• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2022년도 학술발표회
• /
• pp.137-137
• /
• 2022

Evaluating interpolated rainfall uncertainty of hydrological models caused by different interpolation methods for basins where can not fully collect rainfall data are necessary. In this study, the adaptive MCMC method under effects of ILFs was used to analyze the interpolated rainfall uncertainty of the SURR model for Gunnam basin, Korea. Three events were used to calibrate and one event was used to validate the posterior distributions of unknown parameters. In this work, the performance of four ILFs on uncertainty of interpolated rainfall was assessed. The indicators of p_factor (percentage of observed streamflow included in the uncertainty interval) and r_factor (the average width of the uncertainty interval) were used to evaluate the uncertainty of the simulated streamflow. The results showed that the uncertainty bounds illustrated the slight differences from various ILFs. The study confirmed the importance of the likelihood function selection in the application the adaptive Bayesian MCMC method to the uncertainty assessment of the SURR model caused by interpolated rainfall.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1618-1622
• /
• 2004

In this paper, the linearly interpolated PRC(Pseudo Range Correction) regenerating algorithm was applied to improve the DGPS(Differential Global Positioning System) positioning accuracy at user's spot by using the various PRC information obtained from multi-DGPS reference stations. The PRC information of each GPS satellite is not varying rapidly; it is possible to assume that the variation of PRC information of each GPS satellite is linear. So the linearly interpolated PRC regenerating algorithm can be applied to improve the DGPS positioning accuracy at user's spot by using the various PRC information obtained from multi-DGPS reference stations. To test the performance of the linearly interpolated PRC regenerating algorithm, maritime DGPS reference stations' PRC data was used in RTCM format. 11 maritime DGPS reference stations are in service providing DGPS information to public since 1999. Two set of 3 DGPS reference stations are selected to compare the performance of the linearly interpolated PRC regenerating algorithm. The DGPS positioning accuracy was dramatically improved about 40%. Linearly interpolated PRC regenerating algorithm adopted multi-channel DGPS receiver will be developed in near future.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.129-133
• /
• 2004

9 GPS data with a 30 second sampling rate were extracted from the GPS raw data that recorded with 1 second interval for interpolation. 9 GPS data were interpolated using lagrange interpolation method and compared to the GPS raw data. Using a 9th-order interpolation, error of interpolated code data were within 0.5m.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.122-127
• /
• 2001

Lasting machines for shoe manufacturing are continuously developed with the aid of automation and Computer Aided Manufacturing (CAM). Although automation and CAM techniques have tremendously reduced the labor in shoe manufacturing field, there still remain some parts manufactured by experts. In order to enhance the capability and efficiency of machines for labor-free shoe manufacturing, CAD data of a shoe last is indispensable. While CAD datarization takes the fundamental role in the shoe design as well as the shoe manufacturing, there has been little research for the CAD datarization of a shoe last. In this paper, a new procedure for CAD datarization of a shoe last using finite element patches is proposed and some data for the control part of the shoe lasting machine are extracted and interpolated from the CAD data. The outer line of a shoe-last sole is interpolated by a tension spline method and bonding lines are extracted from the shoe CAD data. Finally, initial setting data for the lasting machine are extracted from the last CAD data and initial setup parts of the lasting machine.

• 대한공간정보학회지
• /
• 제4권2호
• /
• pp.173-180
• /
• 1996

격자화 자료변환에서는 격자절점의 보간과정에서 경중률을 산정하는 수학적 알고리즘과 이산자료의 특성에 따라 격자화 기법들간에 상이한 보간결과를 제시하므로 격자화기법의 최종선정에 앞서 탐색거리, 탐색영역, 탐색옵션에 따른 격자화기법들의 사전 검토가 요망된다.; 이를 위해 본 연구에서는 해석 입체도화기로부터 획득한 이산지형정보에 6가지 격자화기법을 동일한 검색기준에 따라 적용하고 원자료의 보존성 및 입체도화기로부터 제작된 등고선도와의 비교를 통하여 격자화 기법에 따른 3차원 이산지형정보의 보간특성을 고찰하였으며 아울러 격자화된 DEM의 임의 종단방향에 대한 단면선형의 검토 및 토공량 산정을 통하여 격자화기법의 실 응용면도 고찰하였다.

