• 한국정보통신학회논문지
• /
• 제12권10호
• /
• pp.1853-1859
• /
• 2008

본 논문에서는 컴퓨터 집적 영상 복원(CIIR) 기법 기반의 3D 패턴 인식 응용을 위해서 평 면 3D 복원 영상의 해상도를 향상시키는 새로운 방식을 제안한다. 제안하는 방식에서는 ClIR에서 각각의 요소 영상에 대해서 원형 매핑 모델과 보간법을 복합사용하여 확대 중첩을 통해 향상된 3D 영상을 복원한다. 제안하는 방식에 대해서 정확한 CIIR 방식의 객관적인 해석을 위해서 Gaussian 영상을 이용한 테스트 모델을 설명하고 제안하는 방식에 대해서 성능평가를 수행한다. 그리고 3차원 물체에 대한 컴퓨터 복원 실험을 수행하고 그 결과를 보고한다.

• 대한원격탐사학회지
• /
• 제8권2호
• /
• pp.131-145
• /
• 1992

A low cost personal computer and image processing S/W were empolyed to derive Digtal Elevation Model(DEM) of tidal flat from multitemporal LANDSAT TM images, and to create three-dimensional(3D) perspective views of the tidel flat on Komso bay in west coasts of Korea. The method for generation of Digital Elevation Model(DEM) in tidal flat was considered by overlapping techniques of multitemporal LANDSAT TM images and interpolations. The boundary maps of tidal flat extracted from multitemporal images with different water high were digitally combined in x, y, z space with tide in formation and used as an inputcontour data to obtain an elevation model by interpolation using spline function. Elevation errors of less than $\pm$0.1m were achived using overlapping techniques and a spline interpolation approach, respectively. The derived DEM allows for the generation of a perspective grid and drape on the satellite image values to create a realistic terrain visualization model so that the tidal flat may be viewed from and desired direction. As the result of this study, we obtained elevation model of tidal flats which contribute to characterize of topography and monitoring of morphological evolution of tidal flats. Moreover, the modal generated here can be used for simulation of innudation according to tide and support other studies as a supplementary data set.

• 한국전산구조공학회논문집
• /
• 제14권4호
• /
• pp.495-503
• /
• 2001

기능 경사 복합재에서는 열적 탄성 거동이 성분의 구성분포에 의해 명백하게 구분되어지도록 두가지의 성분입자들을 특정한 체적분율 분포에 따라서 혼합한다. 따라서, 설계자는 주어진 제약조건에 대해 목적하는 성능에 적합한 기능 경사 복합재를 설계하기 위해서 최적의 체적분율 분포를 결정해야만 한다. 본 연구에서는 금속과 세라믹으로 구성된 내열 기능 경사 복합재의 2차원 체적분율을 최적화하기 위하여 내부벌칙함수법과 유한차분법을 사용한 수치 최적화기법을 제안하였다. 최적화 효율을 위해 단일 설계변수의 유한개의 균질 사각형 격자로 기능 경사 복합재의 영역을 나누었다. 그렇지만, 연속적인 체적분율을 구현하기 위하여 최적설계 후에 전체적으로 연속적인 이차원 선형함수로써 불연속적인 체적분율을 보간하였다.

• 항공우주시스템공학회지
• /
• 제16권4호
• /
• pp.17-27
• /
• 2022

본 논문에서는 에어포일의 좌표 데이터에 대해 공력 특성을 예측할 수 있는 합성곱 신경망 기반 네트워크 프레임 워크를 설계하였으며 Xfoil을 이용한 공력 데이터를 적용하여 네트워크의 가능성을 확인하였다. 이 때 에어포일의 두께 변화에 따른 공력 특성 예측을 수행하였다. 부호화 거리 함수를 이용하여 에어포일의 좌표 데이터를 이미지 데이터로 변환하였으며 받음각 정보를 반영하였다. 또한 에어포일의 압력 계수 분포를 축소 모델 기법 중 하나인 적합 직교 분해를 이용하여 축소된 데이터로 표현하였으며 이를 네트워크의 출력 데이터로 사용하였다. 제시하는 네트워크의 내삽과 외삽 성능을 평가하기 위하여 시험 데이터를 구성하였고, 결과적으로 내삽 데이터에 대한 예측 성능이 외삽에 비해 우수함을 확인하였다.

