• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.549-557
• /
• 2013

An flood inundation map is able to convey spatial distribution of inundation to a decision maker for flood risk management. A roughness coefficient with unclear values and a discharge obtained from the stage-discharge rating equation are key sources of uncertainty in flood inundation mapping by using a hydraulic model. Also, the uncertainty analysis needs an observation for the flood inundation, and satellite images is useful to obtain spatial distribution of flood. Accordingly, the objective of this study is to quantify uncertainty arising roughness and discharge in flood inundation mapping by using a hydraulic model and a satellite image. To perform this, flood inundations were simulated by HEC-RAS and terrain analysis, and ISODATA (Iterative Self-Organizing Data Analysis) was used to classify waterbody from Landsat 5TM imagery. The classified waterbody was used as an observation to calculate F-statistic (likelihood measure) in GLUE (Generalized Likelihood Uncertainty Estimation). The results from GLUE show that flood inundation areas are 74.59 $km^2$ for lower 5 % uncertainty bound and 151.95 $km^2$ for upper 95% uncertainty bound, respectively. The quantification of uncertainty in flood inundation mapping will play a significant role in realizing the efficient flood risk management.

• Smart Media Journal
• /
• v.11 no.7
• /
• pp.52-60
• /
• 2022

Due to global warming and changes in the natural environment, flood damage to agricultural land due to wind and flood damage continues. Although disaster prevention projects have been continuously carried out since the founding of the country, progress has been insufficient compared to the sustained period, and huge costs are still being consumed. Therefore, it is necessary to use predictive simulation for pre-emptive response to inundation of farmland. In this paper, a case of immersion analysis simulation using a GIS(Geospatial Information System) based SWMM model was introduced, and the validity was confirmed through the error rate between our simulation result and the results of other models in the US and Korea. In addition, in the direction of using the simulation for agricultural land inundation, we presented various utilization methods to supplement the current agricultural land inundation-based information policy, such as the creation of flood traces. If simulation results from more regions are accumulated in the form of the flood analysis maps in the future, it is expected that they will be able to be utilized in various applications for preemptive response to and prevention of water disasters at the national level.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.42-48
• /
• 2016

Inundation Maps are used to predict potential areas of flooding through the signs of past flooding and flood inundation analysis for flooding expected in the future, and this has led to the development of various forms of disaster-related services by governments. However, each institution has its own individual scenarios for making maps for spatial expression. Therefore, the type of spatial information is not standardized and has many forms and structures. In this study, we attempted to design the metadata that would allow Inundation Map information to be shared and used in various fields. The international standard, ISO 19115, and the domestic standards, KS X ISO 19115, TTAS.IS - 19115 and TTAS.KO - 10.0139/R1 of TTA, were used in the design to derive an appropriate standard for comparative analysis by dividing into maintenance, constraints, metadata, spatial reference system, identification, and distribution. It is expected that inundation maps will be easier to utilize and distribute among institutions and private companies by systematically collecting and managing them through the metadata design based vector space information standard developed in this study.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.191-191
• /
• 2017

Floods have become more widespread and frequent among natural disasters and consisted significant losses of lives and properties worldwide. Flood's impacts are threatening socio-economic and people's lives in the Mekong River Basin every year. The objective of this study is to identify the flood hazard areas and inundation depth in the Mekong River Basin. A rainfall-runoff and flood inundation model is necessary to enhance understanding of characteristic of flooding. Rainfall-Runoff-Inundation (RRI) model, a two-dimensional model capable of simulating rainfall-runoff and flood inundation simultaneously, was applied in this study. HydoSHEDS Topographical data, APPRODITE precipitation, MODIS land use, and river cross section were used as input data for the simulation. The Shuffled Complex Evolution (SCE-UA) global optimization method was integrated with RRI model to calibrate the sensitive parameters. In the present study, we selected flood event in 2000 which was considered as 50-year return period flood in term of discharge volume of 500 km3. The simulated results were compared with observed discharge at the stations along the mainstream and inundation map produced by Dartmouth Flood Observatory and Landsat 7. The results indicated good agreement between observed and simulated discharge with NSE = 0.86 at Stung Treng Station. The model predicted inundation extent with success rate SR = 67.50% and modified success rate MSR = 74.53%. In conclusion, the RRI model was successfully used to simulate rainfall runoff and inundation processes in the large scale Mekong River Basin with a good performance. It is recommended to improve the quality of the input data in order to increase the accuracy of the simulation result.

