• 한국방재학회:학술대회논문집
• /
• 2009.02b
• /
• pp.74.1-74.1
• /
• 2009

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.713-723
• /
• 2019

Due to the climate change and various rainfall pattern, it is difficult to estimate a rainfall criterion which cause inundation for urban drainage districts. It is necessary to examine the result of inundation analysis by considering the detailed topography of the watershed, drainage system, and various rainfall scenarios. In this study, various rainfall scenarios were considered with the probabilistic rainfall and Huff's time distribution method in order to identify the rainfall characteristics affecting the inundation of the Hyoja drainage basin. Flood analysis was performed with SWMM and two-dimensional inundation analysis model and the parameters of SWMM were optimized with flood trace map and GA (Genetic Algorithm). By linking SWMM and two-dimensional flood analysis model, the fitness ratio between the existing flood trace and simulated inundation map turned out to be 73.6 %. The occurrence of inundation according to each rainfall scenario was identified, and the rainfall criterion could be estimated through the logistic regression method. By reflecting the results of one/two dimensional flood analysis, and AWS/ASOS data during 2010~2018, the rainfall criteria for inundation occurrence were estimated as 72.04 mm, 146.83 mm, 203.06 mm in 1, 2 and 3 hr of rainfall duration repectively. The rainfall criterion could be re-estimated through input of continuously observed rainfall data. The methodology presented in this study is expected to provide a quantitative rainfall criterion for urban drainage area, and the basic data for flood warning and evacuation plan.

• Journal of Korea Water Resources Association
• /
• v.49 no.9
• /
• pp.773-787
• /
• 2016

A coupled river-overland hydrodynamic model was applied to estimate flood risk by a scenario-based approach. The study area is Seongseo Industrial Complex in Daegu which is located near Nakdong river and Geumho river. Inundation depth and velocity at each time were calculated by applying a coupled 1D/2D hydrodynamic model to the target area of interest. The 2D inundation analysis for river and overland domain was performed with the scenario-based approach that there are levee overflow against 100/200 year high quantile (97.5%) design flood and levee break against 100/200 year normal quantile (50%) design flood. The level of flood risk was displayed for resident/industrial area using information about maximum depth and velocity of each node computed from the 2D inundation map. The research outcome would be very useful in establishing specified emergency action plans (EAP) in case of levee break and overflowing resulting from a flood.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.2
• /
• pp.159-164
• /
• 2008

This study simulated the flood inundations of the Nakdong River catchment running through Yangsan, a small city located in the south eastern area of Korea by using the depth averaged two-dimensional hydrodynamic numerical model. The numerical model employs the staggered grid system including moving boundary and a finite different method to solve the Saint-Venant equations. A second order upwind scheme is used to discretize the nonlinear convection terms of the momentum equations, whereas linear terms are discretized by a second order Leap-frog scheme(Cho and Yoon, 1998). The numerical model was applied to a real topography to simulate the flood inundation of the Yangsan basin in Yangsan. The numerical result for urban district was visualization for three dimension. These results can be essentially utilized to construct the three dimensional inundation map after building the GIS-based database in local public organizations in order to protect the life and property safely.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.4
• /
• pp.101-110
• /
• 2010

The increased occurrence of flooding due to typhoons and local rainfall has necessitated damage prevention through the systematic construction of damage history and quantitative analysis of flood prediction data. In this study, we constructed a disaster information map for practical use by combining digital images and continuous cadastral maps of damaged areas using a geographic information system to provide basic data and attribute information. In addition, we predicted the areas at risk of flash floods by calculating the flood capacity of the study area for different rainfall frequencies through flood inundation simulation, which was used to obtain comprehensive disaster information. Further, we calculated the extent of the flooded area and the damage rate for different rainfall frequencies using cadastral information. Flood inundation simulation in the case of heavy rainfall was found to help improve the ability to react to a flood and enhance the efficiency of rescue work by supporting decision-making for disaster management.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.1
• /
• pp.74-88
• /
• 2010

