• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.13-21
• /
• 1974

1. In the past, the smoke-pipe type dry kiln being characterized by the low cost of installation and easy operation was only used by the small scale of wood processing enterprisers for drying softwood and finishing air-dried stocks that were belonged to easy drying properties. The smoke-pipe type dry kiln usually was not suitable for drying hardwoods and green woods because of the difficulties of controlling drying conditions. 2. However, the smoke-pipe type dry kiln heated with smokeless coal which was designed and constructed by the authers was demonstrated to maintain higher accuracy of controlling temperature and humidity than the other smillar types of kiln. Also, since it was constructed with home made equipments, it is supposed to offer the opportunity to install the kiln by the small scale of wood processing enterprisers who could not install the dry kiln because of economical and technical difficulties. Thus, it is expected that promoting the spread of installing the dry kiln will realize the rational use of wood.

• Textile Coloration and Finishing
• /
• v.6 no.3
• /
• pp.1-7
• /
• 1994

Cotton fiber and NaOH-mercerized cotton fiber had been treated by liquid ammonia and were dyed with two direct dyes, C.I. Direct Red 2 and Blue 1. The effect of the treatment on the rate of dyeing, dye adsorption isotherm, and affinity were studied. The rate of dyeing was increased in the order of NaOH-mercerized> NaOH/liquid ammonia-treated > liquid ammonia-treated>Untreated cotton irrespective of kind of dyes. The rate of dyeing for NaOH-treated fiber considerably increased, whereas liquid ammonia-treated or NaOH/liquid ammonia-treated did not because the structural transformation was not enough for the dyes to penetrate easily into the liquied ammonia-treated cottons. The time of half-dyeing was considerably reduced by mercerizing with NaOH, but lengthened by liquid ammonia treatment because of increased equilibrium dye exhaustion especially in dyeing with C.I. Dierect Red 2. In spite of a short time of the ammonia treatment for 4 seconds, the equilibrium exhaustions of both of direct dyes, C.I. Direct Red 2 and C.I. Direct Blue 1, were increased in proportion to internal volume of treated cotton under a condition of fixed affinity.

• Textile Coloration and Finishing
• /
• v.21 no.6
• /
• pp.12-21
• /
• 2009

The dyeing property of direct-spinning type and seaisland type 0.2D micro polyester nonwoven fabrics was characterized by three disperse dyes (Dorosperse Red KFFB, Blue KGBR, Yellow KRL) at $120^{\circ}C$ and $130^{\circ}C$. Before and after reduction cleaning, dyeing fastness was evaluated and the thermomigaration after heat setting at $180^{\circ}C$ for 60 min were also evaluated. Direct-spinning type fabric showed better dyeing property, wash fastness, and light fastness, but worse rub fastness than seaisland type fabric. The dyeing property and fastness of direct-spinning type fabric increased at higher dyeing temperature, whereas seaisland type fabric exhibited lower dyeing fastness and the increase of thermomigration at higher dyeing temperature. Non-fixed dye in fiber surface was removed by reduction cleaning process, then dyeing fastness was improved and thermomigration decreased. The higher dye uptake of direct-spinning type non-woven fabric caused the increase of dye molecule migration from fiber internal to fiber surface, so this fabric showed larger thermomigration than seaisland type non-woven fabric.

• Journal of the Speleological Society of Korea
• /
• no.79
• /
• pp.77-81
• /
• 2007

In this paper deals with behavior of the magnetic abrasive using Sr-Ferrite on polishing charateristiccs in a internal finishing of staninless steel pipe a tying magnetic abrasive polishing. The magnetic polishing is the useful method to finish some machinery fabrications by using magnetic power. This method is one of the precision techniques and has in aim for clean technology in the transportation of the pure gas in the clean pipes. The magnetic abrasive polishing method is not so common in the field of machine that it is not known to widely. There are rarely researcher in this field because of non-effectiveness of magnetic abrasive. Therefore, in this paper we deals with the development of the magnetic abrasive with the use of Sr-Ferrite. In this development, abrasive grain SiC has been made by using the resin bond fabricated at low temperature. And magnetic abrasive powder was fabricated from the Sr-Ferrite which was crushed into 200 mesh. The XRD analysis result shows that only SiC abrasive and Sr-Ferrite crystal peaks were detected, explaining that resin bond was not any more to contribute chemical reaction. From MACRO analysis, we found that SiC abrasive and Sr-Ferrite were strongly bonding with each other.

