• 대한의용생체공학회:의공학회지
• /
• 제16권2호
• /
• pp.129-138
• /
• 1995

최근 방사선 치료에서 가속기를 이용한 고에너지, 고선량율 X-선과 전자선을 암환자 치료에 이용하고 있다. 치료시 방사선 조사선량의 5% 증감은 방사선 치료성적의 성패를 직접적으로 간여하고 있다고 국제 방사선 규정협회는 규정하고 있다. 본 논문에서는 방사선 치료에 영향을 미치는 빔 파라메터의 변동여부를 빠르고 간편하게 검출해 낼 수 있는 장치를 범용 실리콘 다이오드를 이용하여 제작한후 그 특성에 관해 고찰해 보았다. 13개 다이오드를 X-축 및 Y-축에 각각 7개씩 배열한 후 조사영역의 빔의 대칭도, 편평도, 안정성 등을 검출하여 보았고 방사선 손상에 대한 고찰, 일정기간 후의 변화량, 에너지 의존성 및 심부량 백분률등을 기존의 측정방법인 기체전리함을 이용한방법, 필름을 이용한 방법, 반도체 소자를 이용한 방법과의 값과 비교 분석하였다.

• 한국환경과학회지
• /
• 제7권4호
• /
• pp.523-530
• /
• 1998

Precipitation samples were collected at sixteen sites in Northeast Asia from June 1995 to February 1997, and were analysed for the anions $SO_4^{2-}$, $NO_3^-$and $Cl^-$ and for the cartons $Na^+, NH_4^+, K^+, Mg^{2+} and $Ca^{2+}$in addition to pH and conductivity measurements. The quality assurance of chemical composition data was checked by considering the ion balance evaluating by 1 h 1 value and the conductilfty balance. The sum of cation concentrations were slightty greater than the sum of anion concentraions. For the anions, $SO_4^{2-}$ clearly dominates in most of sampling states whereas $Cl^-$ is more abundant in coast and rural sites In. Tapan. For the cations. $Ca^{2+}$ and $NH_4^+$ are generally the more abundant tons except when sources of Na+ exist. The contribution rate of nss-$SO_4^2-and NO_3^-$ to acidity are about 70% and 10-30%. respectively. The neutralizing capacity by a major neutralizing cations such as $NH_4^+$ and nuts -$SO_4^2$. are above 98%(heavy polluted and urban sites in China), above 70%(urban sites in Japi,n and in Korea, coast sites In Chinas and above 60%(rural sites in Japan and in Korea), respectively.

• 유통과학연구
• /
• 제17권2호
• /
• pp.35-42
• /
• 2019

Purpose - There is little research on the market of foreign infant education materials. So, it is needed to deeply examine the development and preference factors of foreign infant education materials. Therefore, this study presents a future method and model for analyzing the important variables of buying foreign infant education materials. Research design, data, and methodology - The conjoint analysis method and model of this paper is used as follows. Conjoint analysis method is possible to derive the attributes to be analyzed through the model of the preferred factors, and then to derive the sub-attributes of the attributes. Results - This study derived preference attributes between brand benefit, equity (brand image, loyalty, awareness), distribution network (department store, specialty stores, discount store, internet mall), and service quality (tangibles, reliability, responsiveness, assurance, empathy) in infant education materials conjoint model. Conclusions - Since the opening of the education market in Korea, parents have a high education level due to low birth rate. The advantages of the conjoint analysis method have been extended to the study of infant education materials. Based on this, this paper will identify important attributes that are considered in preference of foreign infant education materials and help to establish and implement future marketing strategies.

• 한국항해학회지
• /
• 제22권1호
• /
• pp.63-77
• /
• 1998

It is one of the most important factors Seafarers Ducation Quality Assurance and Management in Higher Maritime Educational Institution. The educational process and result of Higher Maritime Educational Institution should be evaluated according to the 1995 Amendments to the International Convention on Standards of Training, Certification and Watchkeeping for Seafarers(STCW), 1978. Actually above-mentioned evaluation is deemed to make foundation in order to enhance the efficiency of shipboard education by surveying the satisfaction of shipboard training for nautical part cadets by the group. In this paper, we carried out the questionnaire survey to study satisfactory value and the reason of dissatisfaction of 113 cadets being trained on board the Training Ship in Maritime College of Korea Maritime University(K. M. U.). The results were calculated by frequency and percentage ; the significance of difference among Department groups like Maritime Transportation Science, Maritime Police and Ship Operating Systems Engineering was analysed by $X^2$ inspection. The major results of above analysis were as follows : First training chance for dadets was very little for being overflowed on board the training ship of the K. M. U. Second, special type of Training Ship HANBADA and HANNARA made the adaptability to merchant vessel's handling restricted. Third, cadets could not manage ratings directly, therefore the education in regard to seafaring management was limited to the theoretical instruction which leads to the low level of satisfaction. And lastly, low value of satisfaction for Drydocking Education in Shipyard was caused by cadet's leaving the Training Ship on account of the safety problems including ship and cadets.

