• Smart Structures and Systems
• /
• 제32권4호
• /
• pp.235-251
• /
• 2023

A method that can estimate global deformation and internal forces using a limited amount of displacement data and based on the shape superposition technique and a neural network has been recently developed. However, it is difficult to directly measure sufficient displacement data owing to the limitations of conventional displacement meters and the high cost of global navigation satellite systems (GNSS). Therefore, in this study, the previously developed estimation method was extended by combining displacement, slope, and strain to improve the estimation accuracy while reducing the need for high-cost GNSS. To validate the proposed model, the global deformation and internal forces of a cable-stayed bridge were estimated using limited multi-response data. The effect of multi-response data was analyzed, and the estimation performance of the extended method was verified by comparing its results with those of previous methods using a numerical model. The comparison results reveal that the extended method has better performance when estimating global responses than previous methods.

• 대한기계학회논문집A
• /
• 제26권6호
• /
• pp.1099-1106
• /
• 2002

This paper provides engineering J-integral and crack opening displacement (COD) estimation equations for circumferential through-wall cracked pipes under internal pressure and under combined internal pressure and bending. Based on selected 3-D finite element calculations for the circumferential through-wall cracked pipes under internal pressure using the idealized power law materials, the elastic and plastic influence functions for fully plastic J-integral and COD solutions are found as a function of the normalized crack length and the mean radius-to-thickness ratio. These developed GE/EPRI-type solutions are then re-formulated based on the enhanced reference stress method. Such re-formulation not only provides simpler equations for J-integral and COD estimations, but also can be easily extended to combined internal pressure and bending. The proposed equations are compared with elastic-plastic finite element results using actual stress-strain data, which shows overall excellent agreement.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권5호
• /
• pp.453-457
• /
• 2006

This study was designed to investigate the effect of intra-articular injection of hyaluronic acid for the treatment of internal derangements of the temporomandibular joint(TMJ). Sixteen patients with internal derangements of TMJ in 1 male and 15 females aged 68 to 18 years comprised the study material. The patients' complaint was limited mouth opening and pain during function. Patients were divided into 3 groups(articular disc displacement with reduction, articular disc displacement without reduction, osteoarthritis group). The preauricular area was disinfected anesthetized locally with 2% lidocaine hydrochloride. Arthrocentesis was performed. Hyaluronic acid(1.5 ㏄) was then injected into the superior compartment of the TMJ. Active range of motion exercises were instituted at approximately 24 hours postoperatively. Antibiotics and NSAID, three times daily by mouth, was prescribed for 3 days. Clinical evaluation of the patients was done before the procedure, immediately after the procedure, final follow-up visit postoperatively. Pain during function was assessed using visual analog scales(VAS). Maximal mouth opening was recorded as a distance between upper incisal edge and lower incisal edge. Intra-articular injection of hyaluronic acid caused significant reduction of pain during function, significant increase of maximal opening range. These findings suggest that intra-articular injection of hyaluronic acid is useful for decreasing patient reports of pain while increasing functional mobility of the mandible in internal derangements of the TMJ.

• 대한기계학회논문집B
• /
• 제29권7호
• /
• pp.784-794
• /
• 2005

In the very low specific speed range ($n_s=0.24$ < 0.25, non-dimensional), the efficiency of centrifugal pump designed by a conventional method is very low in common. Therefore, positive-displacement pumps have long been used widely. Recently, since the centrifugal pumps are becoming higher in rotational speed and smaller in size, there expects to develop a new centrifugal pump with a high performance to replace the positive-displacement pumps. The purpose of this study is to investigate the internal flow characteristics of a very low specific speed centrifugal pump and to examine the effect of internal flow pattern on pump performance. The results show that the theoretical head definition of semi-open impeller should be revised by the consideration of high slip factor in the semi-open impeller, and the leakage flow through the tip clearance results in a large effect on the impeller internal flow. Strong reverse flow at the outlet of semi-open impeller reduces the absolute tangential velocity considerably, and the decreased absolute tangential velocity increasese the slip factor with the reduction of theoretical head.

