope was 25.0 mV per decade concentration at $298^{\circ}K$, slightly different from Nernstian slope. The copper (II) indicating electrode was applied in precipitation titration of 1.0 ${\times}$ $10^{-2} M Cu(II)$ sample solution containing proper amounts $NaNO_3$ with 0.1 M NaOH standard solution. Also, this electrode could be used in complex titration of Zn(II), Mg(II), Ca(II) with EDTA and stability constant of EDTA complex of Ca(II) and Mg(II) was calculated by using known Cu-$EDTA^{2-}$ stability constant.

• Restorative Dentistry and Endodontics
• /
• v.27 no.6
• /
• pp.632-643
• /
• 2002

The purpose of this study was two-fold. First was to evaluate whether the molecular sieving model was appropriate for ionic dissociation experiment. Second was to compare the dissociation of calcium and hydroxyl ions from five types of calcium hydroxide pastes (Pure calcium hydroxide paste, DT temporary $dressing^{\circledR},{\;}Metapaste^{\circledR},{\;}Chidopex^{\circledR},{\;}Metapex^{\circledR}$) in three vehicles (aqueous, viscous and oily) and the antibacterial effect. Each calcium hydroxide pastes was placed into 0.65ml tube with cap and then 15% polyacrylamide gel was placed onto calcium hydroxide pastes. After the gel was hardened, the tubes were filled with tridistilled water (pH 7.14) and closed with cap. The tubes were stored in $37^{\circ}C$ 100% incubator The pH reading and the concentration of calcium ions were taken at 1, 4, 7. 10, and 14 days. The brain heart infusion agar plates with S. mutans and A. actinomycetemcomitans were used far antibacterial activity test. Middle of agar plate was filled with the calcium hydroxide pastes. The plates were incubated at $37^{\circ}C$ and observations were made to detect the zones of inhibition. These data were evaluated statistically by use of the analysis of variance and duncan test. The results were as follows. 1. In fresh mixing state, the pH of five types of calcium hydroxide pastes were measured between 12.5 and 12.8. 2. The pH was increased in all five types of calcium hydroxide pastes compared with control group. In 14 days, Pure calcium hydroxide paste (11.45) and DT temporary $dressing^{\circledR}$ (11.33) showed highest pH, followed by $Metapaste^{\circledR}$ (9.49), $Chidopex^{\circledR}$ (8.37) and $Metapex^{\circledR}$ (7.59) 3. Calcium was higher in all five types of calcium hydroxide pastes compared with control group. In 14 days, Pure calcium hydroxide paste (137.29 mg%) and DT temporary $dressing^{\circledR}$ (124.6 mg%) showed highest value, followed by $Metapaste^{\circledR}$ (116.74 mg%), $Chidopex^{\circledR}$ (111.84 mg%) and $Metapex^{\circledR}$ (60.22 mg%). 4. The zones of bacterial inhibition were seen around all five types of calcium hydroxide pastes. $Chidopex^{\circledR}{\;}and{\;}Metapex^{\circledR}$ groups which include iodoform were observed significantly larger zone of inhibition in A. actinomycetemcomitans compared with the other calcium hydroxide groups (p<0.05) However, $Metapex^{\circledR}$ showed the least antibacterial effect on S. mutans compared with other groups (p<0.05). The molecular sieving model was found to be acceptable in dissociation experiment of hydroxyl and calcium ions when compared with the previous tooth model study. But this model was not appropriate for the antibacterial test.

• Journal of Sericultural and Entomological Science
• /
• v.17 no.1
• /
• pp.1-26
• /
• 1975

These studies were attempted to find out the optimum silk reeling system by use of automatic silk reeling machine to increase raw silk yield and reeling efficiency with various silk reelable cocoons. The obtained results are as follows; 1. The mean silk reelability ratio(X)of the Korean cocoons during the last ten years was 61 per cent, beside 64.7 per cent in autumn cocoon and 57.3 per cent in spring cocoon. However, the ratio variation of autumn cocoons was larger than that of spring cocoons. 2. A positive correlation between cocoon filament breaks during its process and silk reelability levels was shown to be significant. The cocoons of both poor and good reelability evidenced "J" shape distribution on the filament break graph by the order of reeling cocoon end. Many bave breaks were found at the inner shell of the cocoons, or in case of poor reelability cocoons. 3. The morphology of broken cocoon ends during the process was classified into A, B, C, D, E and F types, The occurrence of B type was majority, but that of F type was minority among them. 4. In case of the cocoon cooking, H-type ion-exchanged soft water was better for good reelability cocoons, Na and H-type ion exchanged neutral soft water for those of fair reelability, and alkaline (Na-type) soft water for those of poor reelability, respectively. 5. The modification of cooking water by mixing the above different types of water (50％ Na-type and 50％ H-type passed by standard natural water; 75％ Na-type and 25％ H-type passed by hard natural water; 25％ Na-type and 75％ H-type passed by soluble natural water) made higher yield of raw silk with tess breaks of thread. 6, In case cocoon ends groping water included sodium hexametaphosphate as much as 800 ppm. the groping efficiency and raw silk yield of cocoon was improved. The effect was pronounced in case of poor reelability cordons. 7. The most reasonable cocoon cooking and silk reeling condition for automatic silk reeling process were observed to be rather incomplete cook with good reelability cocoons and optimum cook with poor reelability cocoons succeeded by the reeling bath temperature of 45$^{\circ}C$, 8. The reasonable silk reeling velocities were observed to be about 150m per min. for good reelability cocoons, 120m per min. for fair reelability ones and 90 to 120m per min. for poor reelability ones. 9. In order to improve the raw silk yield of cocoons and reeling efficiency, the cocoon stand-by-ratio for reeling should be kept at the level of 40 per cent for good reelability cocoons or at 60 per cent for poor reelability ones beside necessary end found cocoon condition.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.6
• /
• pp.268-273
• /
• 2014

