• 제어로봇시스템학회논문지
• /
• 제4권6호
• /
• pp.780-785
• /
• 1998

In this paper, it is shown that the conventional methods for dealing with the singularity problem of a manipulator can be generalized as a local minimization problem with differently weighted objective functions. A new damping method proposed in this article automatically determines the damping amounts for singular values, which are inversely proportional to the magnitude of the singular values. Furthermore, this can be done without explicitly computing the singular values. The proposed method can be applied to all the manipulators with revolute joints.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.953-958
• /
• 1992

This paper deals with the solution of inverse kinematics of the industrial FANUC robot with IBM PC386. The inverse kinematics of FANUC robot cannot be solved by the algebraical method, because arm matirix T$_{6}$ is very complex and 6-joint angles are associated with the position and the approach of end-effector. Instead we fuund otehr 5-joint angle by and algebraical method after finding .THETA.$_{1}$ value by a numerical method.d.

• 제어로봇시스템학회논문지
• /
• 제6권12호
• /
• pp.1093-1098
• /
• 2000

This paper presents an efficient algorithm for including the kinematic calibration data into the motion controller to improve the positioning accuracy of the manipulators. Rather than spending several iterations for finding the inverse solution of the calibrated kinematics, our approach requires only the nominal inverse solution and the calibrated forward kinematics for providing a better position command promptly. Thus, real-time application is guaranteed whenever the manipulators nominal inverse solution can be expressed in a closed form. Experimental results show that the line tracking performances can be remarkably improved by employing our algorithm.

• Journal of Welding and Joining
• /
• 제27권6호
• /
• pp.55-61
• /
• 2009

This study aims for determination of cutting work envelope of an articular robot for H-beam cutting. The robot has its own work envelope. The cutting of piece with groove requires the specific position of the torch which contracts the work envelope. This study suggested the new method to determine the cutting work envelope for this case. The method simplified the problem by use of the combination of inverse kinematics and forward kinematics. The method was used for cutting the H-beam with groove. The cutting work envelope was determined easily. The result was verified by 3D simulation system which implements the articular robot with 6 axes and the H-beam in the virtual shop.

• International journal of advanced smart convergence
• /
• 제10권3호
• /
• pp.149-156
• /
• 2021

Today, 3D softwares have become an essential tool in all areas of Video, including Movies, Animations, CFs, Motion Graphics and Games. One of the most commonly used fields is the 3D character video part. However, these 3D character animations and motion graphics softwares are difficult to learn and too much to learn, making it difficult to learn them all in a university education with a limited time of four years. In this paper, many Inverse kinematics tools, which are essential in the 3D character animations and motion graphics field, compare and analyze the strengths and weaknesses of each tool, focusing on Bone, Character Studio, and Character Animation Toolkit, which are most commonly used in work fields. And use Delphi techniques for 3D experts to secure objectivity. Therefore, for universities that require large amounts of teaching in a limited time, I propose an analysis of which of the above three Inverse Kinetics tools is advantageous for students to select and focus on for efficient education.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.519-523
• /
• 2011

오늘날 영화, 애니메이션, CF, 모션 그래픽, 게임 등 모든 영상 분야의 필수 tool로 3D 소프트웨어들이 자리 잡게 된 가장 큰 이유는, 각종 영상물을 제작하는데 있어서 여타 전통적인 방법(미니어처, 매트 페인팅, 실제 엑스트라 인원 동원 등)에 비해 적은 가격으로 훨씬 더 뛰어난 효과를 낼 수 있고, 시간 절약 및 공간의 제약을 받지 않는 다는 장점 때문이다. 본 논문에서는 현재 게임, 애니메이션, 영화 등 각종 콘텐츠에서 거의 필수 요소로 여겨지는 3D 어플리케이션 중, 특히 많이 사용되는 3D 캐릭터 애니메이션의 효율적인 교육을 위하여 Inverse Kinematics 시스템의 특성을 분석하였다. 수많은 Inverse kinematics tool 중, 실무에서 가장 많이 쓰이는 시스템인 Bone, Character studio, Character Animation Toolkit을 중심으로 각 tool의 장단점을 비교 분석함으로써 한정된 시간에 많은 양을 가르쳐야 하는 대학교에 있어서 효율적인 교육을 위해 위 세 가지 Inverse Kinematics tool중 어떤 것을 취사, 선택하여 교육하는 것이 학생들에게 유리한지에 대한 분석결과를 제안하였다.

