• Journal of Information Processing Systems
• /
• v.18 no.6
• /
• pp.822-829
• /
• 2022

According to existing study into the remote fault diagnosis procedure, the current diagnostic approach has an imperfect decision model, which only supports communication in a close distance. An Internet of Things (IoT)-based remote fault diagnostic approach for wind power equipment is created to address this issue and expand the communication distance of fault diagnosis. Specifically, a decision model for active power coordination is built with the mechanical energy storage of power generation equipment with a remote diagnosis mode set by decision tree algorithms. These models help calculate the failure frequency of bearings in power generation equipment, summarize the characteristics of failure types and detect the operation status of wind power equipment through IoT. In addition, they can also generate the point inspection data and evaluate the equipment status. The findings demonstrate that the average communication distances of the designed remote diagnosis method and the other two remote diagnosis methods are 587.46 m, 435.61 m, and 454.32 m, respectively, indicating its application value.

• Journal of information and communication convergence engineering
• /
• v.15 no.1
• /
• pp.37-42
• /
• 2017

The constrained application protocol (CoAP) can be used for remotely controlling various sensor devices in Internet of Things (IoT) networks. In CoAP, to support the handover of a mobile sensor device, service discovery and message transmission needs to be repeated, although doing so would increase the handover delay significantly. To address this limitation of CoAP, a centralized CoAP scheme has been proposed. However, it tends to result in performance degradation for an inter-domain handover case. In this letter, we propose a distributed CoAP handover scheme to support the inter-domain handover. In the proposed scheme, a distributed mobility agent (DMA) is used for managing the location of mobile sensors in a domain and performing handover control operations with its neighboring DMAs in a distributed manner. A performance comparison reveals that the proposed scheme offers a performance improvement of up to 29.5% in terms of the handover delay.

• Journal of information and communication convergence engineering
• /
• v.17 no.3
• /
• pp.198-204
• /
• 2019

In this study, the author introduces a supply-chain management (SCM) solution that connects suppliers, manufacturers, customers, and other companies within a transactional relationship to enable efficient inventory management and timely product supply, which ultimately maximizes corporate profits. This proposed solution exploits Fourth Industrial Revolution technologies, such as artificial intelligence (AI) and the Internet of Things (IoT), which provide solutions to complex management issues generated by the broader market. The goal of the current study was to develop an advanced and intelligent smart SCM solution that complies with logistics standards, to enhance the visibility, safety, and efficiency of a supply chain made up of manufacturers and suppliers. This smart SCM solution aims at maximizing corporate profits through efficient inventory management and timely supply of products, and solves the complex management problems caused by operating within a wide range of markets.

• Journal of information and communication convergence engineering
• /
• v.16 no.1
• /
• pp.60-65
• /
• 2018

The Internet of Things (IoT) is happening now. By implementing IoT, we can build smart home system. Smart home is an application that is a combination of technology and services that specialize in the home environment with specific functions aimed at improving the efficiency, comfort and security of the occupants. Smart homes filled with connected products are loaded with possibilities to make our lives easier, more convenient, and more comfortable. This intelligent home system uses a microcontroller to process functions that provided by smart home system, such functions as RFID for door access and PIR sensors for motion detection. By using Android users could control the sensors anytime and anywhere. Microcontroller used is Arduino IDE with WeMos D1R2 board. Based on the testing process, there was a successful communication between the components of the device, sensors, and Android devices. Users could open or close the solenoid, users can also turn off or turn on electronic devices using Android.