• Textile Coloration and Finishing
• /
• v.33 no.3
• /
• pp.161-167
• /
• 2021

Polymer nanocomposite is considered a great alternative to solve the limitations that exist in a simple combination material, as well as to produce multifunctional and high-performance results. In this research, PVA/bentonite nanocomposite films were prepared based on the presence or absence of modification of nano-clay(bentonite) a SUPERGEL^® product, modification conditions and content, and the structural variation of the prepared PVA/bentonite nanocomposite films were examined. The effect of variations in the internal structure of the nanocomposite on mechanical and thermal properties was investigated. As a result of evaluating the thermal characteristics of the PVA/bentonite nanocomposite film based on the concentration of the modified bentonite, it was verified that the thermal characteristics and stability were improved because of interaction between the polymer and the modified nano-clay.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.398-406
• /
• 2007

Constructing high buildings is a global trend, and skyscrapers for residing are also increasing. But a period of works for finish construction is different depending on a company while a period of works for frame construction of skyscrapers for residing in the country is regular when considering a difference of a method of construction, and the increase of repeated construction for high buildings and number of related process for finish construction are stressing the importance of improving productivity through construction management and plan for works. Because there are many compositive factors affecting productivity other than technical factors, we should intensively study the way of improvement and prevention preferentially through analyzing factors affecting productivity. So in this study, we present important management factors for making systematic strategy and plan for improvement of productivity by finding factors affecting productivity depending on the degree of importance unifying factors affecting productivity of plan factor(internal factor of construction process) and management factor(outer factor of construction process).

• Tuberculosis and Respiratory Diseases
• /
• v.57 no.5
• /
• pp.411-418
• /
• 2004

Background : Cigarette smoking is the single biggest avoidable cause of death and disability in most countries. Effective prevention of cigarette Smoking and help for those wishing to quit can therefore yield enormous health benefits for populations and individuals. Although most of smokers try to stop smoking for themselves, the success rate of quitting smoking is very low. Promoting and supporting smoking cessation should be an important health policy priority for healthcare professionals in all clinical settings. In this study, we tried to evaluate the effect of the educational program for smoking cessation of our hospital, the smoking pattern, and characteristics of adult smokers enrolled in the program. Methods : We enrolled 640 smokers, who has visited the '5 day stop smoking school' for smoking cessation from Jan 1998 to 2001. we evaluated the characteristics of the smokers based on the self report questionnaire at the beginning of the program and we also checked 100 smokers, enrolled in Inpatient Smoking Cessation Educational program, their smoking behavior and the cessation rate with postal questionnaire after finishing this program from Nov 2002 to Jan 2003. Results : The health was most common motivation for smoking cessation. The stress was the most important motivation of smoking. The overall smoking cessation rate of the smokers enrolled in inpatient smoking cessation school was 60%. The age of starting smoking and the kind of occupation have a significant difference between the success group and failure group of smoking cessation. Conclusion : The inpatient smoking cessation program was effective smoking cessation intervention in the adult smokers who enrolled in '5 day stop smoking school'.

• Journal of Sericultural and Entomological Science
• /
• v.34 no.2
• /
• pp.32-40
• /
• 1992

Many studies have been carried out on the graft finishing in order to improve the quality of silk fiber. Various vinyl monomers, for instance, styrene, methylmethacrylate, 2-hydroxyeth-ylmethacrylate and methacrylamide, have been used practically up to date. Among these monomers, methacrylamide has been applied as the most favourable monomer onto silk fibers in recent years. The polymerization mechanism about styrene- and methylmethacrylate-grafted silk fiber has been studied by many researchers. They proposed that free radicals were formed and vinyl monomers were polymerized in silk fibroin by graft polymerization mechanism, while active sites were varied by the types of monomer and initiator as well as by the reaction condition. In general. there is another Opinion that monomers are polymerized and impregnated in the internal side of the fiber by homopolymerization, which has not been proved experimentally yet More than 10 years have been passed since methacrylamide was applied on the silk fiber, and at the present time most finishings are being achieved by methacrylamide. However, no attention has been paid to the polymerization mechanism of the methacrylamide-treated silk fiber yeL In this paper, the treatments of methacrylamide on silk fibers were studied in aqueous solution using potassium persulfate as an initiator. The polymerization mechanism of the methacrylamide-treated silk fibers was investigated and analyzed on the basis of the results of infrared spectroscopy, amino acid analysis and scanning electron microscopy. From the results of these instrumental analyses, it can be suggested that polymerization mechanism about the methacrylamide-treated silk fibers is not performed by graft polymerization which has been accepted generally in styrene and methylmethacrylate-grafted silk fibers. The different mechanism is supposed to be due to the difference in monomer types, initiator types and treatment conditions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.10
• /
• pp.1396-1404
• /
• 2017