• 대한치과보철학회지
• /
• 제51권4호
• /
• pp.315-322
• /
• 2013

연구 목적: 내측연결형 임플란트와 지대주의 연결체에 반복하중을 부여하였을 때 수직 침하를 평가하고자 하였다. 연구 재료 및 방법: 외측연결형 임플란트와 내측연결형 임플란트에 세 종류의 시멘트유지형 지대주를 각각 장착하였다. 즉, 외측연결형 지대주(Ext 그룹), 내측연결형 1-piece 지대주(Int-1 그룹), 내측연결형 2-piece 지대주(Int-2 그룹)를 사용하였으며, 각 그룹마다 7개의 시편을 준비하였다. 임플란트-지대주 연결체에 수직하중을 적용하기 위하여 임플란트 받침대에 고정한 후, 4 Hz의 빈도로 $150{\pm}10N$의 반복하중을 가하였다. 수직침하량은 0, 5, 10, 50, 100, 1,000, 5,000, 10,000회의 반복하중 후에 각각 측정하였다. 반복측정분산분석(RM-ANOVA)를 이용하여 반복하중의 영향을 분석하였으며, 패턴변화를 관찰하기 위하여 선형혼합모형(linear mixed model)을 사용하였다. 유의수준은5% 로 설정하였다. 결과: 10,000회 반복하중 후 수직침하량은, Ext 그룹에서 $0.714{\pm}0.488{\mu}m$, Int-1그룹에서 $5.286{\pm}1.604{\mu}m$, Int-2 그룹에서 $11.429{\pm}1.902{\mu}m$를 나타내었다. 패턴분석에서는, Int-1 그룹 및 Int-2 그룹에서 지속적인 수직침하가 관찰되었으며, Ext그룹에서는 수직침하현상이 관찰되지 않았다. 결론:10,000회 반복하중 후의 선형혼합모형을 통한 분석에서, Ext그룹은 수직침하현상을 보이지 않았으나, Int-1 및 Int-2 그룹은 지속적인 수직침하현상을 나타내었다. 또한, Int-2그룹에서 Int-1그룹보다 더 많은 수직침하량이 관찰되었다.

• Structural Engineering and Mechanics
• /
• 제52권6호
• /
• pp.1135-1156
• /
• 2014

The ratcheting effect greatly challenges the design of piping components. With the assistance of the quasi-three point bending apparatus, ratcheting and the ratcheting boundary of pressurized straight Z2CND18.12N stainless steel pipe under bending loading and vertical displacement control were studied experimentally. The characteristics of progressive inelastic deformation in axial and hoop directions of the Z2CND18.12N stainless steel pipes were investigated. The experiment results show that the ratcheting strain occurs mainly in the hoop direction while there is less ratcheting strain in the axial direction. The characteristics of the bending ratcheting behavior of the pressure pipes were derived and compared under load control and displacement control, respectively. The results show that the cyclic bending loading and the internal pressure affect the ratcheting behavior of the pressurized straight pipe significantly under load control. In the meantime, the ratcheting characteristics are also highly associated with the cyclic displacement and the internal pressure under displacement control. All these factors affect not only the saturation of the ratcheting strain but the ratcheting strain rate. A series of multi-step bending ratcheting experiments were conducted under both control modes. It was found that the hardening effect of Z2CND18.12N stainless steel pipe under previous cyclic loadings no matter with high or low displacement amplitudes is significant, and the prior loading histories greatly retard the ratcheting strain and its rate under subsequent loadings. Finally, the ratcheting boundaries of the pressurized straight Z2CND18.12N stainless steel pipe were determined and compared based on KTA/ASME, RCC-MR and the experimental results.

• Structural Engineering and Mechanics
• /
• 제11권6호
• /
• pp.591-604
• /
• 2001

In this paper, a finite element with embedded displacement discontinuity which eliminates the need for remeshing of elements in the discrete crack approach is applied for the progressive fracture analysis of concrete structures. A finite element formulation is implemented with the extension of the principle of virtual work to a continuum which contains internal displacement discontinuity. By introducing a discontinuous displacement shape function into the finite element formulation, the displacement discontinuity is obtained within an element. By applying either a nonlinear or an idealized linear softening curve representing the fracture process zone (FPZ) of concrete as a constitutive equation to the displacement discontinuity, progressive fracture analysis of concrete structures is performed. In this analysis, localized progressive fracture simultaneous with crack closure in concrete structures under mixed mode loading is simulated by adopting the unloading path in the softening curve. Several examples demonstrate the capability of the analytical technique for the progressive fracture analysis of concrete structures.

• International Journal of Control, Automation, and Systems
• /
• 제3권1호
• /
• pp.70-78
• /
• 2005

This paper presents hybrid control of displacement and force in a Medical Tele-Analyzer by disturbance observer-based controller which is robust to internal and external disturbances; model uncertainty, load, and friction for instances. The developed Medical Tele-Analyzer consists of 2 subsystems; doctor-side subsystem and patient-side subsystem. In the doctor side subsystem, an array of displacement sensor is equipped to detect movement of doctor's hand and fingers. The detected information is transmitted to the patient side to be used in medical analysis. On the other hand, the patient-side subsystem consists of an array of displacement actuators, which is used to follow displacement of doctor's hand and fingers. An array of force sensors is used to detect forces between patient and the equipment. Since displacement control in patient side is coupled with force control in doctor side and vice-versa, design of the controller has to take into account this coupling. Not only using in medical tele-analysis, the proposed system can also be used in any tele-displacement-force controls of industrial processes.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권4호
• /
• pp.373-382
• /
• 2000

