• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.2
• /
• pp.95-107
• /
• 2009

The purpose of this research was to examine the fitness of zirconia cores that were made by different sintering methods; generic electricity furnace and microwave furnace. Firstly, 12 cores for each group were made by using each different sintering process and attached them to a metal die with silicon. The internal and marginal gap of sintered zirconia was measured by using Skyscan 1076 micro-CT, then it was reorganized by CT-An software. To each samples, we extracted B-L image, M-D image of cutting side, and cross-sectional side of tooth long axis and calculated the mean value of marginal, axial, and occlusal gap each side. Results: 1. The mean marginal gap of sintered zirconia was $36.20{\mu}m$ for EVE, $47.67{\mu}m$ for LAV, $52.47{\mu}m$ for DEN, and $54.63{\mu}m$ for CER. 2. For the axial wall, the research showed the largest value of $63.49{\mu}m$ for EVE, but there were no statistical significance. 3. In related to the occlusal internal measurement, DEN showed the smallest value ($77.06{\mu}m$), EVE and CER showed significantly high value. From this study, it is suggested that CAD/CAM zirconia core which was made in the process of microwave sintering has clinically acceptable values in marginal and internal gap.

• Journal of Yeungnam Medical Science
• /
• v.7 no.1
• /
• pp.69-80
• /
• 1990

A clinical analysis was done on 23 patients(24 hips) with fracture of the femoral neck, who had been admitted and treated at our Orthopedic department during the period of 4 years, from Jan, 1984 to May 1988. The results were as follows : 1. 23 patients were comprised of 4 males and 19 females, and 11 patients were over 65 years old. 2. 18 cases of 24 cases were due to minor traumas such as slipping down, and for over 65 years old, all cases were due to simple minor traumas, 8 cases were showed a severe osteoporosis, below grade 3 of the Singh's index. 3. 14 cases of 24 cases were displaced subcapital fractures, and 6 cases displaced transcervical fractures. Only 4 cases were the undisplaced transcervical fractures. 4. In treatment of fractures internal fixations after manipulation were performed in 14 cases and primary arthroplasties in 10 cases. Secondary arthroplasties were done in complicated 4 cases of 14 cases treated with internal fixations. 5. Complications after internal fixation were developed in 7 cases out of 14 cases, avascular necrosis in 6, nonunions in 2, pin migrations in 3, and metal failure in 1 case. 6. In 14 arthroplasty immediate surgical fitness of femoral stem were related to late loosening of femoral stem(correlation coefficient r=-0.68, p<0.01).

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.4
• /
• pp.313-320
• /
• 2020

Purpose: The purpose of this study was to evaluate the machining precision and the marginal and internal fit of single restorations fabricated with three types of lithium disilicate ceramic blocks and to evaluate the correlation. Materials and methods: Single restorations were designed using a CAD software program. The crown designed model file was extracted from the CAD software program. Three types of lithium disilicate blocks (Rosetta; HASS, IPS e.max CAD; Ivoclar vivadent, VITA Suprinity; VITA) were milled using a milling machine. For the fabrication of the crown scanned model file, the intaglio surface of the restoration was digitized using a contact scanner. Then, using the three-dimensional inspection software (Geomagic control X; 3D Systems), the process of the overlap of the crown designed model and the scanned model and 3-dimensional analysis was conducted. In addition, the marginal and internal fit of the crowns was evaluated by a silicone replication method. The difference among three types of single ceramic crown was analyzed using a Kruskal-Wallis H test, and Spearman correlation analysis was performed to analyze the correlation between machining precision and fitness (α=.05). Results: There was a significant difference in the machining precision and the marginal and internal fit according to the type of ceramic block (P<.001). In addition, the machining precision and the marginal and internal fit were positively correlated (P<.001). Conclusion: The marginal fit of crowns fabricated according to the types of ceramic blocks was within the clinically acceptable range (< 120 ㎛), so it can be regarded as appropriate machining precision applicable to all clinical as aspects in terms of the marginal fit.

• The Journal of Korean Association of Computer Education
• /
• v.11 no.1
• /
• pp.47-55
• /
• 2008

The purpose of this study is finding factors affecting the teachers' use of Edunet and exploring the developmental direction of Edunet which is a web based comprehensive educational information service system. Based on the technology acceptance model and the results of the previous studies, five external and three internal factors influencing the use of Edunet were extracted. The participants were 100, the group of field-assistants who were expected core users in Edunet, and the response of questionnaire was gathered by online survey system. To analyze the collected data and the hypothesis, multiple regression was employed. The result indicated that "usefulness" and "trust" affected statically to both (a) the use and (b) the future-intention use of Edunet. "Fitness of instruction" and "ease of use" affected to (c) the usefulness of Edunet. (d) The ease of use of Edunet was affected by "self-efficiency", "contents quality" and "the system-performance" of Edunet.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.4
• /
• pp.310-315
• /
• 2015

Purpose: The purpose of this study was to measure the tightening torque for dental implant in dental laboratory and to analyze of the effects of different tightening torque. Materials and Methods: The tightening torque for dental implant in dental laboratory were measured by digital torque gauge. The length of abutment and analog were measured as tightening torque of manufacturer's instructions and the measured value. And the data were statically analyzed. Results: The mean tightening torque of implant screw in dental laboratory was $1.563{\pm}0.332Ncm$. The external type implant system of total length were showing no significant differences but the internal type implant system had difference significant (P < 0.05) when compared with tightening torque. Conclusion: The implant prosthesis should be made under manufacturer's instructions especially as tightening torque of screw. For the fidelity of implant prosthesis, dental technician should learn how to use the torque gauge.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.18 no.1
• /
• pp.83-86
• /
• 2012

