• Environmental and Resource Economics Review
• /
• v.28 no.4
• /
• pp.497-526
• /
• 2019

The importance of "decoupling" to maintain economic growth and reduce greenhouse gases is emerging as the world has been mandated to reduce greenhouse gases since the 2015 Paris Agreement. This study covered 63 countries from 1980 to 2014 and analyzed the main characteristics and causes of decoupling phenomenon between economic growth and carbon emissions. In this study, the degree of decoupling was measured every five years. The analysis found that the decoupling rate of OECD countries and countries with large incomes was high, and that the decoupling phenomenon has accelerated worldwide since the 2000s. However, the degree of decoupling was different depending on the national characteristics. According to the results of dynamic panel model, the growth rate of manufacturing and the proportion of exports hampered decoupling, while the proportion of human capital and renewable energy had a positive effect on decoupling. Also income had a inverse U-shape non-linear effect on decoupling.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.6
• /
• pp.52-62
• /
• 1999

This paper presents a system which recognizes dynamic hand gestures on-line for controlling motion of numan avatar in virtual environment(VF). A dynamic hand gesture is a method of communication between a computer and a human being who uses gestures, especially both hands and fingers. A human avatar consists of 32 degree of freedom(DOF) for natural motion in VE and navigates by 8 pre-defined dynamic hand gestures. Inverse kinematics and dynamic kinematics are applied for real-time motion control of human avatar. In this paper, we apply a fuzzy min-max neural network and feature analysis method using fuzzy logic for on-line dynamic hand gesture recognition.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.724-731
• /
• 2018

Code obfuscation is a technology that makes programs difficult to understand for the purpose of interpreting programs or preventing forgery or tampering. Inverse reading is a technology that analyzes the meaning of origin through reverse engineering technology by receiving obfuscated programs as input. This paper is an analysis of obfuscation and reverse-toxicization technologies for binary code in a virtualized-based environment. Based on VMAttack, a detailed analysis of static code analysis, dynamic code analysis, and optimization techniques were analyzed specifically for obfuscation and reverse-dipidization techniques before obfuscating and reverse-dipulation techniques. Through this thesis, we expect to be able to carry out various research on virtualization and obfuscation. In particular, it is expected that research from stack-based virtual machines can be attempted by adding capabilities to enable them to run on register-based virtual machines.

• The Journal of Fisheries Business Administration
• /
• v.40 no.1
• /
• pp.133-152
• /
• 2009

The purpose of this paper is to model price formation and analyze demand structures for fishes under the restriction of Korean fisheries regulations. This study suggests the model that the price of fish is formed by its quantity, expenditure, and habit persistence. In economic literature, such a fishery market demand is called the inverse demand with dynamic habit persistence. Based upon a static differential price formation model, the paper has generalized it dynamically incorporating habit persistence effects. The empirical results show that all the species have values less than one and (-) sign of price flexibilities, thus being price inflexible. The estimated habit adjustment coefficients are significant at the level of 1%. Especially, TAC species have the smaller values of them than those of other main fish species. The contribution and results are summarized as follows. First, the fishery market demand has a strong dynamic effects from habit persistence. Second, the fishery market demand structure could be analyzed in a way different from the ordinary demand analysis, which is based upon price flexibility, scale flexibility, and cross adjustment flexibility. Third, the limitation of this paper is that it ignores the increasing stock effects by catching restrictions, thus raising consumers' benefit in the future.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.11
• /
• pp.2033-2048
• /
• 1992

This paper presents the theoretical development and qualitative evaluation of a new concept in the mathematical modeling of dynamic structures. We use both test data and analytical approximations to identify the parameters of an incomplete model. The model has the capability of predicting the response of the points of interest on the structure over the frequency range of interest and can be used to predict the changes in natural frequencies and normal modes due to structural changes. The theory was tested by running simulated tests on a relatively simple structure, identifying the parameters of the incomplete model, and using this model to predict the effects on frequency and mode shapes of several mass and stiffness changes. The conditions of the tests were varied by selecting different numbers of points of measurement, varying the frequency range, and by including assumed measurement error. It is recommended that the theoretical development be continued and that applications to more complex structures be carried out in order to develop a better understanding of the limitations and capabilities of the method. A successful, more definitive sevaluation could lead to immediate practical applications.

