• International Journal of Automotive Technology
• /
• v.8 no.6
• /
• pp.745-752
• /
• 2007

In this study, the effects of flexible bodies in vehicle suspension components were investigated to enhance the accuracy of multibody dynamic simulation results. Front and rear suspension components were investigated. Subframes, a stabilizer bar, a tie rod, a front lower control arm, a front knuckle, and front struts were selected. Reverse engineering techniques were used to construct a virtual vehicle model. Hard points and inertia data of the components were measured with surface scanning equipment. The mechanical characteristics of bushings and dampers were obtained from experiments. Reaction forces calculated from the multibody dynamics simulations were compared with test results at the ball joint of the lower control arm in both time-history and range-pair counting plots. Simulation results showed that the flexibility of the strut component had considerable influence on the lateral reaction force. Among the suspension components, the flexibility of the sub-frame, steering knuckle and upper strut resulted in better correlations with test results while the other flexible bodies could be neglected.

• International Journal of Concrete Structures and Materials
• /
• v.18 no.1E
• /
• pp.23-28
• /
• 2006

In this study, the general theory of fractality is discussed to provide a fundamental understanding of fractal geometry applied to heterogeneous material surfaces like pavement surface and rock surface. It is well known that many physical phenomena and systems are chaotic, random and that the features of roughness are found at a wide spectrum of length scales from the length of the sample to the atomic scales. Studying the mechanics of these physical phenomena, it is absolutely necessary to characterize such multi scaled rough surfaces and to know the structural property of such surfaces at all length scales relevant to the phenomenon. This study emphasizes the role of fractal geometry to characterize the roughness of various surfaces. Pavement roughness and rock surface roughness were examined to correlate their roughness property to fractality.

• International Journal of Concrete Structures and Materials
• /
• v.6 no.3
• /
• pp.199-207
• /
• 2012

Concrete is an economical construction material and for that reason it is widely used in buildings and infrastructures. The use of deicing salts, expansion joint failure, and freeze-thaw cycles have led to concrete bridge girders experiencing corrosion of steel reinforcement and becoming unsafe for driving. The goal of this research is to assess the effectiveness of current and possible repair techniques for the end region of damaged prestressed concrete girders. To do this, three American Association of State Highway and Transportation prestressed concrete girders were tested to failure, repaired, and retested. Three different repair materials were tested including carbon fiber, glass fiber, and surface mounted rods. Each different repair material was also tested with and without injected epoxy. Comparisons were then made to determine if injecting epoxy had a positive effect on stiffness and strength recovery as well as which repair type regained the largest percentage of original strength.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.12
• /
• pp.182-191
• /
• 2004

This study is focused on the development of a child human model, which is composed of skin, skeleton, joints and muscle, etc. The dimension of child outer skin is referred to anthropometric data from KRISS (Korea Research Institute of Standards and Science). The positions of joint and mass properties of body segments are calculated from ATB(Articulated Total Body) program, GEBOD. The properties of bones and muscles are obtained by the way of scaling from adult human model. To verify the developed human model, ROM simulation and sled test is conducted. Developed human model can be effectively applied to the evaluation of human injury in crash situation and development of child restraint system. The explicit finite element program $PAM-CRASH^TM$ was used to simulate six-year old child human model.

• International Journal of Safety
• /
• v.7 no.1
• /
• pp.35-38
• /
• 2008

The purpose of this study is to extract typical body shape of Korean VDT workers based on the three-dimensional Korean shape data and recommendation supported by Korea Occupational Safety & Health Agency during VDT task. Desirable desk heights and chair heights for the selection of the VDT working posture is proposed by analyzing moment, compression and joint shear for lumbar and spine of Korean adult(male and female). The desirable heights for desk and chair can be selected by the least load method during VDT tasks. In the current work the figures of Korean 50th percentile offered by CATIA-HUMAN are used as the average body type of the grown-ups and this research is accomplished with the recommended size of all working attitude such as the height of a monitor except for the height of desk and chair and the degree of watching the monitor.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.801-812
• /
• 2009