In this study, the points of LiDAR were modified in order to generate various DEM resolutions by applying LiDAR data in Ulsan. Since the LiDAR data have points with 1m intervals, the number of points for each resolution was modified to the size of 1, 5, 10, 30, 50, 100m by uniformly eliminating the points. A runoff analysis was performed on Taehwa river and its tributary, Dongcheon, with 200 year rainfall exceedance probability. 2-dimensional inundation analysis was performed based on the density of LiDAR data using FLUMEN, which was used to establish domestic flood risk map. Once DEM data obtained from LiDAR survey are used, it is expected that the study results can be used as data in determining optimal grid spacing, which is economical, effective and accurate in establishing flood defence plans including the creation of flood risk map.

• The Journal of Engineering Geology
• /
• v.25 no.4
• /
• pp.449-458
• /
• 2015

The compilation of a flood hazard map is an efficient technique in managing areas at risk of flooding in the case of a dam-break. A scenario-based numerical modeling approach is commonly used to compile a flood hazard map related to dam-break and to determine the model parameters that capture peak discharge, including breach formation and progress, which are important in the modeling method. This approach might be considered less reliable if an existing model is used without local validation. In this study, a dam-break model is linked to a routing model to identify flood-risk areas in the case of failure of the Sandae Reservoir Gyeongju, Gyeongbuk. Model parameters are extracted from a DEM, and maps of land use and soil texture. The simulation results are compared with on-site investigations in terms of inundation and depth. The model reproduces the inundation zone with reasonable accuracy.

• Journal of Korean Society of Water Science and Technology
• /
• v.26 no.6
• /
• pp.133-142
• /
• 2018

Increasing localized torrential rainfall caused by abnormal climate are making higher damage to human and property through urban inundation So The need of preventive measures is being highlighted. In this study, the methodology for calculating flood depth in domestic water map using an interpolation method in order to utilizing the results of flood analysis provided only in the form of a report is suggested. In the Incheon Metropolitan City S area as the test-bed, the flood depth was calculated using the interpolating the actual flood analysis by image and verification was performed. Verification results showed that the error rate was 5.2% for the maximum flooding depth, and that the water depth value was compared to 10 random points, which showed a difference of less than 0.030 m. Also, as the results of the flood analysis were presented in various ways, the flood depth was extracted from the image of the result of the flood analysis, which changed the presentation method, and then compared and analyzed. The results of this study could be available for the use of basic data from the research on the urban penetration of domestic consumption and for decision-making of policy.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.4
• /
• pp.71-80
• /
• 2005

As local flash flood exceeding planned capacity occurs frequently, localized preparedness and response to flood inundation are increasingly important. Using XP-SWMM model and GIS techniques, this study analyzes inundation areas by local flash flood and develops rainfall standards for evacuation with the case of Sadang-Cheon area, a local stream and its nearby highly populated watershed in the southern part of metropolitan Seoul, Flood inundation areas overflowed from drainage systems are analyzed and mapped by amount of rainfall that is derived from reference levels of stream flow. Rainfall standards for evacuation are comprised of 'watch' (40mm/hr) in preparing for near-future inundation and 'evacuation' (65mm/hr) in responding to realized inundation. The methods suggested by this case study may be applied to other urban areas for sound flood prevention policy measures and thus risk minimization.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.2
• /
• pp.115-126
• /
• 2006

The purpose of this study is to develop an urban inundation model using GIS(geographic information system). The model is combining a storm sewer system model and a overland-flow model for the estimation inundation depth in urban area caused by the surcharge of storm sewers. SWMM(storm water management model) was employed to resolve the storm sewer flow and to provide the overflow hydrographs caused by the failure of a drainage system due to the shortage of drainage capacity. The level-pool overland-flow model and DEM based overland-flow model were used to calculate the detail inundation zones and depths due to the surcharge on overland surface. The simulation results can help the decision preventing flood damages by redesigning and enlarging the capacities of storm sewer systems in the inundation-prone areas. The model can also be applied to make the potential inundation area map and establish flood-mitigation measures as a part of the decision support system for flood control authority.