$Y_2O_3$ ceramic specimens were fabricated from the granular powder, obtained by spray drying process from the slurry. The slurry was prepared by mixing PVA binder, NaOH for Ph control, PEG and $Y_2O_3$ powder. The $Y_2O_3$ specimen was shaped in size of ${\phi}14mm$ and then sintered at $1650^{\circ}C$. The characteristics, microstructure, densities and plasma resistance of the $Y_2O_3$ specimens were investigated with the function of forming pressure and sintering time. $Y_2O_3$ specimens were exposed under the $CHF_3/O_2/Ar$ plasma, the dry etching treatment of specimens was carried out by the physical reaction etching of $Ar^+$ ion beam and the chemical reaction etching of $F^-$ ion decomposed from $CHF_3$. With increasing sintering time, $Y_2O_3$ specimens showed relatively high density and strong resistance in plasma etching test.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.307-312
• /
• 2017

In this study, the electrochemical performance of surface modified carbon using the PFO (pyrolyzed fuel oil) was investigated by chemical activation with KOH and $K_2CO_3$. PFO was heat treated at $390{\sim}400^{\circ}C$ for 1~3h to prepared the pitch. Three carbon precursors (pitch) prepared by the thermal reaction were 3903 (at $390^{\circ}C$ for 3h), 4001(at $400^{\circ}C$ for 1h) and 4002 (at $400^{\circ}C$ for 2h). Also, the effect of chemical activation catalysts and mixing time on the development of porosity during carbonization was investigated. The prepared carbon was analyzed by BET and FE-SEM. It was shown that chemical activation with KOH could be successfully used to develop carbon with specific surface area ($3.12m^2/g$) and mean pore size (22 nm). The electrochemical characteristics of modified carbon as the anode were investigated by constant current charge/discharge, cyclic voltammetry and electrochemical impedance tests. The coin cell using pitch (4002) modified by KOH has better initial capacity (318 mAh/g) than that of other pitch coin cells. Also, this prepared carbon anode appeared a high initial efficiency of 80% and the retention rate capability of 2C/0.1 C was 92%. It is found that modified carbon anode showed improved cycling and rate capacity performance.

• Journal of the Korean Electrochemical Society
• /
• v.19 no.1
• /
• pp.21-27
• /
• 2016

Vanadium redox flow batteries (VRFBs) using the electrolytes containing various vanadium ions in sulfuric acid as supporting solution are one of the energy storage devices in alternatively charging and discharging operation modes. The positive electrolyte contains $V^{5+}/V^{4+}$ and the negative electrolyte $V^{2+}/V^{3+}$ depending on the operation mode. To prevent the mixing of two solutions, proton exchange membranes are mainly used in VRFBs. Nafion 117 could be the most promising candidate due to the strong oxidative property of $V^{5+}$ ion, but causes high crossover of electroactive species to result in a decrease in coulombic efficiency. In this study, the composite membranes using Nafion ionomer and porous polyethylene substrate were prepared to keep good chemical stability and to decrease the cost of membranes, and were compared to the properties and performance of the commercially available electrolyte membrane, Nafion 117. As a result, the water uptake and ionic conductivity of the composite membranes increased as the thickness of the composite membranes increased, but those of Nafion 117 slightly decreased. The permeability of vanadium ions for the composite membranes significantly decreased compared to that for Nafion 117. In a single cell test for the composite membranes, the voltage efficiency decreased and the coulombic efficiency increased, finally resulting in the similar energy efficiency. In conclusion, the less cost of the composite membranes by decreasing 6.4 wt.% of the amount of perfluorinated sulfonic acid polymer due to the introduction of porous substrate and lower vanadium ion permeability to decrease self-discharge were achieved than Nafion 117.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.9
• /
• pp.31-44
• /
• 2012

