• 대한기계학회논문집
• /
• 제18권4호
• /
• pp.933-945
• /
• 1994

A shock-wave in a supersonic flow can be theoretically determined by a given pressure ratio at upstream and downstream flowfields, and then the obtained shock-wave is stable in its position. Under the practical situation in which the shock-wave interacts with the boundary layer along a solid wall, it cannot, however, be stable even for the given pressure ratio being independent of time and oscillates around a time-mean position. In the present study, oscillations of a weak normal shock-wave in a supersonic diffuser were measured by a Line Image Sensor(LIS), and they were compared with the data of the wall pressure fluctuations at the foot of the shock-wave interacting with the wall boundary layer. LIS was incorporated into a conventional schlieren optical system and its signal, instantaneous displacement of the interacting shock-wave, was analyzed by a statistical method. The results show that the displacement of an oscillating shock-wave increase with the upstream Mach number and the dominant frequency components of the oscillating shock-wave are below 200 Hz. Measurements indicated that shock-wave oscillations may not entirely be caused by the boundary layer separation. The statistical properties of oscillations appeared, however, to be significantly affected by shock-induced separation of turbulent boundary layer.

• 대한기계학회논문집B
• /
• 제24권8호
• /
• pp.1119-1127
• /
• 2000

Convective heat transfer in a channel filled with porous media has been analyzed in this paper. The two-equation model is applied for the heat transfer analysis with the velocity profile, considering both the inertia and viscous effects. Based on a theoretical solution, the effect of the velocity profile on the convective heat transfer is investigated in detail. The Nusselt number is obtained in terms of the relevant physical parameters, such as the Biot number for the internal heat exchange, the ratio of effective conductivities between the fluid and solid phases, and hydraulic boundary layer thickness. The results indicate that the influence of the velocity profile is characterized within two regimes according to the two parameters, the Biot number and the conductivity ratio between the phases. The decrease in the heat transfer due to the hydraulic boundary layer thickness is 15% at most within a practical range of the pertinent parameters.

• 한국세라믹학회지
• /
• 제53권6호
• /
• pp.682-688
• /
• 2016

In $TiO_2$-CuO systems, low-temperature sinterability was investigated by a conventional sintering method. Sintering temperatures were set at under $950^{\circ}C$, at which the volume diffusion is inactive. The temperatures are less than the melting point of Ag ($961^{\circ}C$), which is often used as an internal conductor in low-temperature co-fired ceramic technology. To optimize the amount of CuO dopant, various dopant contents were added. The optimum level for enhanced densification was 2 wt% CuO. Excess dopants were segregated to the grain boundaries. The segregated dopants supplied a high diffusion path, by which grain boundary diffusion improved. At lower temperatures in the solid state region, grain boundary diffusion was the principal mass transport mechanism for densification. The enhanced grain boundary diffusion, therefore, improved densification. In this regard, the results of this study prove that the sintering mechanism was the same as that of activated sintering.

• 대한토목학회논문집
• /
• 제13권3호
• /
• pp.25-34
• /
• 1993

지하구조물은 일반적으로 영역의 무한성, 다양한 하중, 복합적인 구성재료 등으로 인하여 그 거동의 해석이 난이하다. 특히, 장기거동이 중요시되는 연약지반의 굴착문제 등에 있어서는 시간에 의존하는 점탄소성거동을 해석에 고려하여야만 한다. 본 연구에서는 점탄소성거동을 해석하는 방법으로서, 내부요소를 사용하지 않은 경계요소 해석방법을 유도하고, 정계요소와 유한요소를 조합하여 해석하는 방법을 도출하였다. 점탄소성을 고려한 지배적분방정식에서 점소성응력에 대한 영역적분은 극좌표를 이용한 직접적분방법을 적용하여 경계적분화하였고, 이에 따른 계방정식을 이용하여 프로그램화하였다. 또한 경제요소 프로그램을 점소성 유한요소 프로그램과 조합하여 굴착면 주위에 발생하는 시간의존 비탄성거동을 합리적으로 해석하도록 하였다. 경계요소해석 및 조합해석 결과는 정해 및 유한요소해석의 결과와 비교하여 검토하였다. 비교결과 내부요소를 사용하지 않은 경계요소법으로는 국부적인 응력집중으로 인한 비선형성이 충분히 고려되지 못함을 알 수 있었다. 반면에 유한요소-경계요소 조합방법으로는 상대적으로 많은 자유도를 가진 타 방법에 비교하여 합리적인 결과를 얻음을 알 수 있었다. 따라서 시간에 의존되는 비탄성체의 해석에 있어서 조합방법을 사용하면 하중조건과 경계조건에 따르는 구조물의 거동을 합리적으로 예측할 수 있으며, 유한요소와 경계요소의 장점을 살려 보다 효용적인 해석의 수행이 가능할 것으로 판단된다.

• 동력기계공학회지
• /
• 제21권6호
• /
• pp.5-12
• /
• 2017

The steady-state, incompressible and three-dimensional numerical analysis was carried out to investigate the internal flow fields characteristics according to wind tunnel contraction type. The turbulence model used in this study is a realizable $k-{\varepsilon}$ modified from the standard $k-{\varepsilon}$ model. As a results, the distribution of the axial mean velocity components along the central axis of the flow model is very similar to the ASME and BE types, and the cubic and cosine types. When the flow passes through the interior space of the analytical models, the flow resistance at the inlet of the plenum chamber is the largest at BS type contraction, but the smallest at cubic type contraction. The boundary layer thickness is the smallest in the cosine type contraction as the axial distance increases. The maximum turbulent kinetic energy in the test section is the smallest in the order of the contraction of cubic type and cosine type. Comprehensively, cubic type contraction is the best choice for wind tunnel performance, and cosine type contraction can be the next best solution.

