• Journal of Biosystems Engineering
• /
• v.4 no.1
• /
• pp.1-23
• /
• 1979

The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.

• KDI Journal of Economic Policy
• /
• v.32 no.2
• /
• pp.55-92
• /
• 2010

In terms of labor market accomplishments, such as income, size of the company, and the matching quality between one's job and college major (specialization), a very large discrepancy is observed between the graduates from colleges located in Seoul and those outside Seoul. But, when the department average score of the Scholastic Aptitude Test (SAT) at the time of college entrance is controlled for, the discrepancy is found to be reduced to a considerable degree. In the case of wage gap, at least two third can be explained by the SAT score gap. The remaining wage gap seems to reflect the characteristics of workplace. In other words, graduates with high SAT scores enter colleges located in Seoul and thus tend to find better jobs leading to earning differences. This result that confirms the importance of aptitude test scores suggests that in the labor market, one of the major reasons behind a lower accomplishment of the graduate from local colleges is due to a lower competitiveness of local colleges in attracting the brightest students. But, this should not be viewed as only an internal problem of local colleges. This is because the growth of local economies tends to haul the advancement of local colleges in that area rather than being the other way around. The agglomeration effect in Seoul where headquarters of large corporations and financial institutions gather is the factor that has elevated the status of colleges located in Seoul since this provides highly preferred job choices of graduates. When the competitiveness of college is significantly influenced by exogenous factors, such as the vicinity to Seoul, the effort being made by colleges alone would not be enough to improve the situation. However, the central government, too, is not in the position to carry out countermeasure policies for such problems. The regional development strategy boosted through supportive policies for local colleges, such as financial support, is not based on the persuasive and empirical grounds. It is true that college education is universal and that the government''s intervention in assisting local colleges to secure basic conditions, such as tenure faculty and adequate facilities is necessary. However, the way of intervention should not be a support-only type. In order to improve the efficiency and effect of financial support, restructuring programs, including the merger and integration of insolvent colleges, should be underway prior to providing support. In addition, when the policy is focused on education recipients-local college students, and not on education providers-local colleges, the importance of regional gap in compulsory education (elementary and junior high schools) turns out to be much important as the gap between metropolitan area colleges and local colleges. Considering the educational gap before college entrance shown from the discrepancies of aptitude test scores among different regions, the imbalance between regions in terms of human resources is apparently derived from compulsory education, and not from college education. Therefore, there is a need to double the policy efforts to reduce the educational gap among different regions. In addition, given the current situation where it is difficult to find appropriate ex post facto policy measures to solve the problem of income gap between the graduates from metropolitan colleges and local colleges, it can be said that improving the environment for compulsory education in local areas is a growing necessity for bridging the educational gap among different regions.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.6
• /
• pp.60-72
• /
• 2016

This study aims to suggest strategies of development and management for large parks by examining experimental cases of park governance models related to a shift away from public administration. The shifts towards governance as well as public-private partnership in city parks have involved the need for new public management. This study has analyzed two exemplary cases of Presidio Park and Sydney Harbour National Park in the aspects of planning process and management strategies, as the results derived the meaning and effect of park governance management and is also an essential prerequisite for the achievement of the model. There are six dimensions of research frames--namely policy, governance, partnership, finances and funds, design and maintenance-management, and evaluation-monitoring-taken as the basis for this study. Through the analysis, several key characteristics of these cases were elicited. First, the park planning process must be consistent in carrying a policy from planning to implementation, and furthermore, an independent operation body which can properly authorize an execution and uphold its responsibility from the public could serve in adaptable park services. Second, it has been suggested to build various partnerships with PAs and NGOs, private corporations, community groups, and academic institutes that allow it to expand the diversity of the park activities. Third, there has been experimental exploration to achieve a financially self-sufficient model by establishing internal revenue models and hence allow the reduction of reliance on public finances. The result of this type of park management would allow for improving park quality and make the park space a vital part of the local economy. Fourth, the strategies for a local community's participation are needed to allow the community to become a producer as well as a consumer. This study shows that the direction and significance of the park governance model regarding the fact that the plans sought by the two parks are extending the layout of public-centered discussion to the private sector and the third non-governmental sector including to the local community group. This shows both implications and limitations, such as the risk of privatization through non-governmental activities at the park or the violation of essential functions as a public good due to a profit-generating management policy for securing financial self-sufficiency. At the current point in which plans are under way for the development and management of large parks, a park governance model requires continuous study and expansion of discussion in the future.