Background: The research examined the effect of a scapular stabilizing exercise on shoulder pain, active range of motion (AROM) and changes in the position of the shoulder blade of patients with frozen shoulder. Methods: General physical therapy and a scapular stabilizing exercise were applied to a 53-year-old female patient with frozen shoulder three times a week for four weeks. Before and after the therapy, measurements were made on the visual analog scale (VAS) and of the AROM, and a lateral scapular slide test was conducted. Results: Following the therapy, VAS fell from 7 to 3. Before therapy, flexion, abduction, internal rotation, and external rotation recorded $133^{\circ}$, $102^{\circ}$, $45^{\circ}$, and $53^{\circ}$ respectively; after the therapy they increased to $150^{\circ}$, $123^{\circ}$, $55^{\circ}$, and $65^{\circ}$ respectively. The lateral scapular slide test showed sliding distances before therapy of 8.5cm at $0^{\circ}$, 9.2cm at $45^{\circ}$, and 11.3cm at $90^{\circ}$; after therapy, the distances decreased to 6.8 cm at $0^{\circ}$, 8.2 cm at $45^{\circ}$, and 9cm at $90^{\circ}$. Conclusion: The scapular stabilizing exercise was effective in alleviating shoulder pain, increasing AROM, and reducing changes in the position of the shoulder blade of frozen shoulder patients.

• Fashion & Textile Research Journal
• /
• v.15 no.4
• /
• pp.523-532
• /
• 2013

This study investigates risk reduction behavior with risk perception in outdoor wear purchase situations. Data were collected via a questionnaire from 400 consumers between the ages of 20 to 50 residing in Seoul and Kyonggi-do. Data analysis were conducted with SPSS 20 program on the reliability test, factor analysis, cluster analysis, t-test, ANOVA, and Duncan's multiple range test. Factor analyses were employed for the participation motivation of mountain climbing activities, risk reduction behavior and risk perception. Five factors were for the participation motivation of mountain climbing activities (health and fitness, external ostentation, achievement and excitement, improvement of climbing skills, and society). Five factors were for risk perception (fashionability loss and social risk, time and convenience loss, economic risk, performance risk, and psychological risk). Five factors were for the risk reduction behavior (interpersonal information sources use, marketer-dominated information sources use, professional information sources use, pre-purchase deliberation/observation/experience, and brand dependence). Three clusters were identified based on the motivation of outdoor activities (the affiliation/display, the health/internal informativeness and low motivation). The participation motivation for mountain climbing activities were varied. Manufacturers should increase efforts to develop products with good qualities at a reasonable cost as well as establish new marketing strategies since the risk of product performance and economic efficiency in the purchase of outdoor wear was a significant consumer perception.

• Journal of the Korea Convergence Society
• /
• v.6 no.5
• /
• pp.257-274
• /
• 2015

The purpose of the current study was to validate Fetzer Institute & National Institute on Aging Working Group[NIA](1999)'s Brief-Multidimensional Measure of Religiousness/Spirituality Scale (BMMRS) in Korean adults. The Korean version of BMMRS, Spiritual Well-Being Scale(SWS), Korean Sprituality Scale(KSS), Penn State Worry Questionnaire(PSWQ), and Intolerance of uncertainty Scale(IUS) were administered to the 286 students and community samples. A principle axis factoring analysis with direct oblimin rotation and Kaiser normalization identified a six-factor solution accounting for 66.24% of the variance in scores, labeled as: positive spiritual experience, negative spiritual experience, forgiveness, religious practices, negative congregational support, and positive congregational support. Confirmatory factor analysis results showed that 6 factor model of BMMRS have a good fitness. Also, the internal consistency(.64~.97) and the test-retest reliablity was adequate.(.72~.88) Korean version of BMMRS has adequate psychometric characteristics so it can be used to verify the effects of various compassion-related psychotherapeutic approaches.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.5
• /
• pp.701-712
• /
• 2004

This study is aimed at the application of the apparel size system to be applied for the Internet shopping mall in Korea. Especially this is focused on the presumption of the body measurement according to the age groups and the figure groups. In this regard, a sizing system is to be developed that could be used to approach consumers more easily and provide more fitness and accuracy in terms of size. The target study was on a group of women nineteen to forty-nine years of age. The 4th National Anthropometry Survey data were used in the examination. The results in the study are as follows ; (1) On the Internet apparel shopping malls in relation with this study, no matter what size in the ready-to-wear enterprises was selected by the consumers who once put their information in the member registration, the most appropriate sizes for them are automatically given and transferred to the order forms of chosen enterprises with aid of internal programs of the internet webpage. In addition, when consumers enter their body sizes in the units that are familiar to them, such as inches or centimeters, the units are automatically programed so that they can be converted for the sake of convenience. ; (2) To extract an estimation equation of body size through Multiple Regression Analysis, the circumferences of chest and hip could be presumed by stature, weight, and waist circumference of which most consumers were well aware. For more accurate regression equations, groupings were made in the three categories of age(19∼29/30∼39/40∼49) and in the three body types(Type N, A and H). Then, the regression equations were established for three sectors, $\circled1$ 'chest circumference not filled up', $\circled2$ 'hip circumference not filled up' and $\circled3$ 'neither filled up for chest nor for hip circumference'. The final results of regression were presented in