• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1104-1110
• /
• 1996

To lessen the initial level of microorganism in kimchi, the preparation method of seasoning mixture was modified and electrolyzed acid-water was substitute for washing water and brine water. Changes in the microbial counts of the red pepper powder-garlic mixture prepared with red pepper powder, garlic and 4.8% (w/w) water (tap water and electrolyzed acid-water) of manufactured kimchi showed that coliform count and E. coli count were reduced to 93% and 98%, of the initial level in the tap water added red pepper powder-garlic mixture and 97% and 99% in the electrolzed acid-water added mixture after 6 hours of mix. After 24 hours of mix, no E. coli was recovered in borth mixtures. Microbial levels were revealed as $2.4{\times}10^5\;CFU/g$ for total count, $2.3{\times}10^5\;CFU/g$ for Lactobacillus count. $1.0{\times}10^2{\;}CFU/g$ of coliform count and $10^1\;CFU/g$ of E. coli count in the seasoning mixture prepared by the general method, and $4.2{\times}10^5\;CFU/g$ of total count, $4.0{\times}10^5CFU/g$ of Lactobacillus count, $1.0{\times}10^3\;CFU/g$ of coliorm count and $4.0{\times}10^2\;CFU/g$ of E. coli count in the mixture propared by the modified method. During fermentation at $10^{\circ}C$, the levels of total and Lactobacillus counts in kimchi prepared by the modified method were significantly lower than those of kimchi were recovered in kimchi prepared by the modified method, whereas there were at the level of $10^1\;CFU/g$ in kimchi prepared by the general method. The pH and acidity of kimchi prepared by the modified method were 4.66 and 0.54%, respectively, whereas those in kimchi prepared b the general method were 4.51 and 0.70%, respectively. But after 14 days of fermentation significant differences were not observed in the changes of microbial, pH and acidity for both kimchi.

• Journal of Gifted/Talented Education
• /
• v.18 no.3
• /
• pp.569-589
• /
• 2008

One of the main factors that affect the improvement of G/T education is the number and the level of quality of the professionals who are working for the gifted. The professionals vary depending on the role they play for the gifted from the classroom teacher, coordinator, to consultant. Since the legislation of the law for the enhancement of the gifted education in Korea, the in-service training for the classroom teacher has been expanded in number throughout the country. Nowadays, the gifted education is about to be expanded into the general school population, and it becomes more necessary that the training at the level of university graduate program be expanded beyond the short-term in-service training so far. In this vein, the number of universities in Korea that offer the staff development for the gifted education at the graduate level has been increased. However, the problem is whether those programs meet the need to produce the quality professionals. Based on this problem awareness, the study analyzed the graduate programs of 8 universities in Korea by comparing their course descriptions with the graduate-level training program standards of the United States and Europe. It was found that most of the universities fulfilled the areas that both standards commonly consider import, such as "concept and development of giftedness", "curriculum development for the gifted", "teaching methods for the gifted." However, the number of the offered subjects was different among the universities, which indicates that it is suspicious that the universities equally satisfy the areas both standards require. Furthermore, it was also found that the universities differ in satisfying the other standards, From these findings, several suggestions were made for the improvement of the university graduate programs in Korea.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.06a
• /
• pp.148-155
• /
• 2002

Multithreaded models improve the efficiency of parallel systems by combining inner parallelism, asynchronous data availability and the locality of von Neumann model. This model executes thread code which is generated by compiler and of which quality is given by the method of generation. But multithreaded models have the demerit that execution model is restricted to a specific platform. On the contrary, Java has the platform independency, so if we can translate from threads code to Java bytecode, we can use the advantages of multithreaded models in many platforms. Java executes Java bytecode which is intermediate language format for Java virtual machine. Java bytecode plays a role of an intermediate language in translator and Java virtual machine work as back-end in translator. But, Java bytecode which is translated from multithreaded models have the demerit that it is not secure. This paper, multhithread code whose feature of platform independent can execute in java virtual machine. We design and implement translator which translate from thread code of multithreaded code to Java bytecode and which check secure problems from Java bytecode.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.2
• /
• pp.93-104
• /
• 2015

