• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.95-100
• /
• 1996

This paper presents the experimental study on hardening process of high-strength and high-flowable concrete. The experiments were performed to investigate any unfavorable construction situations since the actual concrete placement has been scheduled in cold weather period, so that the high quality concrete construction is convinced to be successfully carried out. The tests were conducted using 600nm and 1000nm height of steel tube to simulate the practical concrete filled steel tube columns according to the following variables as: the categories of chemical admixtures, curing temperatures and curing schemes. The test results were analyzed in terms of hardening speed, internal heat of hydration and history of strength gain. This paper emphasizes the importance of curing schemes on durability and the use of hardening accelerators on strength gain.

• Advances in materials Research
• /
• 제12권1호
• /
• pp.1-13
• /
• 2023

The combination of cobalt ferrite and natural rubber has a potential to enhance the functional properties of rubber ferrite composites available on the market. In this study, cobalt ferrite was synthesized by the sol-gel method with tapioca starch as a cheating agent and then incorporated into natural rubber using an internal mixer. The curing characteristics, magnetic hysteresis, complex permeability, and permittivity of the rubber ferrite composites were studied as a function of the loading from 0 to 25 phr. The cure time and scorch time tended to reduce with the addition of non-reinforced cobalt ferrite fillers. The remanent and saturation magnetizations were linearly proportional to the cobalt ferrite loading, consistent with the rule of mixture. On the other hand, the increase in cobalt ferrite loading from 5 to 25 phr slightly affected the coercive field and the complex permeability. Using the maximum loading of 25 phr, both real and imaginary parts of the permittivity were significantly raised and reduced with the frequency in the 10-300 MHz range.

• 콘크리트학회논문집
• /
• 제28권3호
• /
• pp.317-328
• /
• 2016

이 연구의 목적은 내부양생을 위한 고흡수성 수지(SAP)의 혼입이 초고성능 콘크리트(UHPC)의 수화특성, 자기수축, 내구성 및 역학적 특성에 미치는 영향을 알아보는 것이다. 이를 위해 입도범위는 유사하지만 화학적 구조가 다른 2 종류의 SAP이 선택되었고, 이러한 SAP이 혼입된 UHPC의 성능이 실험을 통해 평가되었다. 평가결과는 SAP의 종류, 그리고 혼입 여부에 따라 비교되었다. 수화반응성과 수화생성물 확인을 위해 등온열량계 및 XRD를 이용한 실험이 각각 진행되었고, 이 실험을 통해 초기 재령일에서 수화반응성 및 장기 재령일에서의 수화생성물을 확인하였다. UHPC의 수축저감제로서 SAP의 적용 가능성을 확인하기 위해 자기수축 변형율, 압축강도 및 염분침투성을 측정하였다. 또한, SEM 이미지 촬영을 통해 SAP이 UHPC 내부에서 형성한 공극을 실제로 확인하고 분석하였다. 이러한 분석 및 평가결과를 통해, SAP을 이용한 내부양생은 역학적 성능과 내구성 저하 없이 UHPC의 자기수축을 저감시킬 수 있다는 결론을 내렸다. 실험에 사용된 두 종류의 SAP 중에서, UHPC 내부에서 흡수력이 더 우수한 SAP_AM이 SAP_AA 보다 수축저감성능 뿐만 아니라, 장기적인 수화반응성, 압축강도, 염분침투 저항력에서도 성능이 더 우수한 것으로 나타났다.

• 한국건축시공학회지
• /
• 제21권2호
• /
• pp.97-104
• /
• 2021

본 연구에서는 산업부산물을 전량 활용하여 포틀랜드 시멘트를 대체할 수 있는 비소성 시멘트 개발을 목표로 하였다. 이를 위해 고로슬래그 미분말과 F급 플라이애시, C급 플라이애시를 사용하여 양생방법에 따른 비소성 시멘트 모르타르의 물리적 특성에 대해 파악하였다. 연구 결과, 증기양생 후 열처리 과정을 통해 강도성능과 흡수율이 향상되는 것으로 나타났다. 결정상 분석을 통해 열처리 후 수화물의 촉진을 확인하였으며, 결합재는 치밀한 내부구조를 형성하게 된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 춘계학술논문 발표대회
• /
• pp.1-4
• /
• 2007

