Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Updating of a Finite Element Model with a Damping Effect Using Frequency Response Functions

주파수응답함수를 이용한 감쇠가 있는 유한요소모형의 개선

  • 이건명 (경상대학교 수송기계공학부) ;
  • 이형석 (경상대학교 대학원 기계공학과) ;
  • 이한희 (경상대학교 대학원 기계공학과)
  • Published : 2002.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

The finite element analysis is frequently used to predict dynamic responses of complex structures. Since the predicted responses often differ from experimentally measured ones, updating of the finite element models is performed to make the finite element results agree with the measured ones. Among several model updating methods, one is to use FRF(frequency response function) data without a modal analysis. This paper investigates characteristics of the model updating method in order to improve the method. The investigation is focused on how to obtain FRFs for unmeasured rotational displacements and how to consider damping. For the investigation simulated data and experimental data for a cantilever beam are used.

Keywords

References

  1. Berman, A. and Nagy, E. J., 1983, 'Improvement of a Large Analytical Model Using Test Data,' AIAA Journal, Vol. 21, No. 8, pp. 1168-1173 https://doi.org/10.2514/3.60140
  2. Baruch, M., 1984, 'Methods of Reference Basis for Identification of Linear Dynamic Structures,' AIAA Journal, Vol. 22, No. 4, pp. 561-564 https://doi.org/10.2514/3.48481
  3. O'Callahan, J. C. and Leung, R. K., 1985, 'Optimization of Mass and Stiffiness Matrices Using a Generalized Inverse Technique Using the Measured Models,' Proceedings of the International Modal Analysis Conference, pp. 75-79
  4. Imregun, M., Ewins, D. J., Hagiwara, I. and Ichikawa, T., 1994, 'A Comparison of Sensitivity and Response Function Based Updating Techniques,' Proceedings of the International Modal Analysis Conference, pp. 1390-1400
  5. 장경진, 박영필, 2000, '일반화 자유경계 모드 감도법을 이용한 차체구조물의 모델개선,' 대한기계학회논문집 A권, 제 24권, 제 5호, pp. 1133-1145
  6. Schulz, M. J. and Thyagarajan, S. K., 1995, 'Inverse Dynamic Design Technique for Model Correction and Optimization,' AIAA Journal, Vol. 33, No. 8, pp. 1486-1491 https://doi.org/10.2514/3.12571
  7. Friswell, M. I. and Penny, J. E. T., 1992, 'The Effect of Close or Repeated Eigenvalues on the Updating of Model Parameters from FRF Data,' Journal of Vibration and Acoustics, Vol. 114, pp. 514-520 https://doi.org/10.1115/1.2930293
  8. Mottershead, J. E., 1998, 'On the Zeros of Structural Frequency Response Functions and Their Application to Model Assessment and Updating,' Proceedings of the International Modal Analysis Conference, pp. 500-503
  9. Lin, R. M. and Ewins, D. J., 1994, 'Analytical Model Improvement Using Frequency Response Functions,' Mechanical Systems and Signal Processing, Vol. 8, No. 4, pp. 437-458 https://doi.org/10.1006/mssp.1994.1032
  10. Imregun, M., Visser, W. J. and Ewins, D. J., 1995, 'Finite Element Model Updating Using Frequency Response Function Data - I. Theory and Initial Investigation,' Mechanical Systems and Signal Processing, Vol. 9, No. 2, pp. 187-202 https://doi.org/10.1006/mssp.1995.0015
  11. 서상훈, 지태한, 박영필, 1997, '주파수응답함수를 이용한 유한요소모델의 개선 및 결합부 동정,' 한국소음진동공학회지, 제 7권, 제 1호, pp. 61-69
  12. 박윤식, 박용화, 1999, '구조물 동특성 변경관련 연구 분야 및 동향(IV),' 한국소음진동공학회지, 제 9권, 제 6호, pp. 1091-1105
  13. 박윤식, 박용화, 2001, '구조물 동특성 변경관련 연구 분야 및 동향(V),' 한국소음진동공학회지, 제 10권, 제 1호, pp. 25-32
  14. Petyt, M., 1990, Introduction to Finite Element Vibration Analysis, Cambridge University Press, pp. 386-392
  15. Rao, S. S., 1995, Mechanical Vibrations, Addison-Wesley, pp. 731-734