• 설비공학논문집
• /
• 제20권8호
• /
• pp.517-525
• /
• 2008

In order to study the heat transfer and pressure drop of an internal heat exchanger for $CO_2$ heat pump under cooling condition, the experiment and numerical analysis were performed. Four kinds of internal heat exchangers with a coaxial tube type and a micro-channel tube type were used. The experimental apparatus consisted of a test section, a power supply, a heater, a chiller, a mass flow meter, a pump and a measurement system. The section-by-section method and Hardy-Cross method were used for the numerical analysis. The effects of the internal heat exchanger refrigerant flow rate, the length of the internal heat exchanger, the operating condition of the gas-cooler, the evaporator and the type of the internal heat exchangers were investigated. With increasing of the flow rate, the heat transfer rate increased about 25%. The heat transfer rate of the micro-channel tube type was higher about 100% than that of the coaxial tube type. With increasing of the length of the internal heat exchanger, the heat transfer rate increased about $20{\sim}50%$. The pressure drop of the low-side tube was larger compared with that of the high-side tube.

• 설비공학논문집
• /
• 제16권2호
• /
• pp.158-166
• /
• 2004

The performance of a heat pump using $CO_2$ is predicted and analyzed by using a cycle simulation model developed in this study. Cycle simulations are conducted by varying design parameters and operating conditions with the applications of advanced techniques to improve system performance. The applied systems in the simulations are internal heat exchanger, expander, and 2-stage compression with intercooling. As a result, the applications of advanced techniques improve the heating and cooling performances of the transcritical $CO_2$ cycle by 8∼26％ and 20∼30％, respectively, over the basic cycle.

• Corrosion Science and Technology
• /
• 제12권2호
• /
• pp.102-112
• /
• 2013

A very high-temperature gas reactor (VHTR) is one of the next generation nuclear reactors owing to its safety, high energy efficiency, and proliferation-resistance. Heat is transferred from the primary helium loop to the secondary helium loop through an intermediate heat exchanger (IHX). Under VHTR environment Alloy 617 is being considered a candidate Ni-based superalloy for the IHX of a VHTR, owing to its good creep resistance, phase stability and corrosion resistance at high temperature. In this study, high-temperature corrosion tests were carried out at 850 - $950^{\circ}C$ in air and impure helium environments. Alloy 617 specimens showed a parabolic oxidation behavior for all temperatures and environments. The activation energy for oxidation was 154 kJ/mol in helium environment, and 261 kJ/mol in an air environment. The scanning electron microscope (SEM) and energy-dispersive x-ray spectroscopy (EDS) results revealed that there were a Cr-rich surface oxide layer, Al-rich internal oxides and depletion of grain boundary carbide after corrosion test. The thickness and depths of degraded layers also showed a parabolic relationship with the time. A corrosion rate of $950^{\circ}C$ in impure helium was higher than that in an air environment, caused by difference in the outer oxide morphology.

• 한국산학기술학회논문지
• /
• 제12권6호
• /
• pp.2888-2897
• /
• 2011

본 연구에서 개발된 정상상태 사이클 모사 프로그램을 통해 이산화탄소를 사용하는 지열 히트펌프 시스템의 성능을 고찰하였다. 내부열교환기를 포함하지 않는 기본 히트펌프 사이클의 성능에 대한 다양한 운전변수들의 영향을 조사하기 위해 매개변수 연구를 수행하였다. 시뮬레이션 프로그램은 실내기, 실외기, 압축기, 팽창밸브를 모사하는 포트란 서브루틴과 비주얼 베이식을 사용해 프로그램된 입력을 위한 전처리, 출력을 위한 후처리 프로세서를 포함하는 그래픽 인터페이스로 구성되어 있다. Refprop V6.01을 사용하여 이산화탄소의 열역학적 물성치와 상평형 거동을 계산하였다. 모사결과들의 신뢰성은 사례연구를 통한 실험데이터와의 비교를 통해 검증하였다. 본 연구에서 개발된 사이클 모사 프로그램은 이산화탄소 지열 히트펌프 시스템의 경제적이면서도 효율적인 운전조건들을 결정하고 최적화하는 데 있어 유용한 도구가 될 수 있을 것이다.