Seasonal changes in groundwater geochemistry exist in Ddan-sum island. In the farming season of April, the spatial distribution of ions explains that $Fe^{2+}$, Fe(total), $Mn^{2+}$, $Ca^{2+}$, $Mg^{2+}$, $SiO_2$, ${HCO_3}^-$, and ${NO_3}^-$ are high in the center of the island, but $Na^+$ and $K^+$ are relatively low and these high anions indicates the effect of fertilizer used for strawberry cultivation. Spatial variation of ion concentration is smaller in August than April because of low agricultural activity and heavy rainfall. Geochemical type of groundwater shows that the center of island has the characteristics of recharge zone but the rim area corresponds to a mixing zone between groundwater and stream water. According to the analysis of saturation index for Fe and Mn ions, hematite, goethite, and rhodochrosite under supersaturation have a possibility of additional mineral deposition, and siderite, $Fe(OH)_3$, manganite, pyrolusite, and pyrochroite under unsaturation may exist as a type of dissolved ion.

• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.199-208
• /
• 1994

In this study, the ultrasound which provides the properties of mixing, and surface cleaning effect, the increase of the effective reaction surface area and the enhancement of the effective collision frequency, was used to enhance the recovering efficiency of Cu from the Cu-ion containning waste water. The ultrasonic reactor used in this study was designed and constructed for improving the disadvantage of the existing ultrasonic reactor. From the experimental result and its analysis, we obtained following conclusions. 1. The ultrasound increased the rate of electrochemical deposition to 582.2% in maximum at the condition of $0.1M-CuSO_4$, and 2.1 V-overpotential. 2. The enhancement effect of ultrasound induced by the reduction of diffusion layer thickness was 277.8% in maximum and induced by the other effect except for the reduction effect of the diffusion layer thickness was 253.6% in maximum at $0.1M-CuSO_4$ and 2.1V overpotential. 3. This study gave the possibility of the scale-up of ultrasonic reactor and in particular, ultrasonic reactor would be effective in the treatment of waste water containning a low concentration of Cu ion.

• Magazine of the Korea Concrete Institute
• /
• v.7 no.5
• /
• pp.155-163
• /
• 1995

The primary purpose of this study is to hvestigate reusal techniques of high calclun-i fly ash in the construct.ion field, which may contribute to the savings of construction materials and consenratlng environment. Furt.hcrrnore, it can setup material properties or characteristics requiremi for development of new materials. Firstly, chemical and physical cahraci.eristics of liigh~calciurn fly ash is arialyseti. And then, the usability of the concrete is tcsted by investigating the flowablility and strength development through parameters of various replace ment r,itios with respect to different nuxing conditions. Finally, the durability and mechanical properties(e1astic nlodulus of the concrete is tested. As the result of the study, the following conclusions are derived : (1) the quaritii y of the CaO The primary purpose of this study is to hvestigate reusal techniques of high calclun-i fly ash in the co:lstruct.ion field, which may contribute to the savings of construction materials and consenratlng environment. Furt.hcrrnore, it can setup material properties or characteristics requiremi for development of new materials. Firstly, chemical and physical cahraci.eristics of liigh~calciurn fly ash is arialyseti. And then, the usability of the concrete is tcsted by investigating the flowablility and strength development through parameters of various replace ment r,itios with respect to different nuxing conditions. Finally, the durability and mechanical properties(e1astic nlodulus of the concrete is tested. As the result of the study, the following conclusions are derived : (1) the quaritii y of the CaO

• Clean Technology
• /
• v.27 no.3
• /
• pp.223-231
• /
• 2021

In order to address many issues associated with large volume changes of silicon, which has very low electrical conductivity but offers about 10 times higher theoretical capacity than graphite (Gr), a silicon nanoparticles/hollow carbon (SiNP/HC) composite having bimodal-mesopores was prepared using silica nanoparticles as a template. A control SiNP/C composite without a hollow structure was also prepared for comparison. The physico-chemical and electrochemical properties of SiNP/HC were analyzed by X-ray diffractometry, X-ray photoelectron spectroscopy, nitrogen adsorption/desorption measurements for surface area and pore size distribution, scanning electron microscopy, transmission electron microscopy, galvanostatic cycling, and cyclic voltammetry tests to compare them with those of the SiNP/C composite. The SiNP/HC composite showed significantly better cycle life and efficiency than the SiNP/C, with minimal increase in electrode thickness after long cycles. A hybrid composite, SiNP/HC@Gr, prepared by physical mixing of the SiNP/HC and Gr at a 50:50 weight ratio, exhibited even better cycle life and efficiency than the SiNP/HC at low capacity. Thus, silicon/carbon composites designed to have hollow spaces capable of accommodating volume expansion were found to be highly effective for long cycle life of silicon-based composites. However, further study is required to improve the low initial coulombic efficiency of SiNP/HC and SiNP/HC@Gr, which is possibly because of their high surface area causing excessive electrolyte decomposition for the formation of solid-electrolyte-interface layers.