• Smart Structures and Systems
• /
• 제31권3호
• /
• pp.229-245
• /
• 2023

The absence of excitation measurements may pose a big challenge in the application of structural damage identification owing to the fact that substantial effort is needed to reconstruct or identify unknown input force. To address this issue, in this paper, an iterative strategy, a synergy of Tikhonov regularization method for force identification and modified Jaya algorithm (M-Jaya) for stiffness parameter identification, is developed for damage identification with partial output-only responses. On the one hand, the probabilistic clustering learning technique and nonlinear updating equation are introduced to improve the performance of standard Jaya algorithm. On the other hand, to deal with the difficulty of selection the appropriate regularization parameters in traditional Tikhonov regularization, an improved L-curve method based on B-spline interpolation function is presented. The applicability and effectiveness of the iterative strategy for simultaneous identification of structural damages and unknown input excitation is validated by numerical simulation on a 21-bar truss structure subjected to ambient excitation under noise free and contaminated measurements cases, as well as a series of experimental tests on a five-floor steel frame structure excited by sinusoidal force. The results from these numerical and experimental studies demonstrate that the proposed identification strategy can accurately and effectively identify damage locations and extents without the requirement of force measurements. The proposed M-Jaya algorithm provides more satisfactory performance than genetic algorithm, Gaussian bare-bones artificial bee colony and Jaya algorithm.

• 한국정밀공학회지
• /
• 제23권1호
• /
• pp.174-184
• /
• 2006

In order to fill the holes with complex shapes in the large polygon model, a new approach which is based on the implicit surface interpolation method combined with domain decomposition method is presented. In the present study, a surface is constructed by creating smooth implicit surface from the incomplete polygon model through which the surface should pass. In the method an implicit surface is defined by a radial basis function, a continuous scalar-valued function over the domain $R^3$ The generated surface is the set of all points at which this scalar function takes on the value zero and is created by placing zero-valued constraints at the vertices of the polygon model. In this paper the well-known domain decomposition method is used in order to treat the large polygon model. The global domain of interest is divided into smaller domains where the problem can be solved locally. LU decomposition method is used to solve a set of small local problems and their local solutions are combined together using the weighting coefficients to obtain a global solution. In order to show the validity of the present study, various hole fillings are carried out fur the large and complex polygon model of arbitrary topology.

• 대한전자공학회논문지SD
• /
• 제37권5호
• /
• pp.16-22
• /
• 2000

본 논문은 HPO 홀로그램의 산란패턴을 전송하는데 적용 가능한 데이터 압축 알고리즘을 제시한다. 제시된 알고리즘은 홀로그램 데이터를 decimation 하기 위해서 변조함수를 이용해서 홀로그램 패턴의 대역폭을 압축시킨 것으로 수신단에서 데이터 복원을 위해서 인터폴레이션 과정이 필요하다. 압축 알고리즘 및 압축률의 유도와 함께 수신단에서 영상이 복원될 때 복원영상의 해상도 및 고조파(harmonic) 간섭영상의 주기를 분석한다. 마지막으로 시뮬레이션을 통해서 undersampling된 홀로그램 패턴에 대해 직접 복원시킨 결과와 변조함수에 의한 decimation 및 인터폴레이션 과정을 거친 후 복원시킨 결과를 비교하여 제시된 방법의 타당성을 보인다.

• 대한기계학회논문집A
• /
• 제26권5호
• /
• pp.872-880
• /
• 2002

The finite element analysis is frequently used to predict dynamic responses of complex structures. Since the predicted responses often differ from experimentally measured ones, updating of the finite element models is performed to make the finite element results agree with the measured ones. Among several model updating methods, one is to use FRF(frequency response function) data without a modal analysis. This paper investigates characteristics of the model updating method in order to improve the method. The investigation is focused on how to obtain FRFs for unmeasured rotational displacements and how to consider damping. For the investigation simulated data and experimental data for a cantilever beam are used.

• 소성∙가공
• /
• 제21권7호
• /
• pp.420-425
• /
• 2012

A new model is suggested for the prediction of radial displacements of a roll in order to analyze multi-high rolling mills. The model was developed from predictions based on finite element simulations. This model utilizes the compliance coefficient, which is expressed as a function of three dimensionless parameters, and is approximated by using the same interpolation function as used in the finite element method. The prediction accuracy of the model is demonstrated through comparison with the predictions from the FE model.

• ETRI Journal
• /
• 제22권2호
• /
• pp.1-10
• /
• 2000

Pattern recognition is one of the most common problems encountered in engineering and scientific disciplines, which involves developing prediction or classification models from historic data or training samples. This paper introduces a new approach, called the Representational Capability (RC) algorithm, to handle pattern recognition problems using radial basis function (RBF) models. The RC algorithm has been developed based on the mathematical properties of the interpolation and design matrices of RBF models. The model development process based on this algorithm not only yields the best model in the sense of balancing its parsimony and generalization ability, but also provides insights into the design process by employing a design parameter (${\delta}$). We discuss the RC algorithm and its use at length via an illustrative example. In addition, RBF classification models are developed for heart disease diagnosis.