• 산업기술연구
• /
• 제24권A호
• /
• pp.83-90
• /
• 2004

Generally, electronic appliances are used on the basis of normal power source supply. The power source inevitably includes the abnormal condition, such as, sudden voltage sagging, power interrupt, and induced noises. As the electronic appliances which include micro-controller-based circuits are being increased recently, the controller circuit sometimes malfunctions by the abnormal condition of the power source. This situation causes serious problems such as hitch of electric appliance, fire and medical instrument glitch, which produces serious situations. In this paper, development of power interrupt tester which is highly suitable for an endurance test device under abnormal power source to microprocessor-based circuits is proposed 89C2051 microcontroller is performed to make power interrupt signal, and software controls peripheral hardwares and built-in functions. Experimental results of this study will offer a good application to electronic appliance maker as a test device of hardware and software debugging use.

• 한국IT서비스학회지
• /
• 제14권3호
• /
• pp.183-196
• /
• 2015

The concept of energy-efficient networking has begun to spread in the past few years, gaining increasing popularity. A common opinion among networking researchers is that the sole introduction of low consumption silicon technologies may not be enough to effectively curb energy requirements. Thus, for disruptively boosting the network energy efficiency, these hardware enhancements must be integrated with ad-hoc mechanisms that explicitly manage energy saving, by exploiting network-specific features. The IEEE 802.3az Energy Efficient Ethernet (EEE) standard is one of such efforts. EEE introduces a low power mode for the most common Ethernet physical layer standards and is expected to provide large energy savings. However, it has been shown that EEE may not achieve good energy efficiency because mode transition overheads can be significant, leading to almost full energy consumption even at low utilization levels. Coalescing techniques such as packet coalescing and interrupt coalescing were proposed to improve energy efficiency of EEE, but their implementations typically adopt a simple policy that employs a few fixed values for coalescing parameters, thus it is difficult to achieve optimal energy efficiency. The paper proposes adaptive interrupt coalescing (AIC) that adopts an optimal policy that could not only improve energy efficiency but support performance. AIC has been implemented at the sender side with the Intel 82579 network interface card (NIC) and e1000e Linux device driver. The experiments were performed at 100 M bps transfer rate and show that energy efficiency of AIC is improved in most cases despite performance consideration and in the best case can be improved up to 37% compared to that of conventional interrupt coalescing techniques.

• 한국통신학회논문지
• /
• 제40권7호
• /
• pp.1313-1329
• /
• 2015

MANET 환경에서 빈번한 경로 단절은 반복된 경로 탐색으로 인해 제어 패킷 오버헤드와 패킷 손실을 증가시킨다. AODV-I는 event driven방식을 이용하여 주기적인 Hello 메시지를 제거함으로써 AODV의 성능을 개선하였다. Hello 메시지와 달리 각 이벤트마다 전송되는 인터럽트 메시지는 이웃노드의 상태를 알 수 있어 링크 단절을 탐지 및 예측도 할 수 있다. 따라서 AODV-I의 성능은 각 인터럽트 메시지 종류에 따라 처리 절차를 추가함으로써 더욱 개선될 수 있고, 또한 AODV의 단일경로로 인한 문제를 백업 경로기법을 추가하여 개선하는 것도 가능하다. 본 연구에서는 경로 탐색 수와 전송 지연을 줄이기 위해 개선된 백업 경로방식과 인터럽트 메시지 방식을 결합한 AODV-IB를 제안한다. AODV-IB는 각 인터럽트 메시지마다 링크 단절 예측과 탐지에 대한 처리 절차를 추가하여 AODV-I를 개선한다. 또한 추가적인 제어 패킷 없이 지연을 최소화하도록 개선한 백업 경로 방식도 구현한다. QualNet 5.0을 사용하여 구현한 시뮬레이션 결과는 AODV-I에 비해 제안하는 AODV-IB가 더 좋은 성능을 나타낸다.

• 전기학회논문지
• /
• 제67권5호
• /
• pp.644-650
• /
• 2018

According to a miniaturization and integration of electric device, a little size of fuse satisfying the current carrying capacity as well as an explosive tolerance and current interrupt rating are required. Fe-Ni alloy is applied to decrease an oxidation of fuse elements. A resistance and T.C.R(temperature coefficient of resistance) of a fuse are analyzed by changing a content of Ni And full rated current I-T curve from 1A to 6.3A has been tested. In order to an explosive energy, a straight wire type is selected to reduce a fuse melting time. An interrupt rating test was conducted by changing a content of Ni and the optimal content of Ni is to be 40%.