Temporomandibular disorders arised from joint itself was caused by inflammation or mechanical irritation of the retrodiskal tissues. Histologic changes of the retrodiskal tissues of temporomandibular joint(TMJ) internal derangement, such as inflammatory cell infiltration, hyalinization, myxoid change, fatty change, arterial obliteration, and so on, were reported, but relationships between magnetic resonance imaging(MRI) findings and histologic findings of the retrodiskal tissue were few reported. The purpose of this study was to find histologic changes of the retrodiskal tissues for status of joint and joint effusion in MRI of the temporomandibular joint which had surgical treatment. Materials were surgically treated 52 temporomandibular joints with internal derangement or osteoarthritis in TMJ clinic, Yongdong Severance Hospital. All joints were confirmed by magnetic resonance T1- and T2-weighted imagings bofere surgery. Status of joint was categorized by normal position, disc displacement with reduction, disc displacement without reduction, disc displacement without reduction associated with osteoarthrosis using preoperative MR T1-weighted images. Magnetic resonance evidence of joint effusion was observed in T2-weighted images and classified by its amount; degree 0(not observed), degree 1(small amount), degree 2(moderate amount), degree 3(large amount). Histologic features were observed whether the retrodiskal tissue has inflammatory cell infiltration, myxoid change, hyalinization, chondroid metaplasia and arterial obliteration. The distribution of elastic fibers were also observed. The results were as follows; 1. Inflammatory cell infiltration was not observed in any retrodiskal tissues. 2. MRI findings such as status of joint and evidence of joint effusion did not have significant relationship with myxoid change, hyalinization, chondroid metaplasia, arterial obliteration of the retrodiskal tissues. 3. Hyalinization and chondroid metaplasia were found in 8 joints(15.4%) and 5 joints(9.6%). All of them were found in disc displacement without reduction and disc displacement without reduction associated with osteoarthrosis. 4. Arterial obliteration was observed more frequently in disc displacement without reduction(55.6%) than disc displacement without reduction associated with osteoarthrosis(28.6%). Further studies with proper controls and more materials will be necessary.

• 한국지반환경공학회 논문집
• /
• 제11권11호
• /
• pp.37-45
• /
• 2010

본 연구에서는 서해안 ${\bigcirc}{\bigcirc}$지역에서 IPS 지지방식과 Strut 지지방식으로 시공한 현장의 계측에 의한 수평변위량을 수치해석상의 예측치와 비교하고, 실무에서 널리 사용되고 있는 탄소성보법 해석 프로그램(SUNEX, EXCAV)을 이용하여 해석치를 상호 비교분석 하였다. 또 최대수평변위에 대한 여러 제안값 중 점토지반에 적용한 제안값과 비교한 결과, IPS 지지 방식과 Strut지지방식에 의한 최대 수평변위는 IPS지보형식이 Strut지보형식보다 더 크게 발생하였으며, SUNEX 프로그램 해석치와 EXCAV 프로그램 해석치를 상대 비교했을 때 SUNEX 프로그램이 더 크게 해석되었지만, 점토층에서의 기존 제안값인 0.5%H 에는 더 근접하다는 결론을 얻었다. 이는 SUNEX 프로그램이 해석 시 지보형식이나 사용하는 부재 보다는 토질 정수 중 내부마찰각(${\Phi}$)에 의해 수평변위값이 영향을 받기 때문이라 판단된다. 즉 내부 마찰각이 큰 사질토 지반에서는 수평변위값이 작게 발생하고, 내부 마찰각이 작은 점성토 지반에서는 수평변위가 크게 해석되어 상호 비교 시 사질토 지반에서는 EXCAV가 크게 나타나고 점성토 지반에서 SUNEX가 크게 나타났다고 판단된다. 또한, 기존 제안 값 중 점성토에 적용한 0.5%H와 비교 시 현장계측치는 평균 141%, SUNEX로 예측한 결과치는 평균 78.1%, EXCAV로 예측한 결과치는 평균 18.1% 범주에 분포함을 확인하였다. 따라서, 흙막이 가시설 설계 시사용하고 있는 해석 프로그램으로 산정한 수평변위량이 실제 현장에서 계측한 변위량을 과소 예측하므로 지반거동을 모사하는데 주의를 요한다. 추후 보다 정밀한 유한요소해석 등을 통하여 실제 거동의 예측 가능성을 평가해야 할 것이다.