• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.4
• /
• pp.892-898
• /
• 2008

3D rapid prototyping is the manufacturing technology to fabricate a prototype with the data stored in a computer, which differs from conventional casting technology in terms of an additive process. Various 3D rapid prototyping techniques such as stereolithograpy. fused deposition modeling. selective laser sintering, laminated object manufacturing have been developed but among them, 3D inkjet printing has a unique feature that materials could be jetted to directly form the body of a prototype, which could be a finished product functionally and structurally. However, this needs ink with a high solid content, which tends to increase the dynamic viscosity of ink. The increase of ink viscositytends to restrict the jettable range of ink and hence the jetting conditions should be optimized. The intrinsic speed of sound in a hot melt ink with ceramic nanoparticles dispersed is one of key components to determine the jettable range of ink. In this paper, the way to measure the intrinsic speed of sound in a hot melt ceramic ink is proposed and its influence on the jetting condition is discussed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.5
• /
• pp.859-867
• /
• 1997

In order to utilize the processing wastes of squid, chitosans were manufactured from the pens of domestic squid, Todarbdes pacificus and foreign squid, Ommastrephes bartrami and then, its rheological properties were studied. The amounts of nitrogen and minerals of the domestic squid pens were $11.4\%\;and\;0.1\%$ respectively, whereas those of its chitosan were $7.5\%\;and\;0.2\%$. In case of foreign squid pen and chitosan, the amounts of nitrogen and minerals were $12.1\%,\;0.8\%\;and\;7.8\%,\;0.2\%$ respectively. Intrinsic viscosity $([\eta]) $ of domestic and foreign squid pen chitosans were decreased with increasing pH from 3.4 to 5.4 which might be due to the reduced repulsion in inter- of intra- chitosan molecules. Intrinsic viscosity of the domestic and foreign squid pen chitosans were decreased with increasing NaCl concentration thus indicated that the domestic and foreign squid pen chitosans were polyelectrolyte molecules and stiffness of squid pen thitosans were 0.11 similar to that of k-carrageenan. Flow type of squid pen chitosan solutions were pseudoplastic fluids without yield stress by the viscosity measurement. But the squid pen chitosan solutions showed newtonian fluid up to $0.15\~0.24\%$ concentration for domestic and $0.21\~0.24\%$ concentration for foreign at $10\~50\%$. Concentration dependence of consistency index in infinitive dilute domain (Kc) were higher in the dilute domain than entangled domain. Activation energies (Ea) of the squid pen chitosans were 3.7, 6.3, 3.6, 4.0 and 4.1 Kcal/g moi for domestic and 3.2, 3.1, 3.4, 3.8 and 3.6 Kcal/g mol for foreign at 0.1, 0.15, 0.25, 0.35 and $0.5\%$, respectively.

• Korean Journal of Food Science and Technology
• /
• v.16 no.1
• /
• pp.11-16
• /
• 1984

Rheological properties of waxy and non-waxy rice starch solutions were evaluated with a narrow gap rotational and Cannon Fenske viscometers. The gelatinized rice starch solutions containing 0.2-1.0% starch displayed pseudoplastic flow behavior. At higher starch level, degree of pseudoplasticity of waxy rice starch solutions increased, while that of non-waxy rice did not changed apparently. The consistency coefficient (K) of non-waxy rice starch solutions increased with increasing gelatinization temperature, but waxy rice starch solutions remained constant, and in alkaline aqueous solutions both of them showed increasing K values. The value of K increased exponentially with an increase in concentration. The effect of the temperature on the viscosity of the solutions followed Arrhenius' type equation, and the activation energies were in the range of 3.675-3.775 kcal/g-mol that were near to that of pure water. The changes of reduced viscosity with concentration were followed Huggin's equation and the values of intrinsic viscosity and interaction coefficient were 0.78-1.59 dl/g and 0.67-2.75, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.5
• /
• pp.821-826
• /
• 1998

Functional properties of mucilage and pigment extracted from Opuntia ficus-indica var. saboten were determined at various temperatures, pHs and alcohol concentrations. The crude mucilage extracted from pickly pear showed pH 4.2, 0.14% total acidity and 8.1% total soluble solid content(w/w, wet basis). Polysaccharide was purified from mucilage extract by isopropanol precipitation. Intrinsic viscosity of polysaccharide was 18.1dl/g and decreased with increasing KCl concentration. Relative viscosity and color stability of mucilage extract were determined with capillary viscometer and spectrophotometer at 534nm, respectively. In additions of 1~20%(v/v) ethanol, the red pigment of mucilage extract was very stable, but relative viscosity, increased gradually. For heating above 7$0^{\circ}C$, the stability of red pigment decreased drastically, but rheological property of mucilage was not changed. During storage, the red pigment was extremely unstable at above pH 8.3. At both pH 3.0 and pH 4.2, the red pigment was the most stable at 4$^{\circ}C$ for 18 days. In the case of storage at 37$^{\circ}C$, pigment of mucilage extract at pH 3.0 was destroyed more quickly than that at pH 4.2. Natural mucilage extract(pH 4.2) showed the good stability of red pigment at 3$0^{\circ}C$ for 10 days.

