In recent years, the study about the high efficiency and low fuel consumption of the internal conbustion engine has been mainly proceeding. To achieve these goals, the improvement of combustion process in Sl engine and the use of substitute energy are suggested. When the methanol blend fuel Is used, the combustion rate of the initial ignition is diminishing by high latent evaporation of methanol. But it attracts the attention because of the high octane number, and lean mixture peculiarity. Considering these facts, the gasoline-methanol blend fuel In engine operation has been used to compare and analyze the pressure development, rate of heat release, mass burned fraction, and combustion process. The results of experiment show the power increase, lean combustion and low harmful component of emission.
저자들은 경부 동통과 촉진시 공기 마찰음, 기침을 주소로 내원한 종격동 기흉환자를, 흉부 컴퓨터 촬영 및 개흉 폐조직 검사로 임파구형 간질성 폐렴으로 진단하였다. 또한 동반된 자가면역 질환이나 면역 부전 상태의 유무를 알기 위하여 다양한 혈청학적 검사를 시행하였으며, 그 결과 원발성으로 발생한 임파구형 간질성 폐렴임을 알수 있었으며, 치료적 목적으로 스테로이드 투여를 시도하였으나 임상 양상에 큰 호전을 보이지 않아 세포 독성 약제등의 투여를 고려 중이다. 그러나, 현재까지 확립된 병인 기전이나 치료 방법등에 대한 정설이 없으며 최근 AIDS 환자들에게서의 발생이 많이 보고됨에 따라 이 질환의 원인 및 경과를 예측할 수 있는 지표등에 대한 연구가 계속 되어야 할 것으로 생각된다.
The effect of annealing on the pitting corrosion resistance of anodized Al-Mg alloy (AA5052) processed by equal-channel angular pressing (ECAP) was investigated by electrochemical techniques in a solution containing 0.2 mol/L of $AlCl_3$ and also by surface analysis. The Al-Mg alloy was annealed at a fixed temperature between 473 and 573 K for 120 min in air after ECAP. Anodizing was conducted for 40 min at $100-400A/m^2$ at 293 K in a solution containing 1.53 mol/L of $H_2SO_4$ and 0.0185 mol/L of $Al_2(SO_4)_3$. The internal stress generated in anodic oxide films during anodization was measured with a strain gauge to clarify the effect of ECAP on the pitting corrosion resistance of anodized Al-Mg alloy. The time required to initiate the pitting corrosion of anodized Al-Mg alloy was shorter in samples subjected to ECAP, indicating that ECAP decreased the pitting corrosion resistance. However, the pitting corrosion resistance was greatly improved by annealing after ECAP. The time required to initiate pitting corrosion increased with increasing annealing temperature. The strain gauge attached to Al-Mg alloy revealed that the internal stress present in the anodic oxide films was compressive stress, and that the stress was larger with ECAP than without. The compressive internal stress gradually decreased with increasing annealing temperature. Scanning electron microscopy showed that cracks occurred in the anodic oxide film on Al-Mg alloy during initial corrosion and that the cracks were larger with ECAP than without. The ECAP process of severe plastic deformation produces large internal stresses in the Al-Mg alloy; the stresses remain in the anodic oxide films, increasingthe likelihood of cracks. It is assumed that the pitting corrosion is promoted by these cracks as a result of the higher internal stress resulting from ECAP. The improvement in the pitting corrosion resistance of anodized AlMg alloy as a result of annealing appears to be attributable to a decrease in the internal stresses in anodic oxide films
자동차 보유의 증가로 수도권 지역에서 인구가 출 퇴근하는 행태가 자동차이용형으로 급변하는 현실에서 자동차를 받아들일 수 있는 인프라가 대단히 열악하다. 교통수요관리 정책이 시행됨에도 불구하고 여전히 많은 통행이 나타나고 있으며, 이에 상응하는 국내 외 연구는 미미한 실정이다. 이에 본 연구에서는 현재 국내 외에서 시행되고 있는 교통수요관리 정책을 선정하여 설문조사를 실시하였다. 이 설문조사를 바탕으로 AHP(Analytic Hierarchy Process)분석을 수행하여 국내 외에서 시행되고 있는 교통수요관리 정책을 비교하여 우위를 정하고 이용자들이 느끼는 각 항목별 중요도와 만족도를 파악하였다. 또한 AHP분석 기법을 통하여 얻어낸 항목별 중요도와 만족도를 바탕으로 각 교통수요관리 정책 특성을 비교하였다. 마지막으로 본 연구를 통해 파악된 요인들로 현재의 현황을 분석하고 앞으로의 교통수요 정책 방향을 정립하여 향후 교통여건개선에 활용하고자 한다.