• 신재생에너지
• /
• 제17권2호
• /
• pp.24-31
• /
• 2021

Renewable energy has become more popular with the increase in the use of solar power. Consequently, the disposal of defective and old solar panels is gradually increasing giving rise to a new problem. Furthermore, the efficiency and power output decreases with aging. Researchers worldwide are engaged in solving this problem by developing eco-module technologies that restore and reuse the solar panels according to the defect types rather than simple disposal. The eco-module technology not only solves the environmental problem, but also has economic advantages, such as extending the module life. Replacement of encapsulants contributes to a major portion of the module maintenance plan, as the degradation of encapsulants accounts for 60% of the problems found in modules over the past years. However, the current International Electrotechnical Commission (IEC) standard testing was designed for the commercialization of solar modules. As the problem caused by long-term use is not considered, this method is not suitable for the quality assurance evaluation of the eco-module. Therefore, to design a new accelerated test, this paper provides an overview of EVA degradation and comparison with the IEC and accelerated tests.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.255-261
• /
• 2022

A reliable and well-characterized dosimetry system which is traceable to the international measurement system, is the key element to quality assurance in radiation processing with cobalt-60 gamma rays, X-rays, and electron beam. This is specifically the case for health-regulated processes, such as the radiation sterilization of single use medical devices and food irradiation for preservation and disinfestation. Polyethylene is considered to possess a lot of interesting dosimetric characteristics. In this work, a detailed study has been performed to determine the dosimetric characteristics of a commercialized high-density polyethylene (HDPE) film using Fourier transformed infrared spectrometry (FTIR). Correlations have been established between the absorbed dose and radiation induced infrared absorption in polyethylene having a maximum at 965 cm^-1 (transvinylene band) and 1716 cm^-1 (ketone-carbonyl band). We have found that polyethylene dose-response is linear with dose for both bands up to1000 kGy. For transvinylene band, the dose-response is more sensitive if irradiations are made in helium. While, for ketone-carbonyl band, the dose-response is more sensitive when irradiations are carried out in air. The dose-rate effect has been found to be negligible when polyethylene samples are irradiated with electron beam high dose rates. The irradiated polyethylene is relatively stable for several weeks after irradiation.

• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.153-158
• /
• 2017

Procurement system of public construction projects in Japan is changing with diversity in rapid pace. The quality assurance and risk management of construction projects should be more certain as the projects are turning into larger scale and more complexed. The clients in the public sector will want to make the relation of responsibility among the client, the designer (architects and engineers), and contractor clearer in terms of role and risk. Public-Private Partnership (PPP) is one of the methods for collaboration of the public sector and the private sector in public construction projects where the public utilizes the ability and suggestion of the private. Private Finance Initiative (PFI), Design-Build-Operate (DBO), market testing, designated manager system, outsourcing of tasks in local governments are well-known as examples of PPP in Japan. Indeed, there is an obvious trend that Design-Build (DB) is adopted in public construction projects in many countries including Japan. In this paper, the public construction projects in various procurement systems are surveyed and analyzed. They are not limited within the traditional procurement, Design-bid-Build, a separate order system of design and construction. Design-Build or PFI are adopted. In particular, contract by wide range including maintenance of equipment can be found. On the other hand, modification from originally typical PFI is taking place, such as concept design and project finance are removed from the roles and the tasks of the special purpose company (SPC) in PFI. Standard roles and tasks in a construction project are modeled in this paper.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.523-526
• /
• 2015