• Water for future
• /
• v.28 no.6
• /
• pp.119-131
• /
• 1995

Two-dimensional diffusion and kinematic hydrodynamic models have been studied for preparing the flood inundation map. The models have been tested by applying to one-dimensional dam-break problem. The results have good agreements compared with those of dynamic wave model. The diffusion wave model produces the mass conservation error close to zero. Floodwave analyses for two-dimensional floodplain with obstruction and channel-floodplain show both stable and efficient results. The model presented in this study can be used for flood inundation map and flood warning system.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.1
• /
• pp.69-77
• /
• 2014

The objective of this study is to compare flood inundation models for small stream basin. HEC-RAS model was used for the analysis of one dimensional hydraulics and HEC-GeoRAS, Ras Mapper and RiverCAD models were applied for the flood inundation analysis in Gum Chung stream. Flood inundations are to simulate by flood inundation models using observed data and rainfall on each frequency and to compare with inundation area based on the flood plain maps. The results of this study are as follows; Area of flood inundations by HEC-GeoRAS model is similar to that of flood plain map and appears in order of RAS Mapper and RiverCAD model. Flood inundation area by RiverCAD model is to estimate lager than that of RAS Mapper and HEC-GeoRAS model in flood area on each frequency and the results show that they have a little difference in models of flood inundation analysis at small stream. Comparing the area of flood inundations by flood depth, the results of three models are relatively similar in flood depth as 2.0 m below, and RiverCAD model shows a significant difference in flood depth as 2.0 m or more.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1174-1178
• /
• 2005

In this study, flood inundations have been simulated by using the numerical model FLUMEN solving the shallow-water equations with a finite volume method. Before applying to a real problem, the numerical model is first applied to simplified problems. Obtained numerical results are verified by comparing to available analytical solutions and laboratory measurements. Reasonable agreements are observed. The model is then applied to a simulation of flood events with real geometries. The results of the present study provide basic informations for a flood inundation map.

• Journal of Environmental Science International
• /
• v.31 no.6
• /
• pp.461-470
• /
• 2022

When an agricultural soil dam collapses, the extent of inundation and the rate of diffusion vary depending on where the collapse occurs in the dam body. In this study, a dam collapse scenario was established and a two-dimensional numerical model FLO-2D was used to closely examine the inundation pattern of the downstream residential area according to the dam collapse point. The results were presented as a flood risk map showing the changes and patterns of the extent of inundation spread. The flood level and the time to reach the maximum water level vary depending on the point of collapse, and the inundation of the downstream area proceeds rapidly in the order of the midpoint, left point, and right point collapse. In the left collapse point, the submergence appeared about 0.5 hour slower than the middle point, and the right collapse point appeared about 1 hour slower than the middle point. Since the relative damage pattern is different depending on the dam collapse point, insurance and disaster countermeasures will have to be established differently.

• Journal of Korea Water Resources Association
• /
• v.39 no.5 s.166
• /
• pp.441-452
• /
• 2006

Recently the natural damage associated with flood disaster has been dramatically increased. Especially, inundation in the urban area causes serious damage to people and assets because of the concentration of infrastructure and population growth. The purpose of this study is to develop a new urban inundation model combining a storm sewer system model and a 2D overland-flow model for the estimation inundation depth In urban area caused by the surcharge of storm sewers. The movement of water in the studied urban watershed is characterized by two components, namely, the storm sewer flow component and the surcharge-induced inundation component. The model was applied to Goonja and Jangan catchments. Inundated depths were presented to demonstrate model simulation results. The simulation results can help the authority decide preventing flood damages by redesigning and enlarging the capacities of storm sewer systems in the inundation-prone areas. The model can also be applied to make the potential inundation area map and establish flood-mitigation measures as a part of the decision support system for flood control authority.

• Journal of Wetlands Research
• /
• v.12 no.1
• /
• pp.33-40
• /
• 2010

In this study, it has been intended to present the ways to improve some problems such as the difficulty of using the program which had got from the existing study, the computation and application of a lot of parameter and the complicated processing which need to be more simplified. Also It has been tried to bring up the ways to make a flood inundation map and a detailed inundation analysis which could reduce the risk factors. We selected an Anseong-Cheon basin, and wrote a flood inundation scenario based on extreme flood to exceed the planned frequency to consider only overflow and levee break and executed inundation simulation. Researchers conducted an analysis of overflow and levee break using function of HEC-RAS Storage with a One-Dimensional model. It applied Elevation versus Volume Curve for more correct inundation simulation than a method of Area-Time-Depth which used in popular. This study will suggest a mathematical method of SURFER with a little difference of inundation area more simplified and precise flood inundation than complicated Arcview 3.2a which used Query method of Arcview 3.2a.