Recently, the cooperation between railway operators has been increased to maximize the efficiency of Asian railway network and international tourists, especially tourists to Asian region grow rapidly. But the cooperation in the rail tourism and leisure field has not yet been promoted. Therefore, this study suggests the development strategy of Asian Rail Pass like Eurail and InetRail Pass. It discusses mainly three Northeast Asian countries, Korea, China and Japan, which are very important area as the third world trade market and high rate of personal exchange. A joint research has to be conducted to feel out the practicability and profitability for the development of Asian Rail Pass. This study will publicize the necessity of Rail Pass in Asia.

• International Journal of Railway
• /
• v.6 no.4
• /
• pp.139-147
• /
• 2013

TSR (Trans-Siberian Railway) route is losing price competitiveness versus Deep Sea route in the transportation from East Asia to Europe, including Moscow. To further attracting the containers to the TSR route, it will be necessary (1) to keep competitive through rate, linked to fluctuating Deep Sea rate; (2) to strengthen speed advantage; (3) to enforce seamless transportation system, including simplified customs clearance procedures. In transportation to Central Asia from East Asia (Korea and Japan), TSR is competitive versus TCR (Trans-China Railway), depending on destinations. Korea has been the leader in revitalizing the TSR route since 2000. Key contributors were affluent export containers to Russia and Central Asia, port of Busan, efficient maritime transport network to Far East Russia, and Korean forwarders' persistent efforts for activating the market. Korea and Japan have a possibility of cooperation in using the TSR route efficiently, such as organizing a joint block train to a same destination.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.4
• /
• pp.21-25
• /
• 2005

In the dynamic analysis of a mechanism, if one or more of the components are flexible, then the simulation will not be accurate because of the violation of the rigid body assumption. Mode shapes are used to represent the dynamic behavior of an elastic structure. A modal synthesis method which uses a combination of normal modes, constraint modes, and attachment modes, was used to represent effectively the elastic deformation of a flexible multibody. Since the combination of these modes should be different for each type of connecting part, the modal synthesis method was studied for the various types of interconnecting joints. In addition, the analysis procedure for the flexible body was explained. A satellite system with flexible solar panels was chosen as an example to show the effectiveness of the proposed method.

• International Journal of High-Rise Buildings
• /
• v.8 no.3
• /
• pp.161-167
• /
• 2019

Making full use of material strength, maintaining sufficient ductility of structural components, and ensuring simple and robust connections are crucial to the development of steel-concrete composite structures. The steel-tubed concrete structure uses thin-walled steel tube to provide confinement, so that the strength and ductility of the concrete core are improved. Meanwhile, the thin-walled steel tube is terminated at the beam-column joint to avoid the local buckling problem and simplify the connections between steel tube and RC members. A brief overview of the development of steel-tubed concrete structures is presented. Through the discussion on the structural behavior of steel-tubed concrete and the introduction of typical practical projects, the prospects for future research are highlighted.

• Mycobiology
• /
• v.49 no.2
• /
• pp.133-141
• /
• 2021

A new fungus, Ophiocordyceps alboperitheciata, parasitic on the larva of Noctuidae (Lepidoptera) was identified from a survey of entomopathogenic fungi in Kunming Wild Duck Forest Park, Yunnan Province, China. It can be primarily distinguished from relatives by its longer fertile parts, sterile tips, superficial perithecia, narrower asci, and smaller septa of ascospores. As revealed from phylogenetic analyses inferred from nrSSU, nrLSU, tef-1α, rpb1, and rpb2 sequence data, O. alboperitheciata belongs to the Hirsutella citriformis clade in the genus Ophiocordyceps of Ophiocordycipitaceae, and forms a separated clade from other related species. The uniqueness of the taxon is significantly evidenced by both molecular phylogeny and morphology. Furthermore, the interspecific relationships in the H. citriformis clade are discussed.