• Journal of the korean Society of Automotive Engineers
• /
• v.12 no.3
• /
• pp.63-70
• /
• 1990

In a premixed flame stabilized by a streamlined step, the flame structure and combustion characteristics were investigated to identify the effect of the pressure pulsation in a combustion air. A flame stabilizing limits, visualization, mean temperature, ion current and gas concentration (O$_{2}$, CO$_{2}$, CO, UHC) were measured. With the combustion air of higher pressure pulsation, the development of the mixing layer was fast and wide, the temperature and combustion intensity were higher at arbitrary section. But, the effect was notably decreased with X=150 mm downstream. And a first eddy formation from step edge was earlier. Thus, with the combustion air of higher pressure pulsation, high rate of heat generation was expected.

• Journal of environmental and Sanitary engineering
• /
• v.15 no.1
• /
• pp.54-61
• /
• 2000

We studied the adsorption characteristics on the treatment process of heavy metal wastewater by using cuttle fish bones powder. When adding the 0.25% cuttle fish born powder in the heavy metal solution, $Fe^{3+}$ and $Pb^{2+}$ were high removed than other heavy metals as above 95%. In the solution which was adjusted to pH 5, 7 and 9, there was not observed the difference thing on the heavy metal removal rate. At test using plating wastewater treatment, adding 1%, 1.5% and 2% of the cuttle fish born powder, the heavy metal removal rate were as follows; Zn 12.5 - 37.5%, Mn 18.0 - 62.2%, Cd 36.8 -93.0%, Cu 51.4 - 97.4%, Cr 70.8 - 99.1%, Fe 87.2 - 99.3% and Pb 92.8 - 99.9%. When adding the 0.15% cuttle fish born powder and mixing for 20 minutes, the solution was happened the adsorption equability. Applied this results to the Freundlich＇s iso-thermal equation, we found the cuttle fish born＇s probability as a good adsorbent.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.549-554
• /
• 2001

It is possible for concrete using sea sand to contain chloride ion as well as cation such as Na$^{+}$and $K^{+}$ during mixing process. It is known that some cations such as Na$^{+}$and $K^{+}$ remain in pore solution without binding In this study, therefore, we intend to inspect the behavior of cations in cement paste as well as NaCl, CaCl$_2$ and KCI through analysis of pore solution extracted from cement paste with high pressure vessel. As a result, increase of alkali ions by adding sea sand and admixtures to the fresh concrete means use of the cement contained high alkali contents. In this case, alkali ions in pore solution can decrease durability of cement products causing alkali-aggregate reaction or accelerated carbonation. So it needs to be studied.studied.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.602-605
• /
• 2007

Soybean and rape seed are common feedstocks for biodiesel product ion in USA and Europe, respectively. On the other hand, South Eastern countries like Malaysia and Indonesia have surplus palm crops. However due to substantial amount of saturated fats in palm, the palm biodiesel has poor low temperature properties. To improve the low temperature flow properties as biodiesel, the dependence of the cold filter plugging point (CFPP) on the fatty acid compositions was examined. Two different kinds of biodiesels, palm and soybean biodiesels, were blended with the different volume ratios. And the low temperature flow properties of 0.5%, 1%, and 5% biodiesel in diesel blend fuels was tested. The decrease of CFPP was not observed for BD1 with Palm BD. Also, WDI test didn't exceed in the range of 4oC by the mixing of Palm BD upto 5% in commercial diesels.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.2
• /
• pp.193-198
• /
• 2001

Preparation of antibacterial biopolymer film which is suitable for food packaging film was investigated using K-carrageenan as a base material. K-Carrageenan showed good biodegradability and film-forming characteristic but poor mechanical properties under humid condition. Also, various bacteria grew well on its surface. The poor mechanical properties could be improved by mixing with alginate at a 1:1 ratio and crosslinking with $CaCl_2$ solution. Antibacterial property coul be provided by modifying the K-carrageenan film surface with acrylic acid plasma followed by ion-exchange with $Ag^+$ ions. Such prepared film still showed good biodegradability by various fongi.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.297-298
• /
• 2009

In this paper, it was to investigate different types of mortar properties using a chloride attack protection agent by evaluating mixing ratio of this particular agent, including 3% increments. The results showed that the compressive strength and chloride ion penetration resistance of mortar by using chloride attack protection agent were improved than non-added mortar.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.10
• /
• pp.14-23
• /
• 1997

An MMIC downconverting mixer for cellular phone application has been successfully developed using an MMIC process including $1 \mu\textrm{m}$ ion implanted gaAs MESFET and passive lumped elements consisting of spiral inductor, $Si_3N_4$ MIM capacitor and NiCr resistor. The configuration of the mixer presented in this paper is single-ended dual-gate FET mixer with common-source self-bias circuits for single power supply operation. The dimension of the fabricated circuit is $1.4 mm \times 1.03 mm $ including all input matching circuits and a mixing circuit. The conversion gian and noise figure of the mixer at LO powr of 0 dBm are 5.5dB and 19dB, respectively. The two-tone IM3 characteristics are also measured, showing -60dBc at RF power of -30dBm. Allisolations between each port show better than 20dB.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.199-200
• /
• 2010

This paper was estimated the diffusion coefficient through the chlorine ion diffusion coefficient of the high fluidity concrete using the limestone powder. Also, the micro void of high fluidity concrete examined according to the mixing ratio of the limestone powder by the mercury intrusion porosimetry.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.9
• /
• pp.1381-1387
• /
• 1989

For the fabrication of ohmic contact to p-type GaAs, In Liquid Metal Ions were implanted into p-type GaAs (Zn:1.5x10**19/cm**3). After the samples were processed by Infrared rapid thermal annealing (IRTA0 or Furance Annealing (FA), I-V and specific contact contact resistivity were measured. Specific contact resistivity was found to be 1.7x10**-5 \ulcorner-cm\ulcornerin IRTA 750\ulcorner, 10 sec annealed sample. The surface characteristics of the samples were investigated with SEM, RHEED, AES. From these results we can know that implanted In ions were formed mixing layer of InAs at the surface.

• Journal of the Korean Vacuum Society
• /
• v.2 no.1
• /
• pp.41-49
• /
• 1993

두 층으로 이루어진 박막에서 이온선 혼합에 의해 형성되는 결정상 및 비정질상을 예측할 수 있는 새로운 모델을 제시하였다. 기존의 예측 모델과는 달리, 이온선 혼합 공정에서의 확산메카니즘에 영향을 미치는 변수로서 각 원소의 응집에너지와 침입형자리 크기 그리고, 이온반경을 이용하였다. 비정질상 형상 여부를 결정하는 인자로서 ADF(amorphization determinating factor)를 새로 정의하여 다음과 같이 모델식을 세웠다. 즉, ADF=C1(RB-rA)＋C2(Ecoh, max/Ecoh, min)＋$\alpha$이다. ADF가 양의 갓을 갖는 계는 이온선 혼합에 의해 비정질상이 형성되며 ADF가 음의 값을 갖는 계는 비정질상이 형성되지 않는다. 70여 가지의 금속/금속 및 금속/실리콘계에 대한 실험결과로부터 본 모델을 검증하였으며 아직까지 실험결과가 부족한 몇 가지 금속/실리콘계에 대해서 본 모델을 이용하여 비정질상 형성 여부를 예측하였다.