• 약학회지
• /
• 제29권4호
• /
• pp.176-182
• /
• 1985

As a part of the studies on adsorptive properties of Korean halloysite clays, Hadong white clays of premium grade were examined for geometric pore structured by mercury porosimetry and for specific surface areas by nitrogen adsorption according to the BET procedure. Three size fractions of the native clay sample were derived from passage BS #100, #200 and #325 meshes, respectively. Several parameters lhus observed in relation to the pore structures are shown below: 1. The size fraction of BS #100, #200 and #325 show internal pore volumes of 25.3, 30.2 and $35.0m^2g^{-1}$, respectively. 2. In the distribution curves of the cumulative pore volume against pore diameter, it has been shown that the larticle sizes, the steeper the distribution over the larger ranges of pore diameters. The converse is true the smaller particles. 3. Internal pore areas increase with decrease in pore sizes. It follows that the pores having diameters of $\leq$0.1$\mu\textrm{m}$ are responsible for more than 90% of the total pore area. 4. The behaviour of nitrogen adsorption can be best described by BET type IV isotherm. Further, the hysteresis loops of the adsorptiondesorption curves become narrower with decresing particle sizes. 5. The specific surface areas observed for the fractions of BS #100, BS #200 and BS #325 are 34.6, 35.4 and 43.2m $^2g^{-1}$, respectively. and the calcined clay of BS #325 has a specific surface area near $30.4m^2g^{-1}$.

• 멤브레인
• /
• 제17권4호
• /
• pp.329-337
• /
• 2007

본 연구에서는 p-toluenesulfonic acid (TSA)와 polyvinylpyrrolidone (PVP)를 함유한 polyethersulfone (PES) 고분자 용액을 이용하여 PES 멤브레인 내에 최소 공경을 갖는 내부 분리층을 만드는 방법에 관한 새로운 방법을 제시하고자 한다. 팽윤제로 사용된 PVP와 응고제로 사용된 TSA를 함유한 평막형 PES 멤브레인의 제조 및 구조적인 특성 조사가 수행되었으며, 상업용 막에 대등할 만한 투과 성능과 좁은 pore size distribution을 가지는 멤브레인을 제조할 수 있음을 확인하였다. 또한 PVP의 첨가는 멤브레인의 단면구조와 투과 성능에, TSA는 투과 성능보다는 pore size distribution에 영향을 준다는 것을 확인하였으며 이는 FE-SEM 결과와 TSA를 첨가한 멤브레인의 단면 사진에서 내부 최소 기공층의 두께가 두꺼워짐을 확인할 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제45권2호
• /
• pp.232-242
• /
• 2017

The objective of this study was to examine changes in the porosity and internal structure of wood as it goes through the process of saccharification (extraction of fermentable sugars). This study also examined the use of different drying methods to prepare samples for characterization of internal pores, with particular emphasis on the partially disrupted cell wall. Aspen wood flour samples after dilute acid pretreatment followed by enzymatic hydrolysis were examined for nitrogen adsorption. The resulting isotherms were analyzed for surface area, pore size distribution, and total pore volume. Results showed that freeze drying (with sample pre-freezing) maintains the cell wall structure, allowing for examination of saccharification effects. Acid pretreatment (hemicellulose removal) doubled the surface area and tripled the total volume of pores, which were mostly 10-20 nm wide. Subsequent enzymatic hydrolysis (cellulose removal) caused a 5-fold increase in the surface area and a ~ 11-fold increase in the total volume of pores, which ranged from 5 to 100 nm in width. These results indicate that nitrogen adsorption analysis is a feasible technique to examine the internal pore structure of lignocellulosic residues after saccharification. The information on the pore structure will be useful when considering value-adding options for utilizing the solid waste for biofuel production.