• 설비공학논문집
• /
• 제25권4호
• /
• pp.173-179
• /
• 2013

Middle-sized $CO_2$ water heater having compressor power of 7.45 kW was designed, and its performances were experimentally tested. Besides, optimum design of the $CO_2$ water heater was conducted by cycle simulation. When ambient temperature of $7^{\circ}C$ and hot water outlet temperature of $80^{\circ}C$ the $CO_2$ water heater showed the COP of 3.2. As hot water temperature increased the COP is getting decreased due to significant increase of compressor power consumption compared to increasing rate of heating capacity. When ambient temperature increased from $-3^{\circ}C$ to $12^{\circ}C$ the COP increased by 30%. The optimum components design of a gas cooler, an internal heat exchanger, and an evaporator were conducted, and the experimental correlation between amount of EEV opening and ambient temperature, and hot water temperature was suggested.

• 한국산학기술학회논문지
• /
• 제21권6호
• /
• pp.403-410
• /
• 2020

본 논문은 포항지역 태양광 데이터를 기반으로 태양열을 적용시켜 12kW의 소형 초임계 이산화탄소(s-CO₂) 시험 루프의 설계와 실험 시설의 이론적 연구, 안정화 및 최적화를 통한 이산화탄소의 특성 연구에 초점을 맞추고 있다. 실험 시설의 열역학 사이클은 구성 요소의 한계로 인해 액체, 가스 및 초임계 CO₂가 모두 존재하는 랭킨 사이클(임계점 순환 주기)이며, 펌프, 히터, 레귤레이터, 열교환기, 가스 부스터, 에어 컴프레서 등으로 구성된다. 현재 본 연구에서 제작된 12kW 소형 발전 시스템은 최고압력 12MPa 최고 온도 70℃의 조건에서 6.98%의 효율이 나타나도록 설계되었다. 본 실험 장치를 소형 Brayton cycle과 비교했을 때 약 2% 높은 효율을 가진다는 것을 이론적으로 확인하였고, 사이클 효율을 높이기 위해 최적의 터빈 입구 온도와 압력을 얻었으며, 이 조건에서 IHX(내부 열교환기)의 도입시 18.75%의 최대 효율을 기대할 수 있다는 결론을 도출하였다. 마지막으로, 실험 설비의 태양광 시뮬레이션 결과 5월에는 6.7%, 6월에는 6.26%의 효율로 태양열을 이용할 수 있음을 확인하였다.

• 대한금속재료학회지
• /
• 제50권9호
• /
• pp.659-667
• /
• 2012

Alloy 617 is a Ni-base superalloy and a candidate material for the intermediate heat exchanger (IHX) of a very high temperature gas reactor (VHTR) which is one of the next generation nuclear reactors under development. The high operating temperature of VHTR enables various applications such as mass production of hydrogen with high energy efficiency. Alloy 617 has good creep resistance and phase stability at high temperatures in an air environment. However, it was reported that the mechanical properties decreased at a high temperature in an impure helium environment. In this study, high-temperature corrosion tests were carried out at $850^{\circ}C-950^{\circ}C$ in a helium environment containing the impurity gases $H_2$, CO, and $CH_4$, in order to examine the corrosion behavior of Alloy 617. Until 250 h, Alloy 617 specimens showed a parabolic oxidation behavior at all temperatures. The activation energy for oxidation in helium environment was 154 kJ/mol. The SEM and EDS results elucidated a Cr-rich surface oxide layer, Al-rich internal oxides and depletion of grain boundary carbides. The thickness and depths of degraded layers also showed a parabolic relationship with time. A normal grain growth was observed in the Cr-rich surface oxide layer. When corrosion tests were conducted in a pure helium environment, the oxidation was suppressed drastically. It was elucidated that minor impurity gases in the helium would have detrimental effects on the high-temperature corrosion behavior of Alloy 617 for the VHTR application.