• The Korean Journal of Pesticide Science
• /
• v.20 no.4
• /
• pp.319-325
• /
• 2016

This study was conducted to investigate residual organochlorine pesticides in green house soil and oriental melon, green pepper, and lettuce. The majority of them were designated as persistent organic pollutants (POPs) by the international community at the Stockholm Convention on Persistent Organic Pollutant. Extraction and clean-up method were developed using the QuEChERS method for residual organochlorine pesticides (OCPs) in soil and oriental melon, green pepper and lettuce. Recovery of OCPs in greenhouse soil and oriental melon, green pepper, and lettuce ranged from 73.3-110.6%. Limit of detection (LOD) of OCPs in soil and 3 crops were 0.01-0.08 and $0.11-0.17{\mu}g/kg$. The residues of OCPs in oriental melon, green pepper and lettuce greenhouse soil were analyzed by the developed method, and dieldrin, ${\beta}-endosulfan$ and endosulfan sulfate were detected at 1.4-72.5, 0.1-78.7 and $0.0-214.1{\mu}g/kg$, respectively. The detection frequency of 3 compounds in soils were 52 (29.7%), 34 (19.4%) and 57 (32.6%) among 175 samples, respectively. However, these compounds were not detected in all crop samples. The residue level in 3 crops were lower than 1/58.8 of maximum residue level of them. These results showed that the OCPs residue in oriental melon, green pepper, and lettuce greenhouse soil were not as high as crop safety threatening.

• The Journal of Korean Society for Radiation Therapy
• /
• v.21 no.2
• /
• pp.67-74
• /
• 2009

Purpose: To evaluate the results of absorbed and effective doses using two different modes, standard mode (A-mode) and low-dose mode (B-mode) settings for prostate cancer IGRT from CBCT. Materials and Methods: This experimental study was obtained using Clinac iX integrated with On Board Imager (OBI) System and CBCT. CT images were obtained using a GE Light Speed scanner. Absorbed dose to organs from ICRP recommendations and effective doses to body was performed using A-mode and B-mode CBCT. Measurements were performed using a Anderson rando phantom with TLD-100 (Thermoluminescent dosimeters). TLD-100 were widely used to estimate absorbed dose and effective dose from CBCT with TLD System 4000 HAWSHAW. TLD-100 were calibrated to know sensitivity values using photon beam. The measurements were repeated three times for prostate center. Then, Evaluations of effective dose and absorbed dose were performed among the A-mode and B-mode CBCT. Results: The prostate absorbed dose from A-mode and B mode CBCT were 5.5 cGy 1.1 cGy per scan. Respectively Effective doses to body from A mode and B-mode CBCT were 19.1 mSv, 4.4 mSv per scan. Effective dose from A-mode CBCT were approximately 4 times lower than B-mode CBCT. Conclusion: We have shown that it is possible to reduce the effective dose considerably by low dose mode(B-mode) or lower mAs CBCT settings for prostate cancer IGRT. Therefore, we should try to select B-mode or low condition setting to decrease extra patient dose during the IGRT for prostate cancer as possible.

• The Journal of Korean Society for Radiation Therapy
• /
• v.24 no.2
• /
• pp.107-114
• /
• 2012