• Journal of Multimedia Information System
• /
• v.2 no.4
• /
• pp.327-332
• /
• 2015

Recently, as microcomputers and sensors have been miniaturized due to dropdown of their market rates, this lead to a favorable environment for implementing the Internet of Things. Smart clothing refers to a system which can be wearable or portable, and allows people to communicate or conduct sensing. Applying the Internet of things, the role of the server computer is to receive and process data obtained from the sensor. An ordinary PC can act as a server but during the implementation of IoT, a PC has limited application due to a large size and the inconvenient portability. This study proposes a model that allows a variety of functions while implementation with the server from the sensing using the Arduino and Raspberry Pi. If we apply this proposed model, everyone can easily and inexpensively experience mobile IoT system.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.01a
• /
• pp.83-84
• /
• 2016

IT 산업의 발달에 따라 기기간의 네트워크 구조도 단순한 중앙 제어 방식에서 필요에 의해 다양한 형태로 발전해왔다. 이러한 네트워크의 복잡화는 유지 보수의 어려움을 발생시켰고, 이를 완화하기 위해 등장한 것이 소프트웨어 정의 네트워크이다. 이러한 소프트웨어 정의 기법을 활용한 이더넷 장비의 효율성이 입증되자 해당 기법을 센서 네트워크 분야에 적용하려는 연구들이 진행되고 있다. 하지만 이더넷과 센서 네트워크는 주소 체계나 프로토콜 등 통신 및 구성이 상이하기 때문에, 기존의 소프트웨어 정의 네트워크를 단순히 적용하기만 해서는 구현이 불가능하다. 본 논문에서는 Internet of Things 분야의 소프트웨어 정의 네트워크 구축에 필요한 요소들과 관련 연구의 동향에 대해 서술하고자 한다.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.487-494
• /
• 2019

In this paper, we designed IOT(Internet of Things) based hydroponic plant factory in order to avoid the effects of fine dust penetrating into the soil, and proposed the PLC(Programmable Logic Controller) control methods. The designed plant factory could monitor the density of oxygen, the density of nutrient solution, temperature and humidity through touch screen and smart phone, and control the heater and cooler, ventilation and dehumidifier, and wavelengths of LEDs to grow plant in appropriate environments.

• Asia Marketing Journal
• /
• v.24 no.1
• /
• pp.29-38
• /
• 2022

Despite the diverse benefits of smart home Internet of Things (IoT) services, the biggest obstacle to the actual usage of those services is concern about privacy. However, little research has investigated the impact of privacy control on users' intention to use smart home services. Based on communication privacy management theory and privacy calculus theory, this study investigates how privacy control options affect users' perceived benefits and costs and how those perceptions affect individuals' intentions to use smart home services by conducting an experiment. Our results showed that smart home privacy control options decreased perceived benefits and increased perceived costs. The perceived benefits and costs significantly affected the intention to use smart home security services. More intriguingly, the effect of perceived benefit was found to be stronger than that of the expected cost. This research contributes to the field of IoT and smart home research and provides practitioners with notable guidelines.

• Journal of Information Processing Systems
• /
• v.18 no.6
• /
• pp.784-793
• /
• 2022

Grid-connected distributed power generation has been widely used in green energy generation. However, due to the distributed characteristics, distributed power generation is difficult to be dynamically allocated and monitored in the electrical control process. In order to solve this problem, this research combined the Internet of Things (IoT) with the automatic control system of electrical engineering to improve the control strategy of the power grid inverter according to the characteristics of the IoT system. In the research, a connection system of the power grid inverter and the IoT controller were designed, and the application effect was tested by simulation experiments. The results showed that the power grid inverter had strong tracking control ability for current and power control. Meanwhile, the electrical control system of the IoT could independently and dynamically control the three-phase current and power. The given value was reached within 50 ms after the step signal was input, which could protect the power grid from being affected by the current. The overall system could realize effective control, dynamic control and protective control.

• Asia pacific journal of information systems
• /
• v.29 no.3
• /
• pp.407-413
• /
• 2019

This editorial on 'Smart Services and Internet of Things (IoT)' focuses on the topics related to the applications of IoT to consumer products and services, which have become 'smarter' thanks to IoT. This special issue explores, in different ways, the phenomena of smart services and the role of IoT in business innovation across different contexts such as product-service system, car auction, tourism industry, communicating platform, online travel agency, self-service retail, and bike sharing. We hope that this special issue will provide a significant step forward in enabling researchers and practitioners to understand smart services and IoT.