This study investigated the applicability of insulation curing method with double layer bubble sheets to the man concrete subjected to cold weather. Temperature history of the mass concrete indicated that the highest temperature of center section was exhibited at $34^{\circ}C$ while the that of surface section was $25^{\circ}C$. Difference between center and surface was shown to be less $10^{\circ}C$ when the temperature of center section was peak section, and thereby associated temperature cracking index was calculated 1.5, and occurrence probability of temperature cracking was 5%, so there was no temperature cracking caused by internal restraint. No temperature crack was observed by naked eye. It was clear that early frost demage and temperature cracking could be restrained due to reducing temperature difference between inner part and outside in the case double bubble sheets applied to insulation curing method in cold weather. The maturity of mass concrete is higher than outside about $72\sim89^{\circ}$ DD, so it was demonstrated to prevent early frost demage and ensure strength excellently. Insulation curing method with double bubble sheets was more economic than heating curing method.

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.7-13
• /
• 2018

콘크리트 강도는 시멘트, 물, 자갈, 모래 그리고 혼화재 등 내부영향요인뿐만 아니라 실제 현장에서 발생하는 현장기온과 타설지연시간 등 외부영향요인의 영향을 받게 된다. 본 연구의 목적은 콘크리트 배합설계 시 내부영향요인과 외부영향요인을 고려하여 현장 콘크리트 타설시 최적의 콘크리트 강도를 확보하는 것이다. 본 연구에서는 내부영향요인과 외부영향요인에 대한 수준을 정의하고, 모두 24개의 조합에 대한 콘크리트 강도 테스트를 한 후 콘크리트 강도예측 뉴럴 네트워크 모델을 개발했다. 본 콘크리트 강도예측 뉴럴 네트워크 모델은 현장 콘크리트 타설 시 현장기온과 타설지연시간을 고려하여 콘크리트 강도를 예측하는 기능을 제공한다. 본 콘크리트 강도예측 뉴럴 네트워크 모델은 내부영향요인과 외부영향요인을 분석하고 실제 현장에서 콘크리트를 타설할 때 양생온도와 타설지연시간을 뉴럴 네트워크 입력변수로 처리하여 콘크리트 강도를 예측하는 기능을 제공한다. 시공사는 콘크리트 강도예측 결과를 활용하여 콘크리트 배합을 조정함으로써 현장타설 콘크리트 강도를 관리할 수 있을 것이다.

• 한국농공학회지
• /
• 제39권6호
• /
• pp.99-110
• /
• 1997

The study was conducted in order to investigate the basic geotechnical properties of sand-bentonite mixtures with the various bentonite contents. The results obtained are as follows : 1. Optimum moisture content of sand-bentonite mixtures was approximately 17.10~18.52% corresponding to the maximum dry density of 1.58~1 .64gf/$cm^3$. As the bentonite contents and curing peroid increased, both the maximum dry density and optimum moisture content of sand-bentonite mixtures increased. 2. The unconfined compressive strength of sand-bentonite mixtures increased as the increase of bentonite content, but it did not change along the curing period. 3. The sand-bentonite mixtures ruptured at 8~15% of the axial strain and the maxi-mum shearing stress was about O.7Okgf/$cm^2$. 4. According to the increase of bentonite content, the cohesion intercept and internal friction of the sand-bentonite mixtures increased slightly in the shear test, while the cohesion intercept increased largely, and the internal friction angle decreased largely in the triaxial test. 5. Both the initial void ratio and swelling of the sand-bentonite mixtures were very low with respect to the consolidation pressure increase. 6. The swelling and shrinkage of sand-bentonite mixtures increased slightly according to the increment of bentonite content.

