• Journal of Animal Science and Technology
• /
• 제54권1호
• /
• pp.43-49
• /
• 2012

본 연구는 산란계의 주령 및 난각의 형태이상 및 이상 정도가 내부품질에 미치는 영향을 조사하기 위해 실시되었다. 동일 주령의 산란계 2계군에서 56주령부터 62주령 사이에 산란한 계란 21,000개 중 각 주별 1,000개를 무작위 추출하여 축산물품질평가사가 정상란과 형태 이상란을 구분하였다. 각각의 출현율과 할란검사를 실시하여 내부품질을 조사한 결과 전체적으로 정상란은 81.22%, 이상란은 18.78%의 출현율을 보였다. 주령의 증가에 따른 이상란의 출현율은 유의적인 차이를 보이지 않았으며(p>0.05), Haugh unit은 60주령이 56주령에 비해 높게 나타났으며 그 외에는 차이가 없었다. 동일 주령대를 비교했을 경우 난백고와 Haugh unit은 형태 이상란이 낮고 또한 이상의 정도가 심한 경우 더 낮게 측정되는 결과를 보였다(p<0.05). 특히 이상란 중 기형란의 난고와 Haugh unit이 현저하게 낮은 결과를 보여 이상란 중에서도 기형란이 내부 품질이 가장 낮게 판명되었다. 결과를 종합해 보면 56~62주령 산란계로부터 생산된 계란의 외형적 이상은 내부품질의 저하와 밀접하게 상관한다고 볼 수 있으며, 현 계란 등급판정 체계에서 외관판정은 신선도 평가에 근거가 될 수 있을 것으로 보인다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.201-202
• /
• 2012

Recently, High-Strength steel reinforcement has been studied throughout the internal and external. One of the advantages using High-Strength steel reinforcement in construction is the economic effect due to the decreasing of its quantity. Also, another good effect is the increases of workability by reason of reducing the congestion. But, realistically it is not used in nuclear power plant construction site because of the restriction of design standard. The purpose of this report secures the reliability and changes the code through the performance evaluation test of the wall using the high-strength steel reinforcement in nuclear power plant.

• The Korean journal of internal medicine
• /
• 제39권4호
• /
• pp.625-639
• /
• 2024

Background/Aims: Intensive care unit (ICU) quality is largely determined by the mortality rate. Therefore, we aimed to develop and validate a novel prognostic model for predicting mortality in Korean ICUs, using national insurance claims data. Methods: Data were obtained from the health insurance claims database maintained by the Health Insurance Review and Assessment Service of South Korea. From patients who underwent the third ICU adequacy evaluation, 42,489 cases were enrolled and randomly divided into the derivation and validation cohorts. Using the models derived from the derivation cohort, we analyzed whether they accurately predicted death in the validation cohort. The models were verified using data from one general and two tertiary hospitals. Results: Two severity correction models were created from the derivation cohort data, by applying variables selected through statistical analysis, through clinical consensus, and from performing multiple logistic regression analysis. Model 1 included six categorical variables (age, sex, Charlson comorbidity index, ventilator use, hemodialysis or continuous renal replacement therapy, and vasopressor use). Model 2 additionally included presence/absence of ICU specialists and nursing grades. In external validation, the performance of models 1 and 2 for predicting in-hospital and ICU mortality was not inferior to that of pre-existing scoring systems. Conclusions: The novel and simple models could predict in-hospital and ICU mortality and were not inferior compared to the pre-existing scoring systems.

• International Journal of Quality Innovation
• /
• 제8권3호
• /
• pp.156-172
• /
• 2007