• Journal of Life Science
• /
• v.25 no.2
• /
• pp.237-242
• /
• 2015

The use of calcite-forming bacteria (CFB) in crack remediation and durability improvements in construction materials creates a permanent and environmentally-friendly material. Therefore, research into this type of application is stimulating interdisciplinary studies between microbiology and architectural engineering. However, the mechanisms giving rise to these materials are dependent on calcite precipitation by the metabolism of the CFB, which raises concerns about possible hazards to cement-based construction due to microbial metabolic acid production. The aim of this study was to determine target microorganisms that possibly can have bio-corrosive effects on cement mortar and to assess multi-functional CFBs for their safe application to cement structures. The chalky test was first used to evaluate the $CaCO_3$ solubilization feature of construction sites by fungi, yeast, bacterial strains. Not all bacterial strains are able to solubilize $CaCO_3$, but C. sphaerospermum KNUC253 or P. prolifica KNUC263 showed $CaCO_3$ solubilization activity. Therefore, these two strains were identified as target microorganisms that require control in cement structures. The registered patented strains Bacillus aryabhatti KNUC205, Arthrobacter nicotianae KNUC2100, B. thuringiensis KNUC2103 and Stenotrophomonas maltophilia KNUC2106, reported as multifunctional CFB (fungal growth inhibition, crack remediation, and water permeability reduction of cement surfaces) and isolated from Dokdo or construction site were unable to solubilize $CaCO_3$. Notably, B. aryabhatti KNUC205 and A. nicotianae KNUC2100 could not hydrolyze cellulose or protein, which can be the major constituent macromolecules of internal materials for buildings. These results show that several reported multi-functional CFB can be applied to cement structures or diverse building environments without corrosive or bio-deteriorative risks.

• KOMUNHWA
• /
• no.70
• /
• pp.133-161
• /
• 2007

It is judged that celadons with '○' pattern and '⊙' pattern have the indication of manufacturer by engraving mark at the internal center of the bottom. These celadons were produced at No.8.23.27 kiln sites located at Sadang-ri(사당리), Daegu-myon(대구면), Gangjin-gun(강진군), Jeollanamdo(전라남도), Korea and '⊙’ patterned celadon porcelain was found only at No. 23 and 27 kiln sites, so it is assumed that its production sites were limited. Kinds of celadons included bowl, dish, cup, bottle, case and vessel for emptied wine and there were a lot of dishes with a variety of patterns. These celadons were engraved by molded design technique using the same ceramic design as the pattern of celadons in the period of their prosperity and it was appropriate method to produce celadons of a good quality with production method to keep decorative design like pattern or size uniformly. It was also found that inlay method was not universalized in this period and similar celadons were produced with molded design in large quantities. These celadons had partially fire clay temper, but most of them were burnt by supporting the inner bottom of U-type base with quartzite after whole glazing. It was known through relics excavated at Seokreung(석릉) royal tomb of King Heejong(희종) at Ganghwa(강화) and Hyeeumwon(혜음원) temple site at Paju(파주) and military house at Wakamiyaoji(약궁대로) avenue Kamakura(겸창)-city, Japan(일본) that these celadons were manufactured at two quarters of the 13th century centering around 1230s. Therefore, these celadons will be significant materials to fill the gap of the celadons in the 13th century resulted from the record chronologically that green celadons were manufactured in the 12th century. And this period was invaded by Mongolia(몽고), but central control was achieved and green celadons were continuously produced. It was also considered that these celadons were excavated at Gabgot-ri(갑곶리) and Gwanchung-ri(관청리), Ganghwa(강화), Hyeeumwon temple, Paju which played the role of temporary palace, Bu1guksa(불국사) temple at Gyeongju(경주), Silsangsa(실상사) temple at Namwon(남원) and relics of Jangheung(장흥) adjacent to Daeguso(대구소) and these were produced for high class.