Objective: This study was determined the influence of virginiamycin supplementation on growth-performance and characteristics of digestion of cattle with decreasing dietary net energy value of the diet for maintenance ($NE_m$) from 2.22 to 2.10 Mcal/kg. Methods: Eighty crossbred beef steers ($298.2{\pm}6.3kg$) were used in a 152-d performance evaluation consisting of a 28-d adaptation period followed by a 124-d growing-finishing period. During the 124-d period steers were fed either a lesser energy dense (LED, $2.10Mcal/kg\;NE_m$) or higher energy dense (HED, $2.22Mcal/kg\;NE_m$) diet. Diets were fed with or without 28 mg/kg (dry matter [DM] basis) virginiamycin in a $2{\times}2$ factorial arrangement. Four Holstein steers ($170.4{\pm}5.6kg$) with cannulas in the rumen (3.8 cm internal diameter) and proximal duodenum were used in $4{\times}4$ Latin square experiment to study treatment effects on characteristics of digestion. Results: Neither diet energy density nor virginiamycin affected average daily gain (p>0.10). As expected, dry matter intake and gain efficiency were greater (p<0.01) for LED- than for HED-fed steers. Virginiamycin did not affect estimated net energy value of the LED diet. Virginiamycin increased estimated NE of the HED diet. During daylight hours when the temperature humidity index averaged $81.3{\pm}2.7$, virginiamycin decreased (p<0.05) ruminal temperature. Virginiamycin did not influence (p>0.10) ruminal or total tract digestion. Ruminal (p = 0.02) and total tract digestion (p<0.01) of organic matter, and digestible energy (p<0.01) were greater for HED vs LED. Ruminal microbial efficiency was lower (p<0.01) for HED vs LED diets. Conclusion: The positive effect of virginiamycin on growth performance of cattle is due to increased efficiency of energy utilization, as effects of virginiamycin on characteristics of digestion were not appreciable. Under conditions of high ambient temperature virginiamycin may reduce body temperature.

• Journal of architectural history
• /
• v.27 no.2
• /
• pp.89-100
• /
• 2018

The stylobate for expanding the external stage area was the most frequently installed installment out of the installments installed for royal court ceremonies. The stylobate was installed for various ceremonies such as funeral rites, ancestral rites, customary formalities, state examination, feasts for celebrating a honored guest of the court, queen's silkworm cultivating ceremony, heir appointment, the presentation of honorary titles for the king or queen in honor of their merits, and entertainment of foreign dignitaries. The exact period stylobates came to be used for the play stage. The stylobate consists of the 紅座板, 屯太木, 竹欄間, 足木, and the 層橋. Depending on the 足木, the substructure of the stylobate, the stylobate could be divided into the 長足木, 中足木, 短足木, 平足木 type. The detail structure of the stylobate changed in form from the jokmok and duntaemok that appeared until the time of King Seonjo, into the 長屯太木, 短屯太木, and the 短短屯太木 during the time of King Heonjong. With the introduction of the 中足木, materials began to become more segmented and the structure stronger. According to existing records, while the height of the stylobate was not significantly high prior to King Seonjo's reign, the 十四層雲橋 and the 十三層層橋 introduced during the time of Emperor Gojong was designed to reflect his rank in external ceremonies while the eight story step bridge was exhibited in internal ceremonies to reflect the rank of Queen Mother Sinjeong. From here, we can deduce that the fourteen and thirteen story cloud bridges representing the king was of a higher grade than the eight story step bridge which represented the queen mother. Finishing by adding boards to the lower part of the stylobates began to appear in the time of King Seonjo. During King Heonjong's reign, the lower finish became gentrified with a thin board called 修粧板, and yeomupan 廉隅板 for decorating the edges of the stylobates were installed. Such style of finishing the lower part of the stylobate with boards mostly appeared in elaborate feasts 進饌 and celebrations 進宴 within the royal court 內宴. The stylobates appeared to have served not only practical purposes such as expanding the stage area, but also as installments which realize the authority and prestige of the royal crown. They were installed according to the purpose of the ceremony and the rank of the participant. In short, stylobates became established during King Seonjo's reign, became segmented and gentrified during King Heonjong's reign, and began to take height variations during Emperor Gojong's reign to reflect the rank and authority of the king and queen mother. As such, it can be considered another characteristic of Joseon Dynasty architecture.