• Polymer(Korea)
• /
• v.29 no.1
• /
• pp.74-80
• /
• 2005

To use the filter materials for reduction of carbonyl compounds in cigarette mainstream smoke, the bead type cation and anion exchangers were synthesized by the suspension polymerization of GMA and DVB followed by the subsequent functionalization with sodium sulfite and diethylamine, respectively. FT-IR/ATR was used to characterize functionalized copolymer formation by sulfonation and amination, and the morphology change of ion exchangers according to the adsorption of cigarette mainstream smoke were observed by SEM. Ion exchange capacity, functionalization yield and adsorption properties of carbonyl compounds in cigarette mainstream smoke were investigated. The highest functionalization yields and ion exchange capacity were obtained at 5 wt% DVB content in co-monomer. The adsorption amount of carbonyl compounds in cigarette mainstream smoke of anion exchanger was higher than that of cation exchanger because of its electron delocalization in carbonyl group. The adsorption efficiency was increased in the presence of moisture. This results indicated that the anion exchanger was applicable for cigarette filter material because of its large ion exchange capacity and rapid ion exchange reaction.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.7
• /
• pp.2041-2043
• /
• 2013

A layered perovskite of Dion-Jacobson phase, $RbLaTa_2O_7$, was successfully exfoliated into colloidal suspension via successive ion-exchange and intercalation reaction. The pristine perovskite $RbLaTa_2O_7$ was synthesized by conventional solid-state reaction, and then, it was ion-exchanged with hydrochloric acid to obtain a protonic form of perovskite. The resulting proton-exchanged perovskite was reacted with ethylamine to increase interlayer spaces for further intercalation reaction. Finally, the ethylamine-intercalated form was exfoliated into nanosheets via an intercalation of bulky organic cations (tetrabutylammonium). According to X-ray diffraction (XRD) analysis, the TBA-intercalated form showed remarkably increased interlayer spacing (${\Delta}d$ = 1.67 nm) in comparison with that of the pristine material. Transmission electron microscopic image of exfoliated perovskite clearly revealed that the present exfoliated perovskite were composed of very thin layers. This exfoliated perovskite nanosheets could be applicable as building blocks for fabricating functional nanocomposites.

• Applied Chemistry for Engineering
• /
• v.20 no.4
• /
• pp.453-458
• /
• 2009

Iron-containing TNU-9 zeolites were prepared by aqueous ion exchange in the range of Fe contents 0.6~3.3 wt%. Direct decomposition of $N_2O$ was performed varying $N_2O$ concentrations and reaction temperatures. Fe-TNU-9 zeolites used were characterized using XRD, $N_2$ sorption, SEM/EDX. A 2.7 wt% Fe-TNU-9 zeolite showed high activities and above this contents of Fe the effect of catalytic activity was little dominated. Fe-TNU-9 zeolites after ion exchange conserved their TNU-9 structure although the degree of crystallinity was decreased until ca. 60% in 3.1 wt% Fe-TNU-9 zeolite after ion exchange in 0.01 M Fe solution. The decrease in the degree of crystallinity could be correlated with the decrease of surface area and pore volume. The partial reaction order of $N_2O$ in the decomposition of $N_2O$ was dependent on the reaction temperature from 0.69 at $420^{\circ}C$ to 0.97 at $494^{\circ}C$. The activation energy of $N_2O$ was also dependent on the $N_2O$ concentration and its value is ranged to 34~43 kcal/mol.

• Applied Chemistry for Engineering
• /
• v.24 no.3
• /
• pp.247-252
• /
• 2013

Sulfonated poly(ether ether ketone) (SPEEK) with a certain degree of sulfonation were synthesized by reacting PEEK and sulfuric acid at different reaction time. Then ion-selective composite carbon electrodes (ISCCE) were fabricated by coating the prepared SPEEK on the surface of carbon electrodes. The specific capacitance and resistance of the ISCCE were analyzed by electrical impedance spectroscopy. The ion exchange capacities (IEC) of the SPEEKs were measured in the range of 1.60~2.57 meq/g depending on the sulfonation time. The SPEEK more than 2.5 meq/g of IEC was considered unsuitable for fabricating the ISCCE because it was dissolved in water. The specific capacitance of the prepared ISCCE increased with increasing the IEC of coated SPEEKs and the capacitance was improved up to about 20% compared to that of uncoated carbon electrode. In addition, the electrical resistance of coating layer decreased significantly with increasing the IEC of coated SPEEKs. It is expected that the desalination efficiency of conventional capacitive deionization process can be improved by using the prepared ISCCE coated with SPEEK.

• Korean Journal of Materials Research
• /
• v.12 no.11
• /
• pp.860-864
• /
• 2002

$Li^{+}$ extraction reactions with ion-exchange type lithium manganese oxide in an aqueous phase were examined using chemical and x-ray diffraction (XRD) analysis. In the process of extraction reaction, the lithium manganese oxide showed a topotactic extraction of $Li^{+ }$ in the aqueous phase mainly through an ion-exchange mechanism, and the $Li^{+}$ extracted samples indicated a high selectivity and a large capacity for $Li^{+}$ . The electronic structures and chemical bonding properties were also studied using a discrete variational (DV)-X$\alpha$ molecular orbital method with cluster model of (Li$Mn_{12}$ $O_{40}$ )$^{27-}$ for tetrahedral sites and ($Li_{7}$ Mn $O_{38}$ )$^{3}$ for octahedral site in $Li_{1.33}$ $Mn_{1.67}$ / $O_{4}$ respectively. Li in the manganese oxides is highly ionized in both sites, but the net charge of Li was greater for tetrahedral sites than octahedral. These calculations suggest that the tetrahedral sites have higher $Li^{+}$ $H^{+}$ exchangeability than the octahedral sites, and are preferable for the selective adsorption for L $i^{+}$ ions.s.

