• 한국운동역학회지
• /
• 제26권2호
• /
• pp.237-242
• /
• 2016

Objective: The purpose of this study was to compare the joint movements and muscle activities of novices according to pedal type (flat, clip, and cleat pedal). Method: Nine novice male subjects (age: $24.4{\pm}1.9years$, height: $1.77{\pm}0.05m$, weight: $72.4{\pm}7.6kg$, shoe size: $267.20{\pm}7.50mm$) participated in 3-minute, 60-rpm cycle pedaling tests with the same load and cadence. Each of the subject's saddle height was determined by the $155^{\circ}$ knee flexion angle when the pedal crank was at the 6 o'clock position ($25^{\circ}$ knee angle method). The muscle activities of the vastus lateralis, tibialis anterior, biceps femoris, and gastrocnemius medialis were compared by using electromyography during 4 pedaling phases (phase 1: $330{\sim}30^{\circ}$, phase 2: $30{\sim}150^{\circ}$, phase 3: $150{\sim}210^{\circ}$, and phase 4: $210{\sim}330^{\circ}$). Results: The knee joint movement (range of motion) and maximum dorsiflexion angle of the ankle joint with the flat pedal were larger than those of the clip and cleat pedals. The maximum plantarflexion timing with the flat and clip pedals was faster than that of the flat pedal. Electromyography revealed that the vastus lateralis muscle activity with the flat pedal was greater than that with the clip and cleat pedals. Conclusion: With the clip and cleat pedals, the joint movements were limited but the muscle activities were more effective than that with the flat pedal. The novice cannot benefit from the clip and cleat pedals regardless of their pull-up pedaling advantage. Therefore, the novice should perform the skilled pulling-up pedaling exercise in order to benefit from the clip and cleat pedals in terms of pedaling performance.

• 한국터널지하공간학회 논문집
• /
• 제14권6호
• /
• pp.575-593
• /
• 2012

본 연구는 국제공동연구인 SKB Task 8에 대한 간단한 소개와 더불어, Task 8a 모델문제를 중심으로 유한차분과 유한체적법의 복합적 해석코드(integrated finite difference method)인 TOUGH2를 이용하여 벤토나이트 완충재와 현장암반의 수리학적 거동특성을 살펴보았다. 이를 위해 벤토나이트-암반의 상호작용을 중심으로 현장암반의 절리유무에 따른 완충재 내의 압력분포 변화 및 재포화 특성을 분석하였고, 벤토나이트 고유 특성인 높은 모세관 압력과 현장암반 내 절리영향을 TOUGH2 코드를 통해 성공적으로 구현하였다. 연구결과, 현장암반 내 절리를 고려함으로써 완충재의 포화속도는 약 2.5~12배 가량 차이가 발생하였으며, 무결암 및 절리암반 모두 완충재의 하단부가 상단부에 비해 포화속도가 상대적으로 빠르게 진행되었음을 확인할 수 있었다. 본 연구결과는 고준위폐기물 처분공 내의 완충재 설계와 관련하여, 완충재 포화 시기예측 및 최적 소요두께 결정 등에 중요한 자료로 활용될 수 있을 것으로 예상된다.

• 자원환경지질
• /
• 제55권5호
• /
• pp.497-510
• /
• 2022

포항 달전리 주상절리(천연기념물 제415호)에서 발생하고 있는 낙석의 원인을 파악하기 위해 2018년 1월부터 2022년 8월까지 월별 모니터링과 3차원 스캔 측량, 전기 비저항탐사를 실시하였다. 약 5년간 주상절리대에서 떨어져 나온 낙석은 총 3,231개이며, 낙석의 크기(길이)는 20cm 이하가 1,521개(47%)로 가장 많고, 20~30cm는 978(30.3%), 30cm 이상은 732개(22.7%)가 발생하였다. 2018년부터 연도별 낙석 발생 개수는 감소하는 반면, 30cm 이상의 낙석 발생 빈도는 증가하는 경향을 보인다. 대규모의 낙석은 해빙기(3월~4월)와 장마기(6월~7월)에 주로 발생하였으며, 누적강우량과 낙석 발생 관계 분석에서 3~4일 간의 누적강우량도 낙석 발생에 밀접한 관계가 있는 것으로 나타났다. 주상절리 내의 사면물질(충진물)을 대상으로 한 XRD 분석에서 팽창성 점토광물인 스멕타이트와 일라이트가 관찰되었으며 전기비저항탐사에서 단층파쇄대가 존재하는 것이 확인되었다. 또한, 확인된 단층파쇄대와 3D 정밀측정을 통해 분석된 최대 침식지점이 무인카메라에서 관찰된 주 낙석 발생 지점과 일치하였다. 따라서 포항 달전리 주상절리의 낙석 발생 주요 원인은 내부요인(단층파쇄대와 절리의 발달, 암석의 풍화, 팽창성 점토광물의 존재)과 외부요인(강우량, 해빙기 급속한 융해현상)이 복합적으로 작용하여 대규모 낙석을 발생하는 것으로 판단된다. 반면, 일부에서 지속적으로 제기 되었던 포항-경주 지진은 주요 원인이 아님이 확인되었다.