The goal of this study is to present efficient measures to improve the quality of medical education through using a developed and applied continuous quality improvement (CQI) model suitable for medical education. To achieve this purpose, we developed a theoretical CQI model through a review of the literature according to the design-based research method. Through repetitive productive cyclical processes and professional reviews, we finally deduced an appropriate CQI model for medical education. The most important results of this study are as follows: First, the CQI model for medical education is defined as a quality management system with a cyclical course of planning, implementation, evaluation, and improvement of medical education. Second, the CQI model for medical education is composed of quality management activities of educational design, work, and evaluation. In addition, each activity has the implementation strategies of planning, doing, checking, and improving based on the PDCA model (Plan-Do-Check-Act model). Third, the CQI model for medical school education is composed of committees related to medical education doing improvement activities, as well as planning, implementing and evaluating it with CQI. As a result, we can improve teaching by using the CQI model for medical education. It is more meaningful because this gives us organized and practical measures of quality management and improvement in medical education as well as in the educational process.
최근에는 프로세스 마이닝의 최대 강점을 활용함으로써, 기업 조직의 감사 업무에 적극적으로 활용하기 위한 다양한 연구 활동이 활발히 진행 중에 있다. 한편 기업 조직의 중요한 경영 활동중의 하나인 구매 부문 감사 시 빅 데이터 환경 하에서 생성된 방대한 데이터를 프로세스 마이닝을 이용하여 체계적이고 효율적으로 분석하고 감사 측면에서 위험 관리 사전 모니터링 하는 관련 연구는 미흡한 실정이다. 본 연구에서는 기업현장에서 발생되는 대량의 데이터들을 단순하게 사후에 모니터링하는 수준에서 벗어나 기업의 구매 부문에서 이상 징후들을 사전에 탐지하고 사고를 미리 방지하기 위하여 하둡 기반의 내부 감사 통합 실시간 모니터링 시스템을 구현하고자 한다. 이렇게 구현된 시스템을 통해 발주한 구매 자재의 납기관리 강화, 구매원가 절감, 경쟁력 있는 협력업체 관리, 사기 발생 억제, 규정준수, 내부통제 회계제도 준수 및 강화를 실현하고자 한다. 이러한 목적을 달성하기 위해 프로세스 마이닝을 이용하여 데이터를 효율적으로 분석하고 하둡기반의 시스템을 구축함으로써 이 결과로 구매감사 통합 실시간 모니터링 방식을 활용하여 실시간으로 실행할 수 있는 정보 제공이 가능하게 되었다. 또한, 통합적인 관점에서 입체적으로 업무 상태를 관리할 수 있게 되었고, 상시 모니터링 보다 대량의 작업을 실시간에 빠른 속도로 처리하게 됨으로써 구매 감사 품질개선 및 구매 프로세스 혁신의 효과가 나타났다.
SCM(Supply Chain Management) have been introduced in many companies for integrated management and improvement of business process. Recently, as internet and e-business concept are spread globally, the SCM concept is expanded from one internal company process to inter-company process, it makes a Global SCM concept. In this paper, we discuss the implementation of the Global SCM concept using e-business infrastructure, and propose SCM portal models. Four types of the SCM portal model are discussed, which are forecasting information sharing model, e-Marketplace-typed model, collaboration model and logistics information sharing model. The major concept of the SCM portal is to share information of supply chain process, it provide merits of scale to company. The result of this paper can be summarized as follows : First, the information sharing is very useful in the Global SCM. Second, the e-business infrastructure, especially e-Marketplace can be usefully used for implementation of SCM portal. Third, the M2M(Market to Market) function of e-Marketplace is a major function for implementing SCM portal.