The high-tech industry is the economic lifeline for Taiwan. Its characteristics are short product life cycle, rapid changes in the market, and a high obsolescence rate for new products. Under globalization, the high-tech industry has adopted Information Technology (IT) to shorten the manufacturing process, reduce costs and conduct product research and development (R&D) to increase the core competence of enterprises and achieve the goal of sustainable operations. Enterprises should actively strengthen their integration with internal and external resources and lead in R&D management to increase industrial operating performance. Effectively managing operations and R&D management evaluation in Taiwan's High-tech Industry has become a critical subject. This study adopted 4 major Balanced Scorecard (BSC) perspectives to establish the Total Performance Evaluation Indicators for the R&D management department in Taiwan's High-tech Industry. The Analytic Network Process (ANP) was applied to evaluate the overall performance of the R&D management department. The research framework is divided into 2 phases. The first phase is combined with the 4 major perspectives, Financial, Customer, Internal Business Process and Learning and Growth, as the related indicators for each measurement perspective. The Key Performance Indicators (KPI) were selected using Factor Analysis to identify the key factor from the complicated indicators. The relationship between the characteristics of each BSC's evaluation perspective is dependence and feedback. This study applied ANP to conduct the calculation and adjustment of correlation between each KPI, and determine on their relative weights for the objective KPI. The "Financial Perspective" for R&D management department in Taiwan's High-tech Industry focused on the budget achievement rate of R&D management. The weight indicator value is (0.05863). The "Customer Perspective" focused on problem-solving satisfaction. The weight value of this indicator is (0.17549). The "Internal Business Process Perspective" focused on the quantity and quality of R&D. The weight value of this indicator is (0.13506). The "Learning and Growth Perspective" focused on improving competence in the research personnel's professional techniques. The weight value of this indicator is (0.02789). From the total weighting indicators, the order of the Performance Indicators for the R&D management department in Taiwan's High-tech Industry is: (1) Customer Perspective; (2) Internal Business Process Perspective; (3) Financial Perspective; and (4) Learning and Growth Perspective.

• 한국지역사회생활과학회지
• /
• 제20권4호
• /
• pp.469-479
• /
• 2009

New rural village development programs have been implemented, and rural village land use is expanded to encompass green-tourism, citizen and silver domicile space because of the internal and the external changes in the agricultural environment. This study was conducted to propose the evaluation index for retiree rural village development project issued by Ministry for Food, Agriculture, Forestry and Fisheries. The evaluation index was consisted of four categories (population, economic, environment, and living), which were consisted of 35 variables. The relative weight for 35 variables was calculated based on the questionnaire survey from the experts and AHP (Analytical Hierarchy Process). Growth rate of population in population criteria, job creation by exterior inflow in economics criteria, improvement of exchange between urban and rural in life criteria, and the flood outbreak in environment criteria were the most important contents of 35 variables. These results are consistent with the objectives of retiree rural village development project, and indicate the need of prevention the negative sides by implementation of the project.

• 한국항해항만학회지
• /
• 제44권5호
• /
• pp.400-406
• /
• 2020

In this study, we first measured the malmquist productivity index by DEA among the Korean public firms. Second, there are 12 public corporations whose productivity (MPI) has decreased compared to 2014. This is mainly because of a decrease in productivity, as well as a decrease in the technical efficiency change index (TECI), impacted by the internal environment, and the increase in productivity because of an increase in the technology change index (TCI) impacted by the external environment. Finally, the analysis of the impact on the management assessment scores showed that the productivity (MPI), scale efficiency (CRS), size of sales, operating profitability, and total capital investment efficiency are significantly related (+), except for the asset turnover, which is a static financial ratio. Meanwhile, the management evaluation scores between the high-productivity public corporations and low-performing public corporations were significantly discriminating. Thus, it is confirmed that the nation's state-run companies must manage their MPIs in a time series to score high in management evaluation.

• 컴퓨터교육학회논문지
• /
• 제11권6호
• /
• pp.77-84
• /
• 2008

교수학습센터는 교수자와 전문성 향상과 초중고에서 대학교 이르기까지 학교 교육의 혁신을 실천하기 위한 중요한 목표를 수행하고 있다. 본 연구에서는 초중등에서 설치된 교수학습센터에서 각 대학에서 운영되고 있는 교수학습센터에까지 교수학습센터의 성과를 효과적이고 효율적인 성과평가 모형 개발을 목적으로 하였다. 성과평가모형은 계획영역, 과정영역, 성과영역으로 구분되어있으며 각 영역별로 11가지 형식적 점검요인과 8가지 점검 내용으로 구성하여 개발하였다. 이를 바탕으로 성과평가 활용을 위한 방안을 성과평가지수와 평가실행 방법으로 제안하였다.

• Journal of the Korean Data and Information Science Society
• /
• 제21권1호
• /
• pp.87-98
• /
• 2010

본 논문은 강의평가의 타당성과 신뢰성을 측정하는 방법을 소개하고 실제자료를 이용하여 타당성과 신뢰성을 평가하였다. 기존의 강의평가 관련논문이 강의평가에 미치는 외생적인 영향을 통제하는 데 주력한 데 반해, 교원의 신분에 직접적인 영향을 미칠 수 있는 중대한 강의평가가 과연 믿을 만한 평가인가에 관한 근원적인 질문에 답하려 하였다. 전주대학교의 강의평가 결과를 실증 분석한 결과 타당성과 신뢰성 면에서 어느 정도 만족할 만한 수준임을 확인할 수 있었다. 본 논문에서는 기존에 간편하게 사용되던 신뢰성 측도가 아닌 일반화가능도 계수를 이용하여 신뢰성을 평가하는 방법을 자세히 소개하고 그 장점을 설명하였다.