• 대한전자공학회논문지SP
• /
• 제47권3호
• /
• pp.87-95
• /
• 2010

오디오 신호를 무손실 압축하여 휴대용 멀티미디어 기기에서 최고의 오디오 품질을 제공하는 기기들이 등장하고 있으며, 무손실 오디오 압축을 위한 기술에서는 2006년 MPEG-4 audio lessless coding(ALS)와 MPEG-4 scalable lossless coding(SLS)가 국제 표준으로 채택 되었다. 2009년에는 MPEG에서 최대 스테레오 음원까지만 지원하는 MPEG-4 ALS simple profile을 정의하였다. 표준화된 무손실 오디오 코덱이 휴대용 멀티미디어 기기에서 널리 이용되기 위해서는 휴대용 멀티미디어 기기에서 가장 널리 쓰이는 스테레오 조건에서 낮은 복잡도를 보여야 한다. 하지만 기존 연구에서는 MPEG-4 ALS의 압축률을 향상시키거나, 혹은 다채널 환경에서의 복잡도를 개선하기 위한 연구들이 주로 이루어졌다. 본 논문에서는 MPEG-4 ALS 인코더의 복잡도와 압축률을 분석하고, 이를 바탕으로 MPEG-4 ALS simple profile 조건에서 MPEG-4 ALS 인코더의 복잡도를 개선하기 위한 방법을 제안한다. 분석 결과 MPEG-4 ALS 인코더의 analysis 블록에서 전체 복잡도의 75% 발생하므로, 기존의 연구에서 개발된 저 복잡도 필터를 인코더에 적용하여 복잡도를 감소시키며, joint coding의 압축 효율과 여기 신호의 상호상관계수의 관계를 기반으로 joint coding 결정 방법을 제안한다. 제안된 방법과 저 복잡도 필터가 포함된 MPEG-4 ALS 인코더의 성능은 MPEG-4 conformance test 파일과 일반 음악 파일을 이용하여 복잡도 및 압축률로써 평가된다. 실험 결과 제안된 방법이 적용되었을 경우 압축률은 유사하면서 인코더 복잡도가 24% 감소한다. 이를 통해 본 논문에서 제안된 방법이 MPEG-4 ALS 인코더의 복잡도 감소에 탁월한 성능을 가짐을 보였다.

• 한국유통학회지:유통연구
• /
• 제17권3호
• /
• pp.93-113
• /
• 2012

갈등에 대한 다양한 연구가 이루어졌음에도 불구하고, 갈등해결을 통한 관계학습의 관점에서 조직적(interorganizational)으로 접근한 연구는 매우 부족한 실정이다. 본 연구에서는 갈등해결 매커니즘을 통해, 유통경로 구성원들이 어떻게 관계학습을 구축할 수 있는지, 그리고 이것들이 경로관계의 성과에 어떠한 영향을 미치는지 살펴보고 있다. 이와 같은 목적으로 국내 유통업체의 협력업체 영업담당자 490명을 대상으로 설문조사를 실시한 결과, 갈등해결에 있어 협력행동은 관계학습의 세 가지 과정인 정보공유, 공동이해와 해석, 관계특유기억 모두를 강화한 반면, 회피행동은 정보공유만 약화시키는 것으로 나타났다. 공동이해와 해석, 관계특유기억은 유통경로의 성과인 효과성과 효율성을 강화시킨 반면, 정보공유는 성과에 영향을 미치지 않았다.

• International Journal of Korean Welding Society
• /
• 제3권1호
• /
• pp.34-38
• /
• 2003

It has been used many kinds of horizontal butt-welding methods at block-to-block erection stage in shipbuilding companies. For examples, some companies use conventional FCAW process with one side or both sides groove joint welding, others use carriage with torch holder type mechanized welding method. Although lots of efforts were done until now, some problems in quality and productivity still remain in ship's hull welding. In this study, we have attempted to raise productivity and quality on horizontal position of welding with following 3 items. 1) Prepare groove condition with no root gap for making easy fit-up work. 2) Develop improved MAG (100% $CO_2$ gas shielding) welding process with solid wire for making sound root bead from one side. 3) Develop and apply quite new automatic welding carriage. The stability of new welding process was confirmed by conducting mechanical tests of weldments to verify the soundness of weldments.