Purpose: This study aimed to analyze the research trends of Ophthalmic Optic by targeting the papers published in the Journal of Korean Ophthalmic Optics Society and serve it as a basis for future researches. Methods: This study was conducted through a statistical analysis of the general characteristics, researcher characteristics, research characteristics and the research trends from total 990 papers, from the first issue to the last issue in 2014, published in the Journal of Korean Ophthalmic Optics Society. Results: Most common number of the authors of the published papers were two or three, respectively 26.8%. Most of the lead authors belong to the schools in Jeolla-do province (31.3%). Most of the educational system of which lead authors belong to is four-year-course system (43.0%). Most common research methods were optometric tests (40.9%). The most common subjects of researches are about the field of optometry (29.8%). The study shows that there were significant differences in the research methods depending on the school systems of the universities to which the lead authors belong (p=0.000). There also were significant differences in the school systems of the universities to which the lead authors belong, and research methods depending on the research subjects (p=0.000). There were meaningful differences according to the period divisions (1996 to 2004 and 2005 to 2014), i.e. the number of authors has been growing, and it is the same case for the number of the authors who belong to four-year-course universities (p=0.000). The number of papers on optometry and contact lenses have increase. The benefits of the research funds have also increased (p<0.005). In addition, the number of the lead authors in the Seoul and Chungcheong province have increased (p=0.000). Conclusions: For the development of the Ophthalmic Optics, it is necessary to broaden the stratum of researchers and deal with various research topics, And joint efforts between eyewear industry and academia and international cooperations are needed.

• Clinical and Experimental Pediatrics
• /
• v.53 no.3
• /
• pp.314-322
• /
• 2010

Purpose : Through a clinical and retrospective analysis of pediatric patients who visited the Regional Emergency Medical Center of Masan Samsung Hospital from January 2007 to December 2008, we characterized pediatric and adolescent emergency patients to improve emergency care in future. Methods : We reviewed the medical records of 14,065 pediatric patients below 19 years of age. Results : The male to female ratio was 1.5:1, and the most common age group was less than 3 years (49.6%). The peak month was May (10.0%), the peak day of the week was Sunday (24.7%), and the peak time of day was 20:00-0:59 (8.5%). There was no difference in the number of visits per day based on weather (sunny, rain [below 10 mm per day], snow, and fog) or daily temperature difference; however, visits increased on sandy, dusty days and decreased on rainy days with more than 10 mm of rain per day. Based on the international classification of disease (ICD)-10 system, the most common disease code was code R (symptoms, sign, and abnormal clinical laboratory finding) (31.5%), and the most common symptom was fever (13.1%). Final outcomes were discharged (73.8%), admitted (25.7%), transferred (0.4%), and expired (0.1%). In adolescent patients aged 15-9 years, the most common disease code was Injury & Poisoning (code S&T, 36.9%); the most common symptom was abdominal pain (9.6%). Conclusion : Pediatric patients visiting the emergency center were most likely to be male and under 3 years of age and to visit between 20:00 and 21:00 on Sundays and in May, and the most common symptom was fever. Differences between adolescents and pediatric patients showed that adolescents had a higher visiting rate with abdominal pain and a larger temperature difference.

• The Korean Journal of Pesticide Science
• /
• v.15 no.4
• /
• pp.463-470
• /
• 2011