• Journal of Mechanical Science and Technology
• /
• v.18 no.2
• /
• pp.211-220
• /
• 2004

It is well known that the geometry of the articular surface has a major role in determining the position of articular contact and the lines of action for the contact forces. The contact force calculation of the knee joint under the effect of sliding and rolling is one of the most challenging issues in this field. We present a 3-D human knee joint model including sliding and rolling motions and major ligaments to calculate the lateral and medial condyle contact forces from the recovered total internal reaction force using inverse dynamic contact modeling and the Least-Square method. As results, it is believed that the patella, muscles and tendon affect a lot for the internal reaction forces at the initial heel contact stage. With increasing flexion angles during gait, the decreasing contact area is progressively shifted to the posterior direction on the tibia plateau. In addition, the medial side contact force is larger than the lateral side contact force in the knee joint during normal human walking. The total internal forces of the knee joint are reasonable compared to previous studies.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.5
• /
• pp.169-175
• /
• 2013

CRDi technology of diesel engine was developed from in the early 2000s due to a need to increase fuel efficiency and environment care. Especially, high-pressure fuel injection system in CRDi system which has a fuel injection unit including an injector, a fuel pump and common-rail, etc. becomes possible to make the exhaust gas clean as well as power improvement. In this study, comparison of dynamic characteristics of servo-hydraulic piezo-driven injector with 3-way and bypass-circuit type was analyzed by using the AMESim code. As results of this study, it found the bypass-circuit inside servo-hydraulic piezo injector can cause a faster injection response than that of the 3-way type. Also it was shown that bypass-circuit type had better control capability due to hydraulic bypass system.

• Journal of Korean Society of Transportation
• /
• v.17 no.3
• /
• pp.47-60
• /
• 1999

In this study, the dynamic route choice behavior of driver is assumed to be affected by the current conditions of traffic environments as well as the Past traffic environments and activities. The repeated survey of multi-timed to owner drove in Chon-ju city by the virtual traffic information system was performed by the stated preference method. And the LISREL(An analysis of linear structural relationship) model was used. As the results. the variable Parameter and t-value of travel time information on applied model was high and their results have an effect greatly to the route choice. After all, the route choice was negative from Kirin-ro, which Penetrates the downtown, and positive from Chunbyun-ro which was a roundabout way was confirmed. Estimated result of the reasonability, the highest suitable model was ode which applied the concept of serial correlation and stated dependence and was shown applying rightfulness to dynamic model. As the serial correlation and stated dependence parameter value, when time interval was large, parameter value was small and the serial correlation and stated dependence was in inverse proportion ratio to the time interval.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.1
• /
• pp.89-95
• /
• 2009

The purpose of the present study was to evaluate the safety under extreme environmental conditions and the dynamic safety under service environment conditions, of oceanographic buoy mooring systems consisting of a variety of materials, including chain, wire rope, nylon rope, and polypropylene rope. For the static safety assessment of a mooring system, after the calculation of external forces and the division of a mooring system into finite elements, the numerical integral was conducted to yield the elemental static tension until satisfying the geometrical convergence condition. To evaluate the dynamic safety, various processes were considered, including data collection about the anticipated areas for mooring, a determination of the parameters for the interpretation, the interpretation of the dynamic characteristics based on an analytic equation that takes into account the heave motion effect of a buoy hull and a mooring system, and a fatigue analysis of the linear cumulative damage. Based on the analysis results, a supplementary proposal for a wire rope that has a fracture in an actual mooring area was established.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.33-34
• /
• 2006

In this study, a prototype piezo-driven Injector. as a new method driven by piezoelectric energy, has been designed and fabricated based on the concept of inverse piezo-electric effect to overcome the major drawbacks of conventional solenoid-driven injector with a fixed and slow control of injection rate. The effects of an electric control between the solenoid valve and piezo-ceramic stack for injector needle's driving on the dynamic characteristics were usually investigated. We found that this piezo-electric actuator has the main advantage to drastically reducing the time of injector nozzle opening, as well to exert higher force output levels.