• Journal of IKEEE
• /
• v.7 no.2 s.13
• /
• pp.223-229
• /
• 2003

In this thesis, the characteristics of an inverted-F antenna for the 2.4GHz and 5.8GHz zwirless local area network(WLAN) have been analysed in terms of the variation of design parameters. The antenna can be integrated on WLAN for notebook printed circuit board, and the characteristics in terms of the variation of the gap between feed line and shorting stub, gap between antenna's leg and ground plane, antenna leg's width, substrate's height and dielectric constant are analysed. By using these characterization plot of design parameter, the tuning techniques are proposed to design optimum antenna. The designed antenna has 170MHz, 500MHz frequency bandwidth ,VSWR is 1.6, 1.14 and 3.5dBi gain.

• Journal of electromagnetic engineering and science
• /
• v.13 no.1
• /
• pp.28-33
• /
• 2013

This paper proposes a miniaturized high-isolation diversity antenna for wearable wireless body area network (WBAN) applications. An inverted-F type radiating element is used to reduce the overall dimension of the proposed antenna to $30mm{\times}30mm{\times}2.5mm$. The antenna performance on the human body phantom is analyzed through simulation and the performance of the fabricated antenna is verified by comparing the measured data with that of the simulation when the antenna is placed on a semi-solid flat phantom with equivalent electrical properties of a human body. The fabricated antenna has a 10 dB return loss bandwidth over the Industrial Scientific Medical (ISM) band from 2.35 GHz to 2.71 GHz and isolation is higher than 28 dB at 2.45 GHz. The measured peak gain of antenna elements # 1 and # 2 is -0.43 dBi and -0.54 dBi, respectively. Performance parameters are analyzed, including envelope correlation coefficient (ECC), mean effective gain (MEG), and the MEG ratio. In addition, the specific absorption ratio (SAR) distributions of the proposed antenna are measured for consideration in use.

• Journal of Advanced Navigation Technology
• /
• v.15 no.2
• /
• pp.197-203
• /
• 2011

A triple-band antenna which can be used at GSM900, PCS1900 and Bluetooth(or Wi-Fi) frequency band is proposed. The proposed antenna is designed based upon switching between IFA(Inverted F Antenna) that has a resonant length of ${\lambda}/4$ and loop antenna that has a resonant length of ${\lambda}/2$. It can be applied to triple-band only by use of single printed pattern due to the switching characteristic. It is designed by use of the IFA for the application to the GSM900, while it is designed by use of the loop antenna for the application to the PCS1900 and by use of additional pattern of IFA for the application to the Bluetooth(or Wi-Fi) respectively. As a result, it has been observed that the proposed antenna satisfies the required return loss(${\leq}10dB$) and also has efficiency(${\geq}80%$) over the whole band. Moreover the proposed antenna has omni-directional radiation pattern which is suitable to apply to the mobile phone.

• 한국ITS학회:학술대회논문집
• /
• 2010.05a
• /
• pp.98-101
• /
• 2010

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.1 s.9
• /
• pp.65-70
• /
• 2006

A UHF band RFID passive tag antenna, which can be attached on metallic objects, is proposed. The proposed tag antenna is more insensitive to the size of the metallic object than conventional PIFAs or IFAs. It is constructed on a multi-layer and its size is reduced by using a 'L' slit. Performances of the antenna is analyzed by Ansoft's HFSS and measured using a back-scattering method. The simulated and measured data are obtained with varying the size of metallic object.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.627-633
• /
• 2000

In this paper, new printed-type inverted F antenna is designed and fabricated to gain the ideal radiation pattern of a rocket-borne antenna which is expected to show the omni-directional pattern characteristic in rear direction. The radiation pattern of this antenna is measured in condition that the antenna is mounted on the side of the fin which is located on the tail of a rocket or a missile. Measurement result shows that the improved symmetrical radiation pattern is obtained with respect to the radiation pattern of the existing inverted F antenna. Besides parasite element which can be operated as reflector is attached in front of the antenna with the distance between the antenna and the parasite element $\lambda$/8. The result shows that the ratio of the front to the rear radiation level is improved by 8 dB.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.100-103
• /
• 2003

In this paper, the characteristics of an inverted-F antenna for the 2.4GHz local wireless communication system have been analysed in terms of the variation of design parameters. The antenna can be integrated on printed circuit board, and the characteristics in terms of the variation of the gap between feed line and shorting stub, gap between antenna's leg and ground plane, antenna leg's width, substrate's height and dielectric constant are analysed. By using these characterization plot of design parameter, the tuning techniques are proposed to design optimum antenna. The designed antenna has 6.4% frequency bandwidth for VSWR under 1.5 and 3dB gain.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.6
• /
• pp.1103-1108
• /
• 2003

In this paper, the characteristics of an inverted-F antenna for the 2.4GHz local wireless communication system have been analysed in terms of the variation of design parameters. The antenna can be integrated on printed circuit board, and the characteristics in terms of the variation of the gap between feed line and shorting stub, gap between antenna's leg and ground plane, antenna leg's width, substrate's height and dielectric constant are analysed. By using these characterization plot of design parameter, the tuning techniques are proposed to design optimum antenna. The designed antenna has 6.4 % frequency bandwidth for VSWR under 1.5 and 3dB gain.

• Journal of Navigation and Port Research
• /
• v.28 no.1
• /
• pp.31-36
• /
• 2004

In this paper, the characteristics of an inverted-F antenna for the 2.4GHz(ISM) Bluetooth system have been analysed in terms of the variation of design parameters. The antenna can be integrated on printed circuit board, and the characteristics in terms of the variation of the gap between feed line and shorting stub, gap between antenna's leg and ground plane, antenna leg's width, substrate's height and dielectric constant are analysed By using these characterization plot of design parameter, the tuning techniques are proposed to design optimum antenna. The designed antenna has 6.3%(150MHz) frequency bandwidth for VSWR under 1.5, and 3dBi gain.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.4
• /
• pp.80-85
• /
• 2012

In this paper, a new planar folded UHF band RFID reader antenna is suggested. For the antenna suggested in this paper, 4 PIFA (Planar Inverted F Antenna) micro-strip structures are adopted. The size is $50mm{\times}50mm{\times}6.2mm$. The gain of the antenna is 1.1 dBi, the VSWR is 1.2:1, and the efficiency is 63.3 %. The radiation pattern is designed as upper direction. Identification distance for the RFID tags is improved by minimizing hand effects with properly integrating 4 PIFAs.