• The Plant Pathology Journal
• /
• 제26권1호
• /
• pp.37-48
• /
• 2010

This paper describes a web-based information system for plant disease forecast that was developed for crop growers in Gyeonggi-do, Korea. The system generates hourly or daily warnings at the spatial resolution of $240\;m{\times}240\;m$ based on weather data. The system consists of four components including weather data acquisition system, job process system, data storage system, and web service system. The spatial resolution of disease forecast is high enough to estimate daily or hourly infection risks of individual farms, so that farmers can use the forecast information practically in determining if and when fungicides are to be sprayed to control diseases. Currently, forecasting models for blast, sheath blight, and grain rot of rice, and scab and rust of pear are available for the system. As for the spatial interpolation of weather data, the interpolated temperature and relative humidity showed high accuracy as compared with the observed data at the same locations. However, the spatial interpolation of rainfall and leaf wetness events needs to be improved. For rice blast forecasting, 44.5% of infection warnings based on the observed weather data were correctly estimated when the disease forecast was made based on the interpolated weather data. The low accuracy in disease forecast based on the interpolated weather data was mainly due to the failure in estimating leaf wetness events.

• Spatial Information Research
• /
• 제18권4호
• /
• pp.33-41
• /
• 2010

우리나라에는 100여개의 GPS 상시관측소가 설치되어 있으나 대략 10개의 관측소만이 GPS 전용 기상센서를 보유하고 있다. 따라서 전국을 대상으로 하는 GPS 가강수량 산출을 위해서는 주변 AWS의 가상자료 보간에 의한 GPS 관측소 기상정보의 생성이 필요하다. 이 연구에서는 가상자료 보간 방법인 역해면경정과 크리깅의 보간 정확도를 분석하였다. 그 결과 역해변경정법의 RMSE가 기압의 경우 약 7배, 기온의 경우 약 2배 더 정확함을 확인하였다. PWV 정확도 분석을 위해 역해면경정법으로 보간된 기상자료와 GPS 관측자료를 이용해 2008년 여름철에 대한 GPS PWV를 산출하였다. 보간 기상 자료를 이용한 GPS PWV를 GPS 전용 기상센서의 값을 사용한 PWV, 라디오존데 PWV와 비교하였다. 비교 결과 보간 기상자료를 이용한 GPS PWV 가 요구 정확도 3mm이내를 만족함을 확인하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.230-234
• /
• 1997

Reverse engineering involves digitizing a three-dimensional model or part converting the data to a CAD database description and manufacturing by CNC. Currently, the digitization is done through measurements taken manually by a CMM or touch probe mounted on a CNC machinetool. Some reverse engineering techniques require close integration between the data collection method and the surface-fitting algorithms. Accurate surface data are collected by input to the surface fitting method. This study has been found that both the smoothness of surfaces and accuracy of surface fitting are related with the degree of the interpolated surfaces.

• 한국측량학회지
• /
• 제9권1호
• /
• pp.63-73
• /
• 1991

음향측심자료는 연직단면상의 연속자료이며 측심선사이에는 자료추출점이 없다. 본 연구에서는 음향측심자료에 대하여 측심선상에서 등간격으로 선형보간을 실시하고, 이 보간점을 자료점으로 하여 반분산으로 부터 유도된 크리깅 법으로 측심선 사이에 위치한 정규격자점의 수심을 보간하였다. 이와같은 계층적 보간법은 음향측심 자료에 있어서 기존의 이동평균법이나 크리깅법에 비해 정확도 향상과 보간소요시간절감 효과를 보였다.

• 한국CDE학회논문집
• /
• 제6권1호
• /
• pp.17-23
• /
• 2001

Lasting machines for shoe manufacturing are continuously developed with the aid of automation and CAM(Computer Aided Manufacturing). Although automation and CAM techniques have tremendously reduced the labor in shoe manufacturing, there still remain some parts manufactured by experts. In order to enhance the capability and efficiency of machines for labor-free shoe manufacturing, CAD data of a shoe last is essential. While CAD datarization takes the fundamental role in the shoe design and manufacturing, there has been little research for the CAD datarization of a shoe last. In this paper, a new procedure for CAD datarization of a shoe last using finite element patches and a tension sl)line method is proposed for application to shoe manufacturing machines. The outer line of a shoe-last sole is interpolated by a tension spline method and bonding lines are extracted from the shoe CAD data. Data set for a control algorithm of the tasting machine can be produced from the CAD data.