• 제어로봇시스템학회논문지
• /
• 제9권11호
• /
• pp.925-936
• /
• 2003

The manipulability analysis of the parallel-type rolling mill proposed in Hong et al. [1] is re-visited. The parallel rolling mill uses two Stewart platforms in opposite direction for the generation of 6 degree-of-freedom motions of each roll. The objective of this new parallel rolling mill is to permit an integrated control of the strip thickness, strip shape, pair crossing angle, uniform wear of rolls, and tension of the strip. New forward/inverse kinematics problems, in contrast with [1], are formulated. The forward kinematics problem is defined as the problem of finding the roll-gap and the pair-crossing angle of two work rolls for given lengths of twelve legs. On the other hand, the inverse kinematics problem is defined as the problem of finding the lengths of twelve legs when the roll-gap, the pair-crossing angle, and the position and orientation of one work roll are given. The method of manipulability analysis used in this paper follows the spirit of [1]. But, because the rolling force and moment exerted from both upper and lower rolls have been included in the manipulability analysis, more accurate results than the use of a single platform can be achieved. Two. kinematic parameters, the radius of the base and the angle between two neighboring joints, are optimally designed by maximizing the global manipulability measure in the entire workspace.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.869-874
• /
• 2004

The inverse kinematics of five-axis milling machines produce large errors near stationary points of the required surface. When the tool travels cross or around the point the rotation angles may jump considerably leading to unexpected deviations from the prescribed trajectories. We propose three new algorithms to repair the trajectories by adjusting the rotation angles in such a way that the kinematics error is minimized. Given the tool orientations and the inverse kinematics of the machine, we first eliminate the jumping angles exceeding ${\pi}$ by using the angle adjustment algorithm, leaving the jumps less than ${\pi}$ to be further optimized. Next, we propose to apply an angle switching algorithm to compute the rotations and identify an optimized sequence of rotations by the shortest path scheme. Further error reduction is accomplished by the angle insertion algorithm based an o special interpolation to obtain the required rotations near the singularity. We have verified the algorithms by five-axis milling machines, namely, MAHO600E at the CIM Lab of Asian Institute of Technology and HERMLE UWF902H at the CIM Lab of Kasetsart University.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.144-148
• /
• 1989

We solve the inverse kinematics problems in robotics by employing a neural network. In the practical situation. it is not easy to obtain the exact inverse kinematics solution, since there are many unforeseen errors such as the shift of a robot base the link's bending, et c. Hence difficulties follow in the trajectory planning. With the neural network, it is possible to train the robot motion so that the robot follows the desired trajectory without errors even under the situation where the unexpected errors are involved. In this work, Back-Propagation rule is used as a learning method.

• 한국정밀공학회지
• /
• 제23권7호
• /
• pp.76-83
• /
• 2006

In this paper, an analysis on a new robot manipulator developed for the side buffing of the shoes is presented. The robot manipulator is composed of five degrees of freedom. An analysis on the forward and inverse kinematics was performed. Through the analysis, an analytic solution was derived for the joint angles corresponding to the position and orientation of the tool in the Cartesian coordinates. The hardware system of the robot composed of the control system, input/output interface system, and related electronic system was developed. The communication system was also developed to interact the robot with the related surrounding systems. A graphic user interface(GUI) program including the forward/inverse kinematics, control algorithm, and communication program was developed using visual C++ language.