• 한국농공학회지
• /
• 제36권3호
• /
• pp.90-99
• /
• 1994

To investigate the undrained shear strength characteristics of marine soils with high water content, high compressibility and weak bearing capacity, a series of undrained triaxial tests with pore pressure measurements on undisturbed and disturbed Banwol marine clay in normally consolidated and overconsolidated states is carried out. The results and main conclusions of this study are summarized as follows : 1 . When the consolidation pressure is increased, the maximum deviator stress of disturbed and undistubed clay in normally consolidated state is increased. Pore pressure parameters and internal friction angle of undisturbed clay are greater than those of disturbed clay. 2. The relationship between pore pressure and axial strain of undisturbed clay in normally consolidated state can be expressed as a hyperbolic function like stress-strain relation proposed by Kondner. 3. In the pore pressure-axial strain relation of disturbed clay in normally consolidated state, failure ratio R'f is greatly deviated in the range of 0.7~0.9 proposed by Christian and Desai. 4. For overconsolided clay, when overconsolidation ratio (OCR) is increased, normalized maximum deviator stress is increased and maximum pore pressure is decreased gradually. 5. Cohesion of overconsolidated clay is greater than that of nomally consolidated clay and internal friction angle slightly is decreased. 6. Pore pressure parameter at failure (Af) of overconsolidated clay is varied with OCR, Af becomes negative values with increment in OCR

• 대한토목학회논문집
• /
• 제32권2C호
• /
• pp.37-47
• /
• 2012

본 연구에서는 필댐을 위한 모니터링 기술에 적용할 수 있는 물리량으로 간극수압, 온도와 전기저항을 선정하였고, 이를 원심모형시험 상에서 계측할 수 있는 시스템을 구축하였다. 또한, 코아형 필댐 모형 단면을 설계하고, 코아죤에 취약부가 없는 정상적인 경우, 코아죤 하부에 부분적인 취약부가 발생한 경우, 코아죤 하부에 취약부가 커져서 상하류 사력죤이 연결되는 경우를 포함하여, 총 세 가지 모형을 제작하고, 원심모형시험을 수행하였다. 원심력장이 작용하는 조건에서, 담수시에 나타나는 침투 흐름의 변화에 따라 간극수압, 온도 및 전기저항의 변화를 모니터링하였다. 원심모형시험을 통하여, 간극수압, 온도 및 전기저항의 변화가 취약부 존재에 따라 다르게 나타나는 것을 확인할 수 있었고, 간극수압, 온도와 전기 저항이 필댐의 내부 취약부를 탐지하기 위한 모니터링 기술 개발에 적용될 수 있음을 확인하였다.

• 한국건설순환자원학회논문집
• /
• 제7권3호
• /
• pp.187-193
• /
• 2019

미세먼지의 물리적 흡착기구에서 다공질 매체의 공극구조 연결성은 매우 중요한 인자이다. 본 연구에서는 플라이애시 기반의 지오폴리머를 기본 매체로 하고, 내부에 유기 생분해성 섬유재를 매립하여 강알칼리에 용해한 뒤 내부 연결 공극을 가지는 조직을 제조하였다. 다양한 배합을 통하여 압축강도는 20MPa 이상을 확보하였지만 NaOH 5mole 및 $30^{\circ}C$에서는 PLA가 거의 용해되지 않았으며, 온도의 증가에 따라 PLA 용해속도는 급격히 증가하였다. 비즈 타입의 PLA 섬유가 온도 $90{\sim}130^{\circ}C$ 및 NaOH 5~12mole 조건에서 24시간 이내에 모두 용해하는 것을 확인하였는데, 상온에서의 FA 기반 지오폴리머의 경우 반응성이 거의 없으므로 용해된 섬유내의 공간은 유효할 것으로 판단된다. 이러한 내부 공극연계구조는 미세먼지의 흡착 및 저장에 유리할 것으로 예상된다.