• Geomechanics and Engineering
• /
• 제15권1호
• /
• pp.659-668
• /
• 2018

A series of direct shear tests were implemented on three different types of specimens (i.e., clean Perth sand, sand containing 10, 20 and 30% bentonite, sand containing 1, 3 and 5% slag, and sand containing 10, 20 and 30% bentonite with increasing percentages of added slag (1%, 3% and 5%). This paper focuses on the shear stress characteristics of clean sand and sand mixtures. The samples were tested under different three normal stresses (100, 150 and 200 kPa) and three curing periods of no curing time, 7 and 14 days. It was observed that the shear stresses of clean sand and mixtures were increased with increasing normal stresses. In addition, the use of slag has improved the shear strength of the sand-slag mixtures; the shear stresses rose from 128.642 kPa in the clean sand at normal stress of 200 kPa to 146.89 kPa, 154 kPa and 161.14 kPa when sand was mixed with 1%, 3% and 5% slag respectively and tested at the same normal stress. Internal friction angle increased from $32.74^{\circ}$ in the clean sand to $34.87^{\circ}$, $37.12^{\circ}$ and $39.4^{\circ}$ when sand was mixed with 1%, 3% and 5% slag respectively and tested at 100, 150, and 200 kPa normal stresses. The cohesion of sand-bentonite mixtures increased from 3.34 kPa in 10% bentonite to 22.9 kPa, 70.6 kPa when sand was mixed with 20% and 30% bentonite respectively. All the mixtures of clean sand, different bentonite and slag contents showed different behaviour; some mixtures exhibited shear stress more than clean sand whereas others showed less than clean sand. The internal friction angle increased, and cohesion decreased with increasing curing time.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.1001-1004
• /
• 2008

본 연구는 한중환경에서 이중 버블시트를 이용한 단열보온 양생 공법을 슬래브 및 매스 콘크리트에 활용한 결과를 검토한 것이다. 먼저, 이중 버블시트를 적용한 경우 타설 후 2일까지 외기온이 영하$9^{\circ}C$까지 강하하는 경우에도 슬래브콘크리트는 영상 $6^{\circ}C$에서 $10^{\circ}C$이상을 유지하여 초기동해가 방지됨을 알 수 있었고, 매스콘크리트의 경우에는 중심부 최고온도와 표층부 최고온도차이가 $6^{\circ}C$이하로 나타나 내부구속에 의한 수화열 균열은 발생하지 않은 것으로 판단된다. 본 현장에 적용된 이중버블시트를 이용한 단열보온양생 공법은 동절기 영하에서도 안정된 양생온도 관리로 초기동해를 방지할 수 있었고, 소요강도를 확보할 수 있었다. 또한, 가시설의 설치 해체 공정을 줄여 공기단축 효과와 인건비절감등 양생비용의 감소로써 한중콘크리트의 품질확보에 우수한 효과가 있음과 동시에 단열 양생공법의 경제성이 입증되었다.

• 대한한방내과학회지
• /
• 제19권2호
• /
• pp.438-450
• /
• 1998

Pleural effusion means the inflammation of pleura which has a majority of respiratory disease. The main clinical manifestation is pleural effusional pain, dyspnea, cough, fever, etc. and at present the Tuberculous pleural effusion has the most frequency in which exists exudate in our country. And during studying oriental medical treatment about Tuberculous exudative pleural effusional patient, we found the clinical case about The Combination therapy of Chinese traditional and Western medicine at journal of traditional Chinese Medicine and considered it would be help in oriental medical treatment, so we adjust and report now. This study was performed by analyzing the six papers reported centering around the clinical case of The Combination therapy of Chinese traditional and Western medicine in journal of traditional Chinese Medicine published between 1990-1996. As these papers have no mistakes on diagnosis because it obtained pleurocentesis, tuberculin test positive reaction on choicing clinical case, definite results on X-ray, ultrasound as well as clinical basis, so it considers an apt conclusion. The results were as follows: 1. Western medical treatment uses chemical remedy same with pulmonary tuberculosis, and in case of tubercular pleuritis, it needs thoracic duct pyorrhea, and according to simple exudation also operates therapheutic pleural paracentesis. 2. In case of hydrothorax absorption about tuberculous pleural effusion, prescription of purge the heat accumulated in the lung and eliminate the retention of fluid with powerful purgatives shows considerable effects. 3. The latter period treatment of tuberculous pleural effusion needs Supplement qi and active the collaterals, Nourishing yin and clearing heat in addition to Supporting healthy energy to eliminate evils. 4. In case of curing tuberculous pleural effusion, The Combination therapy of Chinese traditional and Western medicine shows more considerable effect than single western medical treatment in absorption of hydrothorax. 5. In case of curing tuberculous pleural effusion, The Combination therapy of Chinese traditional and Western medicine shows more considerable effect than single western medical treatment in prevention of disease reappearance. 6. In case of curing tuberculous pleural effusion, The Combination therapy of Chinese traditional and Western medicine shows more considerable effect than single western medical treatment in vitality recovery at the latter period of disease.