In recent years, building commissioning has often been part of a standard delivery practice in construction, particularly in the high-performance green building market, to ensure the building is designed and constructed per owner's requirements. Commissioning, therefore, intends to provide quality assurance that buildings perform as intended by the design and often helps achieve energy savings. Commissioning, however, is not as widely adopted as its potential benefits are perceived. Owners are still skeptical of the cost-effectiveness claims by energy management and commissioning professionals. One of the issues in the current commissioning practice is that not every project is guaranteed to benefit from the commissioning services. This, coupled with its added cost, the commissioning service is not acquired with great acceptance and confidence by building owners. To overcome this issue, this paper presents a unique methodology to enhance owner's predicting capability of the degree of success of commissioning service using the Bayesian theorem. The paper analyzes a situation where a future building owner wants to use a pre-commissioning in an attempt to refine the success rate of the future commissioned building performance. The author proposes the Bayesian theorem based framework to improve the current commissioning practice where building owners are not given accurate information how much successful their projects are going to be in terms of energy savings from the commissioning service. What should be provided to the building owners who consider their buildings to be commissioned is that they need some indicators how likely their projects benefit from the commissioning process. Based on this, the owners can make better informed decisions whether or not they acquire a commissioning service.

• 무역학회지
• /
• 제42권2호
• /
• pp.319-344
• /
• 2017

국제표준인증은 제품 및 서비스를 공급하는 공급자의 국제표준인증 기준에 만족하는 정도를 평가하여 공급자의 품질보증능력과 신뢰성을 인정함으로써 다양한 분야에서 발생 가능한 국제무역규제를 해소하고 글로벌 파트너십의 네트워크 강화에 중요한 기여를 하고 있다. 따라서 본 연구에서는 국제표준인증을 획득한 우리나라 수출입 제조기업 153개 기업을 대상으로 설문을 수거하여 연구를 진행하였고, 연구방법은 구조방정식모형(Structural equation model)으로 실증분석을 실시하였다. 본 연구의 가설검증 결과 다음과 같은 연구결과를 도출하였다. 첫째, 글로벌 무역공급망 통합에 있어서 국제표준인증 요인 중 자원관리 요인이 CRM만족도에 긍정적인 영향을 미쳤다. 둘째, 국제표준인증 요인 중 측정, 분석 및 개선 요인이 CRM만족도에 긍정적인 영향을 미쳤다. 셋째, CRM만족도는 기업의 경영성과에 긍정적인 영향을 미치는 것으로 나타났다. 본 연구를 통하여 우리나라 수출입 기업들은 글로벌 무역공급망관리에서 글로벌 비즈니스 파트너십의 국제표준인증 획득 여부는 기업의 사업성과를 향상시키는데 있어서 중요한 요인으로 작용한다는 연구결과가 도출되었다.

• 한국식품과학회지
• /
• 제51권3호
• /
• pp.221-226
• /
• 2019

쌀가루 첨가면에 패각분말을 0.1, 0.2, 0.3, 0.4%로 수준으로 첨가하여 최적 패각분말 첨가량을 조사하고, 밀가루 알카리제 첨가면과 품질 특성에 관하여 비교하였다. 면에 쌀가루를 첨가할 경우 밀가루면 대비 L값과 b값이 높아지는 경향을 보여 면의 외관이 밝아지는 것을 확인 하였다. 쌀가루를 첨가면의 조리 특성은 면의 수분흡수율이 높아져 수율 향상이 이루어질 수 있으나, 조리 과정 중 탁도도 같이 높아져 면의 용출 작용이 병행되는 것을 알 수 있었다. 패각분말의 첨가량이 높아질수록 면의 색도, pH, 수분흡수율, 탁도가 높아지는 경향을 보였으나, 패각분말의 함량이 0.3%를 초과하게 되면 경도, 탄력성, 씹힘성, 신장성이 떨어지는 경향을 보였다. 이는 알칼리제의 특성으로 일정수준 이상을 첨가하면 면에 형성된 네트워크를 저해하여 면의 조직감을 떨어뜨리는 작용을 하는 것으로 생각된다. 이 연구에서는 쌀가루면에 패각분말 0.2%를 첨가 할 때 알칼리제첨가 밀가루면과 유사한 물성을 나타내었다. 하지만 이 이상의 패각분말을 첨가할 경우 외관은 좋아질 수 있으나, 면의 조직감은 더 떨어지는 것으로 나타났다. 따라서 본 연구결과는 쌀면류 및 합성 첨가물 활용의 기초자료로 제공되어 향후 연구 수행에 도움을 줄 수 있을 것으로 판단됩니다.