• 국제초고층학회논문집
• /
• 제9권2호
• /
• pp.155-166
• /
• 2020

To connect exterior reinforced concrete (RC) columns with the steel belt truss, the gusset plates are welded to the steel plates embedded in the RC column. Then, the concrete around an embedded plate is very likely to be damaged by the heat input from a long-time (6 to 48 hours) welding of the embedded and gusset plates at a joint between RC columns and steel belt truss. However, very few studies have assessed the concrete damage caused by the welding heat between embedded and gusset plates, and no clear onsite solution has been found. In this paper, experimental tests have been carried out on 4 full-scale specimen to analyze the effect of long-time (about 6 hours) onsite welding (1-side welding and 3-side welding) between a gusset plate and an embedded plate in high strength concrete with compressive strength of 55 MPa and 80 MPa on RC columns. The effect of the long-time welding heat of embedded and gusset plates, which are used in real high-rise building construction sites, on concrete is analyzed in terms of the following three items: 1) temperature distribution, 2) pattern and characteristics of cracks, and 3) effect of the cracks on the compressive strength of RC column. Based on the experimental results, even though the heat input up to about 150? from the long-time onsite welding on the high-strength concrete column for the joint could result in concrete cracks in a radial form, it is found that the welding cracks have no effect on the axial stiffness and strength of the concrete column.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권3호
• /
• pp.348-363
• /
• 2013

The use of I-Core sandwich panel has increased in cruise ship deck structure since it can provide similar bending strength with conventional stiffened plate while keeping lighter weight and lower web height. However, due to its thin plate thickness, i.e. about 4~6 mm at most, it is assembled by high power $CO_2$ laser welding to minimize the welding deformation. This research proposes a volumetric heat source model for T-joint of the I-Core sandwich panel and a method to use shell element model for a thermal elasto-plastic analysis to predict welding deformation. This paper, Part I, focuses on the heat source model. A circular cone type heat source model is newly suggested in heat transfer analysis to realize similar melting zone with that observed in experiment. An additional suggestion is made to consider negative defocus, which is commonly applied in T-joint laser welding since it can provide deeper penetration than zero defocus. The proposed heat source is also verified through 3D thermal elasto-plastic analysis to compare welding deformation with experimental results. A parametric study for different welding speeds, defocus values, and welding powers is performed to investigate the effect on the melting zone and welding deformation. In Part II, focuses on the proposed method to employ shell element model to predict welding deformation in thermal elasto-plastic analysis instead of solid element model.

• 수산경영론집
• /
• 제33권1호
• /
• pp.87-107
• /
• 2002

The sea of north-east Asia is biologically interrelated and one country's mishap in the management of fisheries could have a critical effect upon the other. Accordingly under the TAC system adopted by all the countries of Korea, Japan and China, the mismanagement o( trans-boundary fish stocks under the provisional fisheries agreement prior to the delimitation of EEZ could lead to the irrevocable depletion of fisheries resources in case of absence of close cooperation among the countries concerned. To tackle the problems above, it is necessary, from a short term perspective, to promote the combined efforts to do researches on fisheries resources, find ways to improve the transparency of fisheries management, adjust the fisheries management regulations of each country, standardize fishing gears and methods, and exchange fisheries-related statistics and data for socio-economic analysis and strengthen joint research activities for the mutual benefits. From a longer term prospective, regional fisheries organization need to be set up to oversee the whole area of north-east Asian sea. The organization as such could play a role in adjusting the conflicting interests of Korea, Japan and China, and efficiently manage the fisheries resources, which is complex and challenging in nature. In addition, unlike China, the historical fisheries relationship between Korea and Japan, spirit of reciprocity and the Article 62 of the United Nations Convention On the Law Of Sea need to be taken into account when seeking for fisheries cooperation between the two countries through the international specialization. In other words, the data obtained through the joint researches on the fisheries resources for the specific ocean along with such factors as capital, labor, fisheries technology and consumption of fish products could be used to assign the specific sector of fisheries to the country who has a comparative advantage, thus achieving the mutually benefiting results Up to the present, concerted efforts by Korea, Japan and China on the fisheries cooperation have been consistently made, but the results have yet to be materialized, It is also beyond doubt that governmental consultations among the countries should be made on a consistent basis, but non-governmental organizations' exchanges and related joint researches will more likely help bring about the desired fruition in a shorter time.

• 한국의류산업학회지
• /
• 제18권3호
• /
• pp.272-281
• /
• 2016

From the year 2000 on, Seoul has aimed to be a fashion city, and thus has been supporting young designers through Seoul Fashion Creative Studio, Generation Next, Le Dome, Concept Korea, etc. London is famous for nurturing young designers through the joint help of government, schools and industries: Alexander McQueen, Christopher Kane and Peter Pilotto are successful cases. Therefore, this research aims to suggest a direction for policies aimed at helping young designers in the international market, on the basis of London's nurturing programs and ideas from a literature review and case studies. The results are below. Firstly, a step-by-step supporting program is recommended. Secondly, long-lasting, sustainable programs are considered essential to support designers after the end of their contracts. Thirdly, practical assistance is preferred to monetary funding in order to lighten the designers' lot and in the interests of transparency. The mentoring service should be strengthened for the designers to eventually become independent. The support should be tailor-made according to items. Fourthly, the supporting programs should be promoted. Fifthly, government and industries should collaborate. Sixthly, 'de minimis' against overlapped support should be legislated. For these, the change of supporting method can be helpful; an independent administrative organisation plans and collects funds from governments and companies. Through these programs and any subsequent studies, Seoul could become a fashion city where young designers play active roles at a global level.