This study was carried out to survey the residual characteristic of chlorpyrifos and estimate their residues in squash before harvest. The pesticide was sprayed onto the crop at the recommended and its double rates 10 days before the prearranged harvest and sampling was done at 0, 2, 3, 5, 6, 7 and 10 days after spraying. The amounts of the chlorpyrifos residue in the crop was analyzed by chromatographic method. Limit of detection (LOD) of chlorpyrifos was 0.005 mg/kg and its recovery ranged from 95.21 to 102.69%. The initial concentration of chlorpyrifos sprayed with recommended dose exceeded its MRL of 0.1 mg/kg but its concentration was less than its MRL 10 days after application. However its concentration in case of the double dose was over its MRL both immediately and 10 days after application. Biological half-lives of chlorpyrifos sprayed onto squash was 2.5 and 2.9 days at the recommended and double doses, respectively. Ten days later, the residual concentration of chlorpyrifos in squash was decreased substantially. The concentration of chlorpyrifos was estimated in squash at the given day using its regression equations. The estimated concentration of chlorpyrifos in case of application with recommended dose was below its MRL at 10 days after application but its concentration in case of application with double dose was over its MRL at 10 days of the prearranged harvest. The rate of the estimated daily intake (EDI) of chlorpyrifos to its acceptable daily intake (ADI) was 282% right after application but it decreased to less than 18% at 10 days of the prearranged harvest.

• The Journal of Korean Society for Radiation Therapy
• /
• v.16 no.1
• /
• pp.73-77
• /
• 2004

Purpose of the radio-therapy is maximize the radiation dose to the tumor while minimizing the dose to the critical organ. Carcinoma of the uterine cervix treatment are external irradiation or an interstitial brachtheraphy make use of isotope. Brachytherapy is a method of radiotherapy in advantage to achieve better local control with minimum radiation toxicity in comparison with external irradiation because radiation dose is distributed according to the inverse square low of gamma-ray emitted from the implanted sources. Authors make use of the patients data which 192Ir gives medical treatment intrcavity. Intracavitary radiation of the uterine cervix cancer, critical organ take $20\%$ below than exposure dose of A point in the ICRU report. None the less of the advice, Radiation proctitis and radiation cystitis are frequent and problematic early complications in patients treated with radiation for the uterine cervix cancer. In brachytherapy of uterine cervical cancer using a high dose rate remote afterloading system, it is of prime importance to deliver a accurate dose in each fractionated treatment by minimizing the difference between the pre-treatment planned and post-treatment calculated doses. Use of packing to reduce late complications intracavitary radiation of the uterine cervix cancer. Bladder and rectum changes exposure dose rate by radiotherphy make use of packing.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.1
• /
• pp.11-19
• /
• 2014

Purpose : To derive the most appropriate factors by considering the effects of the major factors when applied to the optimization algorithm, thereby aiding the effective designing of a ideal treatment plan. Materials and Methods : The eclipse treatment planning system(Eclipse 10.0, Varian, USA) was used in this study. The PBC (Pencil Beam Convolution) algorithm was used for dose calculation, and the DVO (Dose Volume Optimizer 10.0.28) Optimization algorithm was used for intensity modulated radiation therapy. The experimental group consists of patients receiving intensity modulated radiation therapy for the head and neck cancer and dose prescription to two planned target volume was 2.2 Gy and 2.0 Gy simultaneously. Treatment plan was done with inverse dose calculation methods utilizing 6 MV beam and 7 fields. The optimal algorithm parameter of the established plan was selected based on volume dose-priority(Constrain), dose fluence smooth value and the impact of the treatment plan was analyzed according to the variation of each factors. Volume dose-priority determines the reference conditions and the optimization process was carried out under the condition using same ratio, but different absolute values. We evaluated the surrounding normal organs of treatment volume according to the changing conditions of the absolute values of the volume dose-priority. Dose fluence smooth value was applied by simply changing the reference conditions (absolute value) and by changing the related volume dose-priority. The treatment plan was evaluated using Conformal Index, Paddick's Conformal Index, Homogeneity Index and the average dose of each organs. Results : When the volume dose-priority values were directly proportioned by changing the absolute values, the CI values were found to be different. However PCI was $1.299{\pm}0.006$ and HI was $1.095{\pm}0.004$ while D5%/D95% was $1.090{\pm}1.011$. The impact on the prescribed dose were similar. The average dose of parotid gland decreased to 67.4, 50.3, 51.2, 47.1 Gy when the absolute values of the volume dose-priority increased by 40,60,70,90. When the dose smooth strength from each treatment plan was increased, PCI value increased to $1.338{\pm}0.006$. Conclusion : The optimization algorithm was more influenced by the ratio of each condition than the absolute value of volume dose-priority. If the same ratio was maintained, similar treatment plan was established even if the absolute values were different. Volume dose-priority of the treatment volume should be more than 50% of the normal organ volume dose-priority in order to achieve a successful treatment plan. Dose fluence smooth value should increase or decrease proportional to the volume dose-priority. Volume dose-priority is not enough to satisfy the conditions when the absolute value are applied solely.