Purpose: Unlike the existing linear accelerator with photon, proton therapy produces a number of second radiation due to the kinds of nuclide including neutron that is produced from the interaction with matter, and more attention must be paid on the exposure level of radiation workers for this reason. Therefore, thermoluminescence dosimeter (TLD) that is being widely used to measure radiation was utilized to analyze the exposure level of the radiation workers and propose a basic data about the radiation exposure level during the proton therapy. Materials and Methods: The subjects were radiation workers who worked at the proton therapy center of National Cancer Center and TLD Badge was used to compare the measured data of exposure level. In order to check the dispersion of exposure dose on body parts from the second radiation coming out surrounding the beam line of proton, TLD (width and length: 3 mm each) was attached to on the body spots (lateral canthi, neck, nipples, umbilicus, back, wrists) and retained them for 8 working hours, and the average data was obtained after measuring them for 80 hours. Moreover, in order to look into the dispersion of spatial exposure in the treatment room, TLD was attached on the snout, PPS (Patient Positioning System), Pendant, block closet, DIPS (Digital Image Positioning System), Console, doors and measured its exposure dose level during the working hours per day. Results: As a result of measuring exposure level of TLD Badge of radiation workers, quarterly average was 0.174 mSv, yearly average was 0.543 mSv, and after measuring the exposure level of body spots, it showed that the highest exposed body spot was neck and the lowest exposed body spot was back (the middle point of a line connecting both scapula superior angles). Investigation into the spatial exposure according to the workers' movement revealed that the exposure level was highest near the snout and as the distance becomes distant, it went lower. Conclusion: Even a small amount of exposure will eventually increase cumulative dose and exposure dose on a specific body part can bring health risks if one works in a same location for a long period. Therefore, radiation workers must thoroughly manage exposure dose and try their best to minimize it according to ALARA (As Low As Reasonably Achievable) as the International Commission on Radiological Protection (ICRP) recommends.

• Science of Emotion and Sensibility
• /
• v.21 no.2
• /
• pp.101-112
• /
• 2018

This study was carried out to enhance the competitiveness of blackbox design for domestic and international companies, based on the explosive growth of the blackbox market due to development of blackbox design for vehicle accident prevention and post-treatment. In the past, the blackbox market has produced products indiscriminately to meet the ever-increasing demand of consumers. Therefore, we thought a new design method was necessary to effectively investigate the needs of rapidly changing consumers. In this study, we aimed to identify the best-selling blackbox to understand the design flow, and the optimum area for a blackbox, considering the uniqueness of associated vehicle. Based on discussion with blackbox design experts, we studied the direction of design and the problems with blackbox use, which were reflected in blackbox development. Through this research, two types of design - leading blackbox (A type) and mass production blackbox (B type) - were proposed for compatibility of the blackbox with the car. The leading type of blackbox was positioned so that it was wrapped with the room mirror hinge before the screw was fastened, in order to achieve an integrated design. Therefore, we designed an integrated form and resolved the placement problem of an adhesive blackbox. To blend, the mass production blackbox implemented material and surface processing in the same way with the car, and adopted the slide structure to automatically turn off the main body power when removing the SDcard, reflecting consumer needs. This study considers evolving consumer needs through a case study and collective intelligence and deals with implementation of the whole design process during mass production. In this study, we aimed to strengthen the competitiveness of the blackbox design based on design method and its realization.

• Journal of the Korean Society of Earth Science Education
• /
• v.12 no.3
• /
• pp.274-290
• /
• 2019

In order for the science museum to play a role as a foundation for strengthening the national creative capability, which is the core of the advanced national development paradigm, it is important to gather the capacities of the nation's science museums and establish a platform to cooperate in a shared value system. Science museum is an independent operating system, and there is a lack of strong connections among national, public and private science museums. The existing integrated collaboration system of science museums-centered can be studied first and promoted to develop programs for the free school year according to a specific topic. The same system of science museum-inclusion which link local cultural institutions or cultural places as science culture program were also studied to do the same purpose. On the basis of problems drawn from studies of integrated collaboration systems of each participating science museum, we proposed a convergence integrated collaboration systems of science museum-centered and science museum-inclusion. To this end, data were collected from practitioners of 7 representing science museums including 5 national ones. In order to suggest improvements, we also contacted five international science museums to collect the exemplary cases. Considering the regional characteristics, science museum-inclusion integrated collaboration systems considering the cultural characteristics and the science museum-centered integrated collaboration systems for free school semesters, were developed and tried by practitioners who participated in this research. It was found that integrated collaboration system can be more activated for the community. This suggests that support from the national level or at the level of regional autonomy is essential and the connection with the curriculum is necessary for the integrated collaboration system program. Finally, professional experts such as program development or commentator can be a decisive role.