• 정보교육학회논문지
• /
• 제9권4호
• /
• pp.583-593
• /
• 2005

교육인적자원부는 정보통신기술 활용 교육을 주도해 나가는데 가장 중심이 되는 교사의 정보통신기술 활용 능력을 신장시키기 위해 다양한 방안들을 수립하여 추진하고 있다. 그러나 현재 시행되고 있는 교사의 정보통신기술 활용 능력 신장에 관한 대부분의 노력들은 정보통신기술을 교육활동에 효과적으로 활용할 수 있는 능력보다는 기술 소양 능력에 중점을 두고 있다. 본 연구에서는 교사의 정보통신기술 활용 능력에 관한 국내 외의 평가 도구를 비교 분석하고 각 도구의 장점을 바탕으로 교사의 정보통신기술 활용 능력 자기 평가 도구를 개발하였다. 본 평가 도구를 통해 실제 교수-학습 활동 지도 능력과 정보통신기술 활용 능력을 총체적으로 통합한 평가가 이루어질 수 있을 것이다.

• 대한치과보철학회지
• /
• 제43권4호
• /
• pp.528-543
• /
• 2005

Statement of problem: Repeated delivery and removal of abutment cause some changes such as wear, scratch or defect of hexagonal structure. It may increase the value of rotational freedom(RF) between hexagonal structures. Purpose: The purpose of this study was to evaluate surface changes and rotational freedom between the external hexagon of the implant fixture and internal hexagon of abutment after repeated delivery and removal under SEM and toolmaker's microscope. Materials and methods: Implant systems used for this study were 3i and Avana. Seven pail's of implant fixture, abutment and abutment screws for each system were selected and all fixtures were perpendicularly mounted in liquid unsaturated polyesther with dental surveyor. Each one was embedded beneath the platform of fixture. Surfaces of hexagonal structure before repeated closing and opening of abutment were observed using SEM and rotational freedom was measured by using toolmaker's microscope. Each abutment was secured to the implant future by each abutment screw with recommended torque value using a digital torque controller and was repeatedly delivered and removed by 20 times respectively. After experiment, evaluation for the change of hexagonal structures and measurement of rotational freedom were performed. Result : The results were as follows; 1. Wear of contact area between implant fixture and abutment was considerable in both 3i and Avana system. Scratches and defects were frequently observed at the line-angle of hexagonal structures of implant fixture and abutment. 2. In the SEM view of the external hexagon of implant fixture, the point-angle areas at the corner edge of hexagon were severely worn out in both systems. It was more notable in the case of 3i systems than in that of Avana systems. 3. In the SEM view of the internal hexagon of abutment, Gingi-Hue abutment of 3i systems showed severe wear in micro-stop contacts that were machined into the corners to prevent rotation and cemented abutment of Avana systems showed wear in both surface area adjacent to the corner mating with external hexagon of implant fixture. 4 The mean values of rotational freedom between the external hexagon of the implant fixture and internal hexagon of abutment were 0.48$\pm$0.04$^{\circ}$ in pre-tested 3i systems and 1.18$\pm$0.25$^{\circ}$ after test, and 1.80$\pm$0.04$^{\circ}$ in pre-tested Avana systems and 2.61$\pm$0.16$^{\circ}$ after test. 5. Changes of rotational freedom after test shouted statistical)y a significant increase in both 3i and Avana systems(P<0.05, paired t-test). 6. Statistically, there was no significant difference between amount of increase in the rotational freedom of 3i systems and amount of increase in that of Avana ones(P>0.05, unpaired t-test). Conclusion: Conclusively, it was considered that repeated delivery and remove of abutment by 20 times would not have influence on screw joint stability. However, it caused statistically the significant change of rotational freedom in tested systems. Therefore, it is suggested that repeated delivery and remove of abutment should be minimal as possible as it could be and be done carefully Additionally, it is suggested that the means or treatment to prevent the wear of mating components should be devised.