• Cartoon and Animation Studies
• /
• s.26
• /
• pp.1-30
• /
• 2012

The purpose of animation is to give interesting stories to an audience through motion. To achieve the purpose, over the past century since its inception, animation has adopted many kinds of technologies, and thus developed diverse narrative methods and visual expression techniques. In addition, with the advancement of expression techniques, all elements making up animation have gradually been systemized, and at the same time, have helped express the worlds beyond the reality. As a result, people have faced the era when an audience can watch everything imaginated by an animation director on a big screen. These days, more efforts have been made in order for the audience to feel much more than enjoy pictures moving in a frame. In other words, the purpose of the animation is changing from the passive viewing of animation to feeling and sensing stuffs through the animation. In the center of the changing process is 3D technology which gives new interesting to an audience. Sometime ago, a 3D animation movie was produced in Korea. But it did not bring out box-office profits, for it failed to give satisfaction to an audience who expected high perfection and beauty being able to be rivalled to those of international 3D animation movies. The failure is attributable to the fact that the domestic 3D animation production industry is merely in the early stage, and has not sufficient human resources, technology, and experiences in producing 3D animation films. Moreover, the problem is that most studies on 3D focus on the technologies related to reenactment, but that few studies on the images, which an audience directly faces, have been conducted. Under the domestic circumstance, the study on stereoscopic image screen of , a 3D stereoscopic animation film which was released in 2010 and has been seen as the best successful 3D stereoscopic animation, is worthwhile. Thus this thesis conducted theoretical consideration and case analysis focusing on the visual direction that creates the pictures to deliver abundant three dimensional effect so that it can be used as a basic data when producing high quality-domestic 3D animation and training professional labor forces. In the result, it was found that the 3D animation was not a new area, but the area which has been expanded and changed by applying the characteristics of 3D image based on the principles of the existing media aesthetics. This study might be helpful to establish the foundation of the theoretical studies necessary for producing 3D animation contents for realizing the sense of reality.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.2
• /
• pp.153-160
• /
• 2009

A PM10 (aerodynamic diameter${\leq}$10 ${\mu}m$) sampler is used to quantify the potential human exposure to suspended particulate matter (PM) and to comply with the governmental regulation. This study was conducted to compare and evaluate the same PM10 cutpoint and different slopes between United States Environmental Protection Agency (USEPA) PM10 sampling criterion and American Conference of Governmental Industrial Hygienists/$Comit\acute{e}$ $Europ\acute{e}en$ de Normalization/International Organization for Standardization thoracic PM10 sampling criterion through theory and experiment. Four PM10 samplers according to the USEPA criterion and one RespiCon sampler in accordance with the thoracic PM10 criterion were used in the present study. In addition, one DustTrak monitor was used to measure real time PM10 mass concentrations. All six aerosol samplers were tested in a PM generation chamber using polydisperse fly ash. Theoretical mass concentrations were calculated by applying the measured particle size distribution characteristics (geometric mean = 6.6 ${\mu}m$, geometric standard deviation = 1.9) of fly ash to each sampling criterion. The measured mass concentrations through a chamber experiment were consistent with theoretical mass concentrations in that a RespiCon sampler with the thoracic PM10 criterion collected less PM than a PM10 sampler with the USEPA criterion. The overall chamber experiment results indicated, when a PM10 sampler was used as a reference sampler, that (1) a RespiCon sampler had a normalizing factor of 1.6, meaning that this sampler underestimated an average 60% of PM10 mass sampled from a PM10 sampler, and (2) a DustTrak real-time monitor using a PM10 inlet had a calibration factor of 2.1.