통합 검색 | Korea Science

정원희;정강원;임연찬;오현주;박철우;최은하;서윤호;김윤기;강승언
- 한국진공학회지
- /
- 제15권3호
- /
- pp.259-265
- /
- 2006
[ $RF-O_2$ ] plasma 처리한 MgO 박막의 스퍼터링 수율을 집속이온빔 장치를 이용하여 측정하였다. 가속 전압 10 kV의 Ga 이온빔을 주사했을 때 plasma 처리하지 않은 MgO 박막의 스퍼터링 수율은 0.33 atoms/ion, $RF-O_2$ plasma 처리한 MgO 박막의 스퍼터링 수율은 0.20 atoms/ion 으로 $RF-O_2$ plasma 처리한 경우 스퍼터링 수율이 낮아졌다. 또한 XPS, AFM을 통해 plasma 처리로 인한 MgO 표면의 변화를 관찰하였다. MgO 박막에 $RF-O_2$ plasma 처리한 후 XPS O 1s spectra의 binding energy와 FWHM 값이 각각 2.36 eV와 0.6167 eV 작아졌고 표면거칠기의 RMS 값 또한 0 32 nm 작아졌다.
PDF KSCI

Lee, Nae-Eung
- Journal of Korean Vacuum Science & Technology
- /
- 제3권2호
- /
- pp.139-144
- /
- 1999
Hydrogen concentration depth profiles in homoepitaxial Si(001) films grown from hyper-thermal Si beams generated by ultrahigh vacuum (UHV) ion-beam sputtering have been measured by nuclear reaction analyses as a function of film growth temperature and deposition rate. Bulk H concentrations CH in the crystalline Si layers were found tio be below detection limits, 1${\times}$1019cm-3, with no indication of significant H surface segregation at the crystalline/amorphous interface region. This is quite different than the case for growth by molecular-beam epitaxy (MBE) where strong surface segregation was observed for similar deposition conditions with average CH values of 1${\times}$1020cm-3 in the amorphous overlayer. The markedly decreased H concentrations in the present experiments are due primarily to hydrogen desorption by incident hyperthermal Si atoms. Reduced H surface coverages during growth combined with collisionally-induced filling of interisland trenches and enhanced interlayer mass transport provide an increase in critical epitaxial thicknesses by up to an order of magnitude over previous MBE results.
PDF

백승엽;장성민
- 한국정밀공학회지
- /
- 제31권3호
- /
- pp.207-213
- /
- 2014
A study was carried out to fabricate the cutting tool geometry with micro/nanoscale on the single crystal diamond tool by using the FIB. The FIB technique is an ideal tool for TEM sample preparation that allows for the fabrication of electron-transparent foils. The FIB is appropriate techniques to sample and subsequently define the chemical composition and the structural state of mineral inclusion on the micro/nanoscale. The combination of FIB with a SEM allows for 3D information to be obtained from samples including 3D imaging. Cutting strategies were demonstrated to improve the performance of cutting tool geometry and to generate high aspect ratio micro cutting tool. A finely focused beam of 30keV Ga+ ions was used to mill cutting tool shapes for various micro patterns. Therefore FIB sputtering is used to shape a variety of cutting tools with dimensions in the $1-5{\mu}m$ range and cutting edge radii of curvature of under 50nm.
https://doi.org/10.7736/KSPE.2014.31.3.207 인용 PDF KSCI