• Journal of Food Hygiene and Safety
• /
• v.32 no.1
• /
• pp.20-26
• /
• 2017

Foodborne disease outbreaks associated with produces have been increasing in occurrence worldwide. This study investigated microbial contamination levels on thirteen kinds of agricultural products from farms stage to evaluate potential hazards associated with foodborne illness. A total of 1,820 samples were collected in major cultivating area from 2013 through 2015, and analyzed to enumerate aerobic bacterial counts, coliforms/E. coli, Bacillus cereus and Staphylococcus aureus. In addition, the prevalence study for four kinds of microorganisms (Escherichia coli, E. coli O157:H7, Salmonella spp. and Listeria monocytogenes) was performed on each sample. Aerobic bacterial counts ranged from 0.01 to 7.18 log CFU/g, with the highest bacterial cell counts recorded for watermelon. Coliforms were detected in 651 samples (35.8%) with a minimum of 0.01 log CFU/g and a maximum of more than 5 log CFU/g. B. cereus was detected in 169 samples (9.3%) ranging from < 0.01 to 2.48 log CFU/g among total samples analyzed. S. aureus was detected in 14 samples (0.7%) with a minimum of 0.01 log CFU/g and a maximum of 1.69 log CFU/g. E. coli was detected in 101 samples (5.5%) among 1,820 samples. E. coli O157:H7, Salmonella spp. and L. monocytogenes were not detected in any of the samples. The microbial contamination levels of several agricultural products determined in this study may be used as the fundamental data for microbiological risk assessment (MRA).

• Journal of Food Hygiene and Safety
• /
• v.31 no.6
• /
• pp.451-457
• /
• 2016

The purpose of this study was to determine the antimicrobial effects of $ClO_2$ gas on pathogenic E. coli and Salmonella spp. colonizing on the fruit surface of strawberries for export. Factorial design was employed to treat strawberries inoculated with pathogenic E. coli or Salmonella spp. with a combination of $ClO_2$ gas concentrations (10, 20, 30, 40, and 50 ppmv), RH (50, 70, and 90%), and treatment time (0, 5, 10, 20, and 30 min). Interaction between the factors was observed to note that the reduced levels of microbial population were the highest when RH is set at 90% with gas concentration- and treatment time-dependent manner. With RH and gas concentration fixed at 90% and 50 ppmv, the populations of E. coli and Salmonella spp. decreased by 2.07 and 2.28 log CFU/g when treated for 20 min whereas population reduction by 0.5 and 0.7 log CFU/g were observed when treated for 5 min, respectively. The results help establish most effective conditions for $ClO_2$ gas treatment to enhance microbial safety of strawberries for export.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.32 no.4
• /
• pp.363-371
• /
• 1996

The Steering and Sailing Rules of International Regulations for Preventing Collisions at Sea now in use direct the best aid - action to avoid collision by the stand - on vessel. But these rules do not refer to the safety relative distance between two vessels when she should take such action. In this paper, the author analyzed the ship's collision avoiding actions from the viewpoint of ship motions and worked out mathematical formulas to calculate the relative distances necessary for taking action to avoid collision. Figuring out the values of maneuvering indices through experiments of 11 actual ships of small, medium, large and mammoth size, the author applied these values to the calculating formulas and calculated the minimum relative distances. The main results are as follows: 1. It was confIrmed that the stand - on vessel should keep the greatest relative distance for taking best aid - action to avoid collision when the cross angle of course was $90^{\circ}$ and near it(70-$90^{\circ}$ ). 2. When the cross angle of course was $90^{\circ}$ , the minimum relative distance of small vessel(GT: 160-650tons) was found to be more than about 6.8 times of her own length, and those of medium(GT : 2,300-3,500tons), large(GT : 22,OOO-62,OOOtons) and mammoth(GT : 91,000-139,000tons) vessels were found to be more than about 9.0 times, about 5.4 times and about 6.8 times of their own lengths. 3. It was confIrmed that collision danger was greater when crossing angle was obtuse than in an acute angle, therefore greater relative distance was to be kept by the stand - on vessel for taking best aid - action to avoid collision in the case of the obtuse angle. 4. In every vessels, in the case of $90^{\circ}$ cross angle of course the safety minimum relative distance was found to be more than about 9.0 times of their own lengths.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.32 no.4
• /
• pp.372-380
• /
• 1996