• Journal of Korean Society of Forest Science
• /
• v.89 no.2
• /
• pp.275-284
• /
• 2000

This study was carried out to analyze the mechanical properties of soil and the slope stability on the fill slope of forest road constructed in the regions which consist of igneous and metamorphic rock area. The results were summarized as follows. 1) Soil type by Unified Soil Classification System(USCS) was classified as SW in soil slope, GP in weathered rock slope, GP in soft rock slope for both types of parent rock, but gravelly soil slopes in igneous and metamorphic rock area were classified as SP and GW, respectively. 2) Dry unit weight was $1.34g/cm^2{\sim}1.59g/cm^2$, specific gravity 0.57~0.61, and void ratio 0.66~0.93 in the case of igneous rock area, a dry unit weight was $1.35g/cm^2{\sim}1.51g/cm^2$, specific gravity 2.67~2.77, and void ratio 0.78~1.01 in the case of metamorphic rock area. 3) The strength parameters such as internal friction angle(${\phi}$) and cohesion(c) were selected and tested for slope stability analysis. ${\phi}$ and c of soil in igneous rock area were within the range of $29.51^{\circ}{\sim}41.82^{\circ}$ and $0.03kg/cm^2{\sim}0.38kg/cm^2$, respectively, and $21.43^{\circ}{\sim}41.43^{\circ}$ and $0.05kg/cm^2{\sim}0.44kg/cm^2$ in metamorphic rock area, respectively. 4) Result of the slope stability analysis of forest road showed that, in the weathered rock slope of igneous rock and the weathered rock and soil slope of metamorphic rock area, the possibility of slope failure was high as safety factor was below 1.0.

• Journal of Bio-Environment Control
• /
• v.27 no.3
• /
• pp.253-259
• /
• 2018

This study set out to select a system to realize an optimal environment for strawberry cultivation greenhouses based on data about the growth and development of strawberry and its environment and to provide basic data for the research of its improved productivity. For these purposes, the investigator conducted a field survey with greenhouses for strawberry cultivation in western Gyeongnam. The findings show that farmers in their fifties and sixties accounted for the biggest part in the age groups of strawberry farmers. While those who were under 50 were accounted for approximately 67.5%, those who were 60 or older accounted for 32.5%. As for cultivation experiences, the majority of the farmers had ten years of cultivation experiences or less with some having 30 years of cultivation experiences or more. All the farmers built an arch type single span greenhouse. Those who used nutrient solutions were about 75.0%, being more than those who used soil. All of the farmers that used a nutrient solution adopted an elevated hydroponic system. The single span greenhouses were in the range of 7.5~8.5m, 1.3~1.8m and 2.5~3.5m for width, eaves, and ridge height, respectively, regardless of survey areas. The rafters interval was about 0.7~0.8m. In elevated hydroponic cultivation, the width, height, and interval of the beds were about 0.25m, 1.2m and 1.0m, respectively. As for the strawberry varieties, the domestic ones accounted for approximately 97.5% with Seolhyang being the most favorite one at about 65.0%. As for the internal environment factors of greenhouses, 38 farmers measured only temperature and relatively humidity. As for hydroponics, the farmers used a hydroponics control system. Except for the farmers that introduced a smart farm system for temperature and humidity control, approximately 85.0% controlled temperature and humidity only with a control panel for side windows and ventilation fans. As for heating and heat insulation, all of the farmers were using water curtains with many farmers using an oil or electric boiler, radiating lamp or non-woven fabric, as well, when necessary.