• 대한임베디드공학회논문지
• /
• 제12권3호
• /
• pp.159-167
• /
• 2017

Software safety is a key issue in embedded system of automotive and aviation industries. Various software testing approaches have been proposed to achieve software safety like ISO26262 Part 6 in automotive environment. In spite of one of the classic and basic approaches, stack memory is hard to estimating exactly because of uncertainty of target code generated by compiler and complex nested interrupt. In this paper, we propose an approach of analyzing the maximum stack usage statically from target binary code rather than the source code that also allows nested interrupts for determining the exact stack memory size. In our approach, determining maximum stack usage is divided into three steps: data extraction from ELF file, construction of call graph, and consideration of nested interrupt configurations for determining required stack size from the ISR (Interrupt Service Routine). Experimental results of the estimation of the maximum stack usage shows proposed approach is helpful for optimizing stack memory size and checking the stability of the program in the embedded system that especially supports nested interrupts.

• 한국항공우주학회지
• /
• 제33권9호
• /
• pp.113-119
• /
• 2005

실시간 선점형 다중 태스크 운영체제를 기반으로 구동하는 프로세서와 연결된 디바이스로부터 데이터를 입수하는 방법은 크게 폴링(Polling)과 인터럽트 구동(Interrupt driven) 방식으로 구분할 수 있다. 이들 모두에 대한 기술적인 접근은 운영체제의 스케줄링 정책 및 소프트웨어 아키텍쳐에 따라 달라질 수 있다. 위성 컴퓨팅 환경에서 위성 서브 시스템 또는 컴포넌트로부터 입수되는 데이터의 처리시 시간 준수와 정확성을 보장하는 것은 비행 소프트웨어를 개발시마다 요구되는 중요한 요구사항 중의 하나이다. 본 논문에서는 디바이스의 입출력 방식과 스케줄링과의 관계에 대한 분석 및 이에 따른 프로세서와 디바이스간의 신뢰적인 데이터 입출력 방법을 제안한다.

• 한국정보통신학회논문지
• /
• 제6권5호
• /
• pp.739-746
• /
• 2002

본 논문에서는 영상전화 서비스 수행을 위한 기존 플랫폼들의 문제점을 분석하고 이를 해결 할 수 있는 차등 태스크 인터럽트 방식의 멀티미디어 데이터 스트림 처리구조를 제안하고, 이 구조를 기반으로 하여 ITU-T H.320 표준규격과 국가별 차이 규격도 수용하는 영상단말 시스템을 설계하여 기존 시스템의 문제점을 보완하였다. 구현과 실험을 통해 기존 시스템의 구조나 방식보다 여러가지 성능 및 품질 측면에서 개선됨을 검증하였다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2010년도 춘계 종합학술대회 논문집
• /
• pp.272-273
• /
• 2010

마이크로프로세서 시스템의 키보드 버튼의 누름 결과를 기존의 입력 스캔 제어방법이 아닌 인터럽트 제어방법으로 시도하였다. 키보드 스캔 결과를 인터럽트 제어 방법으로 제어 시 적절한 30ms의 주기로 인식하도록 함으로써 마이크로프로세서의 작업부하를 줄이는 키보드 버튼 누름 제어 인식 알고리즘을 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.2091-2093
• /
• 1998

In this paper, development of power interrupt tester which is highly suitable for microprocessor-based circuits test device is proposed. ATMEL 89C2051 microcontroller is performed to make power interrupt signal, and built-in software controls peripheral hardwares and many functions. Experimental results of this study will offer a good application to electronic appliance maker as a test device of hardware and software debugging-use

• 대한임베디드공학회논문지
• /
• 제14권2호
• /
• pp.63-69
• /
• 2019

Recently, ultra-low latency flash storage devices such as Z-SSD and Optane SSD were introduced with the significant technological improvement in the storage devices which provide much faster response time than today's other NVMe SSDs. With such ultra-low latency, $10{\mu}s$, storage devices the cost of context switch could be an overhead during interrupt-driven I/O completion process. As an interrupt-driven I/O completion process could bring an interrupt handling overhead, polling or hybrid-polling for the I/O completion is known to perform better. In this paper, we analyze tail latency problem in a polling process caused by process scheduling in data center environment where multiple applications run simultaneously under one system and we introduce our adaptive polling selection technique which dynamically selects efficient processing method between two techniques according to the system's conditions.