The operation of Far East Chain(GRI 5970) of Loran - C system had been stopped on June, 1995, but that of Korean Chain(GRI 9930) of Loran - C system which was jointed with North West Pacific Chain(GRI 8930) and Russia Chain(GRI 7950) by international cooperation, was started on January 1996. In this paper, in order to study the accuracy of Loran - C fix of Korean Chain, the authors examined and analyzed the data of the reciever of Loran - C(LC -90, Furuno) and GPS(AccNav Sport super (TM), Eagle) measured automatically and continually for 2 seconds at interval of 5 minutes from November 22, 1992, to January 20, 1996 at the fixed position of National Fisheries University of Pusan, The results obtained were as follows ; 1)The mean time differences of M-W, M-X, and M-Y pair measured in the base observed position were 12333.09${\mu}$s, 28338.44${\mu}$s, and 42806.01${\mu}$s respectively and the mean standard deviations of that were 0.0121${\mu}$s, 0.0290${\mu}$s, and 0.0327${\mu}$s respectively. The daily and monthly variance forms of time difference at each pair appeared in a similar reappearance. 2)The mean standard deviations of the latitude and longitude by Loran - C were 9.1m and 17.4m in W.X pair, 11.5m and 13.7m in W.Y pair, and 8.1m and 29.3m in X.Y pair respectively, and then the probable radiuses within 95% of each pair were 39.2m, 35.7m, and 60.8m, respectively. Therefore, It is to be desired that W.Y par is selected to improve the accuracy in Pusan area. 3)The mean standard deviations of the latitude and longitude by GPS were 15.4m and 15.0m and the probable radius within 95% was 43.4m. 4)The position errors for GPS and each pair of Loran - C were 16.0m to the South in GPS and 265.2m to the East in W.X pair of Loran - C, 279.5m to the North in W.Y pair of that, and 224.3m to the North-West in X.Y pair of that, so GPS is about 250m higher than Loran - C in accuracy.

• Journal of Hospice and Palliative Care
• /
• v.8 no.1
• /
• pp.18-29
• /
• 2005

Purpose: Aroma therapy is one modality of alternative medicine. It was well known to have an analgesic, antidepressive and anxiolytic effects. This study is designed to investigate the effect of aroma self hand massage on vital signs, pain, depression, anxiety and stress in breast cancer patients. Methods: 32 female patient over 20 years old were divided into two groups by a non-blinded randomized controlled method. Patient in the aroma group (n=15) massaged their hands twice a day using aroma oil by themselves in their home for 2 weeks. However, those in control group (n=17) had not received my intervention during the study periods. Pain intensity, state anxiety, depression and stress of subjects were evaluated three times (0, 1, 3 weeks) using Visual Analogue Scale (VAS, $0{\sim}10cm$), State Trait Anxiety Inventory (STAI), Beck Depression Inventory Scales (BDIS), Brief Encounter Psychosocial Instrument (BEPSI revised edition). Also the change of patients' accompanying symptoms after aroma massage were analyzed using a structured questionnaire. Results: Pain Intensity decreased in the aroma group compared with control group (VAS changes $-0.83{\pm}1.01\;vs\;0.38{\pm}0.86$, P=0.005). The numbers of accompanying symptoms (P=0.044), depression score (P=0.001) and anxiety score (P=0.008) were significantly decreased in the aroma group, while in control group they increased after 2 weeks. However, the stress score showed no significant changes in both groups ($0.05{\pm}0.85\;vs\;0.04{\pm}0.20$, P=0.1519). The depression, anxiety and stress score showed negative correlation with compliance of aroma massage, but statistically no significant. The systolic blood pressure was a little increased in aroma group ($4.53{\pm}14.43\;vs\;0.0{\pm}7.22$, P=0.026), but was not significant clinically. Patients in the aroma group complained of several symptoms such as headache (20%), paresthesia (6.75%) and nausea (6.7%). However, there were no drop-out patients for those side effects. Conclusion: Aroma self massage during two weeks in breast cancer patients alleviates the pain intensity, depression and anxiety significantly.