• Investigative Magnetic Resonance Imaging
• /
• v.17 no.3
• /
• pp.207-214
• /
• 2013

Purpose : To evaluate the MRI findings of breast cancer with BRCA mutation. Materials and Methods: We collected information of the breast cancer patients who underwent the test for BRCA gene mutation as well as preoperative breast MRI from January 2007 to December 2010. A total of 185 patients were enrolled; 33 of these patients had BRCA mutations and 152 patients did not. Among them, a total of 231 breast cancers were detected. Images of the 47 breast cancers with BRCA mutation and of the 184 breast cancers without mutations were evaluated to compare the morphologic and enhancement features on MRI. Results: With MR imaging, there were no significant difference in morphologic characteristic between two groups. However, enhancement pattern in the group with BRCA mutation were more likely to have persistent enhancement (p < 0.233), and LN metastasis was more common in breast cancers without BRCA mutation. Breast cancers with BRCA 2 mutation tend to show more persistent enhancement pattern than BRCA 1 mutation. Conclusion: In breast cancer patients with BRCA mutation, MRI didn't show significant difference in morphologic characteristics, however breast cancers with BRCA gene mutation carriers tend to have benign morphologic features on MRI, such as Type 1 kinetic curve enhancement.

• Tuberculosis and Respiratory Diseases
• /
• v.39 no.6
• /
• pp.490-501
• /
• 1992

Background: Isocyanate is the most significant cause of occupational asthma in this country. The mechanism of isocyanate induced bronchoconstriction is unclear. Subjects and Method: To observe its immunologic and clinical findings, we performed methacholine bronchial challenge test (MBCT), toluene diisocyanate (TDI)-bronchoprovocation test (BPT) and RAST to TDI-, diphenylmethane diisocyanate (MDI)-, and hexamethylene diisocyanate (HDI)-human serum albumin (HSA) conjugate in 22 isocyanate-sensitive asthmatic workers. Results: BPT revealed early (11), dual (5), and late only (6) asthmatic responses. Their latent period ranged from 3 to 120 months (mean:45.9 months). Three cases (13.6%)showed a negative response on initial MBCT, but following MBeT performed 24 hours after TDI-BPT revealed the development of airway hyperresponsivenss. Twelve (54.5%) workers had increased specific IgE to TDI-HSA, seven (31.8%) had to MDI-HSA, and nine (40.9%) had to HDI-HSA conjugate. The prevalence of specific IgE was not associated with latent period, type of asthmatic responses, smoking, and atopic status. After 3 months' avoidance from workplace, airway hyperresponsiveness was improved in 10 (38.3%), among 12 followed cases. Conclusion: It is suggested that isocyanate can induce IgE-mediated bronchoconstriction in 59.1% of isocyanate-sensitive asthmatic workers. Isocyanate-induced asthma can occur even though MBeT showed a negative result, and measurement of the changes of airway hyperresponsivenss after isocyanate-BPT could be helpful to diagnose isocyanate-sensitive asthma.

• Journal of Life Science
• /
• v.21 no.9
• /
• pp.1301-1309
• /
• 2011

The major function of adipocytes is to store fat in the form of triglycerides. One of the signaling pathways known to affect adipogenesis, i.e. fat formation, is the WNT/${\beta}$-catenin pathway which inhibits the expression and activity of key regulators of adipogenesis. The purpose of this research is to find genes among the WNT/${\beta}$-catenin pathway which regulate adipogenesis by using small interfering (si) RNA and to find the association of single nucleotide polymorphisms (SNPs) of the gene with serum triglyceride levels in the human population. To elucidate the effects of ${\beta}$-catenin siRNA on adipogenesis key factors, PPAR${\gamma}$ and C/EBP${\alpha}$, we performed real-time PCR and western blotting experiments for the analyses of mRNA and protein levels. It was found that the siRNA-mediated knockdown of ${\beta}$-catenin upregulates adipogenesis key factors. However, upstream regulators of the WNT/${\beta}$-catenin pathway, such as DVL2 and LRP6, had no significant effects compared to ${\beta}$-catenin. These results indicate that ${\beta}$-catenin is a candidate gene for human fat accumulation. In general, serum triglyceride level is a good indicator of fat accumulation in humans. According to statistical analyses of the association between serum triglyceride level and SNPs of ${\beta}$-catenin, -10,288 C>T SNP (rs7630377) in the promoter region was significantly associated with serum triglyceride levels (p<0.05) in 290 Korean subjects. On the other hand, serum cholesterol levels were not significantly associated with SNPs of the ${\beta}$-catenin gene. The results of this study showed that ${\beta}$-catenin is associated with fat accumulation both in vitro and in the human population.