• 한국수소및신에너지학회논문집
• /
• 제23권6호
• /
• pp.688-695
• /
• 2012

The present study represents the effects of boundary condition on the performance of a centrifugal blower at the interference plane between rotational and stationary domains using three dimensional compressible Navier-Stocks equations. Two boundary conditions, frozen-rotor and stage, are compared to analyze the blower performance. Installation angle between the cutoff of a volute casing and a impeller blade is also introduced to evaluate the blower performance and to understand the internal flow inside the blower. Throughout numerical simulation, it is found that the frozen rotor interface method at the interference plane represents well the variations of flow field inside the blower compared to stage interface method. However, pressure has maximum two percent error according to the installation angles while pressure is almost constant for the stage interface method. And stage interface method can relatively well predict the blower performance. Detailed internal flows of the centrifugal blower are compared and analyzed by numerical simulation.

• 복식
• /
• 제60권3호
• /
• pp.110-122
• /
• 2010

The purpose of this study is to analyze the expressional traits and internal meanings of fake design in the 2000s' fashion, based on study of art and design area. For achieving the purpose, this study performed related research works and a demonstrative analysis of fashion collection photographs. The scope of this study is from 2000 to 2009. The results are as follows. Fake design uses trompe-l'oeil which is an art technique related to the meanings of 'deceive or fool the eye'. This eye-deceiving technique has been used for a long time in the art, and particularly noticed as one of techniques of Surrealism. Art works using trompe-l'oeil express familiar and unreasonable world at the same time, and also the fusion of reality and fabrication. Fake design in design area of the 2000s makes people take daily life in unfamiliar way by unusualness and breaking the boundary between real and fake. By fake design, people can enjoy fun and a sense of freedom with amusement rather than unpleasant of being deceived. Fake design in the fashion of the 2000s uses eye-deceiving technique and also focuses on the concept of 'fake'. The expressional traits were categorized as realistic expression, surrealistic expression and fake value expression. The internal meanings were analyzed as breaking boundary between real and fake, rediscover dailiness, new attitude to traditional thinking. In conclusion, fake design in the fashion of the 2000s gives playfulness, fun, feeling of release and will be pursued continually.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.581-586
• /
• 2000

The equivalent source method is used to calculate the internal pressure field for an enclosure which can have arbitrary boundary conditions and may include internal objects which scatter the sound. Some of the equivalent positions are chosen to be the same as the first order images of the source inside the enclosure, some are positioned on a spherical surface some distance outside the enclosure. The normal velocity on the surfaces of the enclosure walls is evaluated at a larger number of positions than there are equivalent sources. The sum of the squared difference between this velocity and the expected is minimized by adjusting the strength of the equivalent sources. The convergence of this method is checked by evaluating the velocity error at a larger number of monitoring positions. Example results are presented for various numbers of sources and evaluation points. The results showed that in general the more equivalent sources increased the accuracy of the sound field predictions but the accuracy is not too much sensitive to the numbers of evaluation points.

• 동력기계공학회지
• /
• 제22권1호
• /
• pp.11-17
• /
• 2018

The steady-state, incompressible and three-dimensional numerical analysis was carried out to evaluate the internal flow fields characteristics of wind tunnel contractions made by Morel's curve equations. The turbulence model used in this study is a realizable ${\kappa}-{\varepsilon}$ well known to be excellent for predicting the performance of the flow separation and recirculation flow as well as the boundary layer with rotation and strong back pressure gradient. As a results, when the flow passes through the interior space of the analytical models, the flow resistance at the inlet of the plenum chamber is the largest at $Z_m=300$, 400 mm, but the smallest at $Z_m=700mm$. The maximum turbulence intensity in the test section is about 2.5% when calculated by the homogeneous flow, so it is improved by about 75% compared to the 10% turbulence intensity at the inlet of the plenum chamber due to the contraction.

• 말소리와 음성과학
• /
• 제6권2호
• /
• pp.141-151
• /
• 2014

This study reports anti-hierarchical initial-syllable lengthening of an utterance-internal phrase in Korean. That is, the phrase-initial syllable (e.g., /a/ of "apa-do" or /ma/ of "mapa-do") starting with a voiced phoneme (i.e., vowels or voiced consonants) manifests itself as significantly longer when it is preceded by another phrase without a pause than when it leads an utterance or follows a pause utterance-internally. The phenomenon was examined with regard to two other factors: (1) tempo and (2) tenseness of the consonant (/p, $p^{\prime}$, $p^h$/) following the target syllable /a/. First, the effect of tempo on initial lengthening was not significant. Apart from the statistical significance, however, a tendency was observed, i.e., the slower the tempo is, the greater the lengthening. By contrast, the faster the tempo is, the higher the ratio (%) of lengthening. Second, contrary to our expectations, initial-syllable lengthening was even greater before tense stops /$p^{\prime}$, $p^h$/ than before lax stop /p/ regardless of tempo, and it was remarkable when it comes to the ratio (%), which means that initial lengthening is free of the pre-consonantal vowel shortening effect. Final-syllable lengthening is a pre-boundary marker, while the initial-syllable lengthening is regarded as a post-boundary marker of a phrase.