• 대한건축학회논문집:구조계
• /
• 제33권12호
• /
• pp.63-70
• /
• 2017

When industrial by-products like slag and fly ash are using in concrete with cement, it improves strength and durability against external deterioration factors by densifying the structure through potential hydraulic and pozzolanic reaction. But it has been pointed out that high dependence on the quality variation and the curing condition using a admixure material for concrete. In this study, the characteristics of internal micropore structure according to curing condition were analyzed for pastes and mortar specimens under using blast furnace slag powder. As a result, the variation of compressive strength and the internal microstructure were observed according to curing conditions by binder type. Particularly, using blast furnace slag powder, decrease in compressive strength were clearly observed in indoor and carbonation curing compared with water curing. The pore structure analysis also clearly observed the decrease of the gel pore existing in the CSH hydrate layer and the increase of the capillary pore in indoor and carbonation curing compared with water curing condition.

• 멤브레인
• /
• 제17권4호
• /
• pp.318-328
• /
• 2007

본 연구에서는 호소수의 정수처리공정 중 폴리술폰계 중공사막을 이용한 침지형(흡인압)과 외압형을 동시에 적용한 분리막 공정으로 압력 및 공경에 따른 투과플럭스의 변화에 관한 성능을 평가하고자 하였다. 침지형(흡인압) 공정의 압력에 따른 최대 투과 플럭스는 공경이 $0.3{\mu}m$에서 평균 282 LMH, $0.05{\mu}m$에서는 234 LMH를 나타내었으며 외압형(외압) 공정의 압력에 따른 최대 투과 플럭스는 공경이 $0.3{\mu}m$에서 평균 443 LMH, $0.05{\mu}m$에서는 522 LMH를 나타내었다. 또한, 흡인압과 외압을 동시에 적용한 공정의 압력에 따른 최대 투과 플럭스는 공경이 $0.3{\mu}m$에서 평균 674 LMH $0.05{\mu}m$에서는 648 LMH를 나타내었다. 따라서, 호소수를 이용한 정수처리공정에서 분리막으로 흡인압과 외압을 동시에 이용할 경우 단위 면적당 생산수를 최대로 할 수 있을 것으로 사료된다.

• 한국염색가공학회지
• /
• 제11권6호
• /
• pp.1-6
• /
• 1999

The porosities of PET fibers were investigated using a nitrogen porosimeter according to oxygen plasma treatment and dyeing with a disperse dye, and they were discussed in terms of the change of internal micro-structure of the PET fiber. The total pore volume, surface area and average pore size of the plasma treated PET fibers increased expectably compared with the untreated sample. The PET fibers treated with oxygen plasma and then dyed with a disperse dye were increased significantly in the surface area and the total pore volume comparing with those of plasma treated only, but decreased in the average pore size. The increase of the surface area, after dyeing, of the plasma treated PET fibers was due to addition of the surface area of the dye itself to that of the PET fiber. The increase of the total pore volume of the plasma treated PET fibers by dyeing, which is the opposite result to the general idea that the pore volume of fibers would be reduced by occupation of dye molecules in the pores, could be explained by the free-volume model. This is that the amorphous region in the fiber expanded by occupation of dye molecules, and the marginal space surrounding dyes was generated as many smaller pores, and the decrease of the average pore size of the dyed sample also could be explained The decrease of the average pore size was caused by the splitting of a larger pore into smaller pores.

• 대한금속재료학회지
• /
• 제49권7호
• /
• pp.530-534
• /
• 2011

To analyze the effect of the pore size of graphite in a pore-forming agent, graphite was added to porous ceramics of $Al_2O_3-SiO_2-ZrO_2$ systems. The graphite had 45~75, 100~125, 150~180, and 75~180${\mu}m$ dimensions. The properties of the ceramics, such as apparent porosity, density, dynamic elastic modulus, mechanical strength, and permeability, were investigated. The average pore size increased from 15.35${\mu}m$ to 22.32${\mu}m$ with the increase of the graphite size. The sample with the largest average pore size showed the highest mechanical strength and gas permeability. This was due to the sample with the largest pore size at the same porosity having fewer pores and larger distance between the pores than the sample with the smallest pore size, making cracks less likely to propagate. In addition, the large pore size reduced the repulsive power originating from the drag force between the gas and internal pore walls.