• Applied Chemistry for Engineering
• /
• v.20 no.3
• /
• pp.322-328
• /
• 2009

Emulsion polymerization of octamethylcyclotetrasiloxane (OMCTS) was conducted under ultrasonic irradiation. Two sources of ultrasound with different intensities and frequencies of 20 KHz and 40 KHz were used for horn and bath type reactor, respectively. A combined process of horn and bath was also investigated. The effectiveness of the reaction systems was investigated by measuring conversion as well as intrinsic viscosity of the products. The influence of reaction temperature and sonication time on the progress of sonochemical polymerization was examined. It was found that conversion of greater than 80% and high viscosity were achieved within a few minutes of sonication in a horn type reactor, however, conversion and viscosity showed maximum values depending upon the sonication time. In a bath type reactor where a relatively weak intensity was maintained, longer duration time of more than one hour of sonication was required to reach a high level of conversion and viscosity. Compared with the horn type system, the conversion and viscosity in the bath type reactor were increased along with the sonication time. When the polymerization was carried out in a combined system of horn and bath, the evolution of conversion and molecular weight was quite different from the other cases. For the given geometry of reaction system, acoustic analysis using a commercial software was carried out and the results were correlated with experimental observation.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.335-336
• /
• 2003

The synthesis of poly(trimethylene terephthalate) (PTT), whose application is being expanded very rapidly to new apparel and carpet materials, was investigated by melt condensation polymerization using 1,3-propanediol (PDO) and terephthalic acid (TPA). No catalyst was used in the 1st step reaction (esterification), but tetrabutyl titanate(TBT) was used as a polyesterification catalyst ranging from 25 to 75 ppm based on the weight of TPA used in the 2nd step reaction (polyesterification). The molar ratio of PDO to TPA was set as 2.2:1. The effect of reaction conditions on the color and intrinsic viscosity of the final product was investigated. (omitted)

• The Korean Journal of Food And Nutrition
• /
• v.24 no.4
• /
• pp.602-606
• /
• 2011

찹쌀전분의 고압처리시 pH 3~10 조건에서 고유점도는 1.328~1.426 ml/g 범위로 원료전분(1.15 ml/g)보다 낮았다. 특히, 고유점도는 산성 및 알칼리성 조건에서 감소하였다. 전분의 호화과정 중 열에너지량을 나타내는 호화엔탈피는 pH 3, 4 및 5 조건에서 고압처리한 찹쌀전분이 각각 13.86, 13.47 및 13.42 J/g으로 원료전분(16.3 J/g)보다 낮은 값을 보였다. 찹쌀전분의 호화온도 및 엔탈피 감소는 고유점도가 낮아지는 현상과 일치하였다.

• Advances in materials Research
• /
• v.3 no.2
• /
• pp.117-128
• /
• 2014

Processable conducting polyaniline derivative with free amine functional groups was successfully synthesized from the monomer o-phenylenediamine in aqueous hydrochloric acid medium using ammonium persulfate as an oxidative initiator. The synthesized poly(o-phenylenediamine) (PoPD) in critical condition was found to be completely soluble in common organic solvents like dimethyl sulfoxide, N,N-dimethyl formamide etc. From the intrinsic viscosity measurement, the optimum condition for the polymerization was established. The polymer was characterized by ultraviolet visible spectroscopy, Fourier transform infrared spectroscopy, proton magnetic resonance spectroscopy ($^1HNMR$) and thermogravimetric (TGA) analyses. The weight average molecular weights of the synthesized polymers were determined by the dynamic light scattering (DLS) method. From the spectroscopic analysis the structure was found to resemble that of polyaniline derivative with free amine functional groups attached to ortho/meta position in the phenyl ring. However, very little ladder unit was also present with in the polymer chain. The moderate thermal stability of the synthesized polymer could be found from the TGA analysis. The average DC conductivity of $2.8{\times}10^{-4}S/cm$ was observed for the synthesized polymer pellet after doping with hydrochloric acid.

• Macromolecular Research
• /
• v.8 no.5
• /
• pp.215-223
• /
• 2000

A novel diamine monomer, containing fluorine and phosphine oxide, bis(3-aminophenyl) 3,5-bis(trifluoromethyl)phenyl phosphine oxide (mDA6FPPO), was prepared via Grignard reaction, and utilized to prepare polyimides with dianhydrides such as PMDA, 6FDA, BTDA or ODPA, by the conventional two-step route; preparation of poly(amic acid), followed by solution imidization. The polyimides were characterized by FT-IR, NMR, and DSC with intrinsic viscosity and refractive index also being evaluated. A phosphine oxide containing monomer, bis(3-aminophenyl)phenyl phosphine oxide (mDAPPO) and a commercial 3,3-diaminodiphenyl sulfone (mDDS) were also used for comparison. The polyimides derived from mDA6FPPO exhibited high T$\sub$g/, excellent solubility and low birefringence.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.2
• /
• pp.8-17
• /
• 2012

Three kinds of cationic acrylamide copolymer with different branch degree were prepared controlling the dosage of N, N'-methylenebisacrylamide. The physical characteristics of the branch-degree-modified copolymers were analyzed by intrinsic viscosity and charge density. The branch degree measurements were investigated by applying the colloidal titration phenomena using a spectrophotometer and comparison with the cationic regain measurement method. The results showed that the absorbance behaviors of spectrophotometer were distinctively different with the branch degree of copolymers. Also, the branch degree determinations and molecular structure estimations of the copolymers were numerically measured by applying the titration phenomena using a spectrophotometer. Finally, three kinds of branch-degree-modified copolymers were applied to flocculation test using arbocel micro pulp for the determination of flocculation behavior by different morphology of cationic acrylamide copolymers.