• Journal of Korean Society on Water Environment
• /
• v.23 no.5
• /
• pp.600-606
• /
• 2007

Livestock wastewater containing concentrated organic matters and nutrients has been known as one of the major pollutants. It is difficult to apply the conventional activated sludge process to treat livestock wastewater because of high Non-biodegradable (NBD) matter and ammonia. The objectives of this study are to remove NBD matters including aromatic compounds and ammonia in livestock wastewater using Coagulation-Fenton oxidation-Zeolite (CFZ) processes and ascertain applicable feasibility in the field through pilot plant experiment. NBD matters and color remained in the treated water were removed over 92% by Fenton oxidation as the second treatment process. Ammonia was removed by over 99.5% in the zeolite ion exchange process as the last treatment method. From $UV_{254}$, $E_2/E_3$ ratio and GC/MS analyses of treated water at each process, the aromatic compound was converted to aliphatic and aromaticity was decreased. In pilot scale test, organics and ammonia removal efficiencies were not much different from the result of lab-scale test at various operation conditions. Furthermore, reaction time and dosage of Fenton reagent in pilot scale experiment reduced by 40 min and 50% rather than in lab-scale test. $BOD_5$, $COD_{Mn}$, SS, T-N and T-P of treated water in the pilot-scale experiment also met the effluent standards.

• Journal of the Korean Chemical Society
• /
• v.25 no.3
• /
• pp.160-165
• /
• 1981

Radical copolymerization of the complexed 2-vinylpyridine with vinyl acetate and divinylbenzene initiated by azobisisobutyronitrile was carried out in N, N-dimethylformamide in presence of barium chloride at $98{\circ}C$. In the preparation of 2-vinylpyridine-vinylacetate-divinylbenzene terpolymer, the optimum reaction conditions were studied by means of various temperatures and times. 2-vinylpyridine-vinylalcohol-divinybenzene resin was prepared by transesterificating 2-vinylpyridine-vinylacetate-divinylbenzene terpolymer with a 1% methanolic sodium hydroxide solution. 2-Vinylpyridine-vinylphosphate-divinyldenzene was prepared by phosphorylating 2-vinylpyridine-vinylalcohol-divinylbenzene resin with phosphoric acid and urea. The compositions of each synthetic resin were identified by means of infrared absorption spectroscopy. The ion exchange capacities of each 2-vinylpyridine-vinylalcohol-divinylbenzene and 2-vinylpyridine-vinylphosphate-divinylbenzene terpolymer was 3.69 meq/g and 5.38 meq/g.

• Polymer(Korea)
• /
• v.26 no.4
• /
• pp.415-421
• /
• 2002

A sulfonated PP-g-styrene ion-exchange hollow fiber membrane was prepared by pre-irradiation method with E-beam followed by sulfonation reaction. Degree of grafting increased with the increase of styrene monomer concentration and showed the maximum value of 128% at 80% of styrene monomer composition. Sulfonation yield increased with the degree of grafting. At 100% degree of grafting, sulfonation yield showed the maximum value of 13.4%. Ion exchange capacity of sulfonated HPP-g-styrene of 3.42 meq/g was attained, resulting in the remarkable increase of adsorption ability BET analysis proved that the surface area of sulfonated HPP-g-styrene was 62.54 $m^2/g$ and the mean pore size was 25 $\AA$. From the BSA adsorption experiments, the adsorption amount of BSA was increased with sulfonation. At 13.4% sulfonation yield the adsorption amount of BSA was maximum as 3.8 mg/g. Sulfonated HPP-g-styrene was synthesized successfully and suitable for the adsorption and separation of BSA.

• Clean Technology
• /
• v.13 no.2
• /
• pp.104-108
• /
• 2007

Biodiesel is a fatty acid alkyl ester produced by chemical reaction of a vegetable oil or animal fat and an alcohol. It is getting attention as a clean alternative energy that can replace gas oils. In this study, strong acidic ion exchange resin was introduced in the pretreatment process of the used cooking oil and rapeseed oil to enhance the conversion of the oil to the biodiesel by removing FFA(free fatty acid). More than 90% FFA was removed. Dry resins showed higher FFA removal efficiency than wet resins. Using transesterification the conversion of triglyceride into fatty acid methyl ester was raised up to 98%. These results can be applicable to the pretreatment of biodiesel feedstocks having high acidic value.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.628-632
• /
• 2011

L-ribose has recently attracted interest as a starting material for antiviral drug. It could be obtained from L-arabinose by epimerization reaction. Epimerization reaction was carried out with molybdenium oxide or molybdic acid catalyst and methanol/water solution. Reaction temperature, methanol percentage, and catalyst kind were selected to find an optimum reaction condition. Ion exhange chromatography was used for separating epimerization reaction mixture, and then HPLC chromatogram of L-ribose fraction obtained to calculate the yield of the reaction. Shodex ion exchange HPLC column(Model SC1011) and Phenomenex Luna $NH_2$ HPLC column were compared to employ a convenient HPLC analysis. It was found that the usage of 20% methanol, $60^{\circ}C$, and 40 g/L molybdic acid gives the best reaction condition with a yield of 21%.