This study is a descriptive analytic research measuring nursing service quality, using SERVQUAL model, to make fundamental data and strategies for nursing service improvement. Data were collected by self-reported questionnaire from 202 patients and 142 nurses, from June 7 to 14, 1999. The reliability of instrument were adequate(Cronbach ${\alpha}=.94$). SAS program was utilized for statistical analysis of collected data. The results were as follows; 1. There was a gab between patient's expectation and perception on nursing service(Gap B). Gap D was indicated an affecting factor to decide nursing service quality. Gap C was indicated an indirect affecting factor of nursing service quality. Because it was not statistically significant in total item analysis, but in individual item analysis, 7 items were appeared statistically significant. Gap A was not a gap occurrence factor of nursing service quality. 2. Focuses of nursing service quality improvement strategies were; (1) to direct qualitative improvement of nursing service in order to correspondence patient's nursing service expectation. (2) to make nurse's service activity modified because nurse's practice were not reached patient's expectation level. (3) to need internal, external factor analysis affecting nurse's service activity. 3. Nursing service quality was decided by rather environmental inappropriateness provided nursing service than itself. Therefore, to make nursing service quality improvement, it is required to improve nursing service environment. For this, followings are required; (1) to strengthen nurse's education on lower part of nursing service satisfaction and QI activities. (2) to balance demand and supply of nursing personnel. 3) to fix computerized system for reducing other duties weight except nursing care through analysis of nursing activity. (4) to construct rational cooperating system among related departments. 4. The important parts for nursing service quality improvement were indicated as follows: (1) Gap B: 'prompt reaction', 'examination symptom before patient's complaint', 'hearted nursing service reducing patient's dissatisfaction', 'explanation goals of nursing activities', 'having special Knowledge enough', 'maintenance position comfortably', 'management of patient's physical hygiene'. (2) Gap C: 'maintenance physical safety', 'explanation about hospital rules and facilities'. (3) Gap D: 'tender, safe injection and wound care'. Because above items are mostly improved through nurse's attitude change and quality improvement, it is required to establish nursing standardization and to strengthen nurse's clinical education. As the based on above results, followings are suggested; 1. SERVQUAL model is very useful to make strategies for nursing service quality improvement because it indicates multiple factors affecting hap occurrence. 2. At individual items analysis of Gap C, statistically significant 7 items appeared higher nurse's perception level than patient's perception level on nursing service were trouble perception level on nursing service quality improvement. So. it need further research to analysis about these difference occurring factors. 3. At analysis of Gap D, it is indicated that in nursing service performance process, multiple factors lowing nursing service quality were intruded. So it needs further research to analysis what these factors are and how each factors affect on nursing performance process. 4. nursing service quality measurement is changeable according to sample select time or sampled subject's characteristics. So to develope strategy for nursing service quality improvement is based on the results of periodical analysis.
기술혁신 활동은 기업이 기술경쟁력을 확보하고 지속적으로 성장하기 위해 매우 중요한 활동이다. 우리나라는 기업의 혁신활동을 촉진하기 위하여 국가차원에서 인증제도를 운영하며, 중소기업의 글로벌 기술경쟁력 제고를 위해 노력하고 있다. 이 가운데 기술혁신과 관련된 대표적인 제도가 신기술(NET) 인증이다. 신기술 인증제도는 엄격한 3단계 심사과정을 거쳐 인증하고 있으며, 기업의 신기술 상용화, 기술거래 및 초기시장 진출 촉진 등을 목적으로 운영되고 있다. 신기술 인증을 획득했다는 것은 해당 기업이 일정 수준 이상의 기술경쟁력을 확보하고 있다는 것을 의미한다. 이에 본 연구에서는 신기술 인증제도를 중심으로 기업의 어떠한 기술혁신활동이 R&D프로젝트 성공과 경영성과 제고에 영향을 미치는 지에 대한 실증분석을 수행하고자 하였다. 이를 검증하기 위해 주요변수로 기술전략, 기술기획, 체계화된 R&D프로세스, 내부협력, 외부협력 활동을 설정하였다. 실증분석 결과, 본 연구에서 설정한 변수 모두 개별적으로 R&D프로젝트 성공과 경영성과 제고에 기여함을 확인하였다. 다만, 모든 변수를 고려한 종합적인 차원에서 살펴보면, R&D프로젝트 성공을 위해서는 체계화된 R&D프로세스 관리와 외부기관과의 협력 활동이, 경영성과 제고를 위해서는 연구개발 초기 단계인 기술전략 수립과 기술기획 활동이 통계적으로 유의미한 영향을 미치는 것으로 분석되었다. 본 연구는 기업부설연구소를 설립·운영하고 있으며, 활발히 연구개발(R&D) 활동을 수행하고 있는 혁신지향적인 중소기업을 대상으로 하였으며, 분석방법으로는 다중회귀분석을 활용하였다.
To suggest future directions for the improvement in the Institutional Review Board (IRB) review process and efficient operation of IRB, we have analyzed the IRB review results from 460 new research proposals submitted to the Review by the Convened IRB of the Keimyung University Dongsan Hospital IRB from January 2019 to July 2021. IRB is an independently established institutional committee to protect the human subjects by reviewing the research protocol in ethical as well as scientific aspects, so it is necessary to continuously contemplate the ethical versus scientific dilemma of 'what is ethical or scientific and what can actually protect human subjects.' Particularly, in this process, it is necessary to consider diverse ways to strengthen self-supervision through continuous Internal Audit rather than simple reporting outcomes. In addition, if it does not directly affect the protection of the human subjects, the discussion with the committee members is needed so that the comments such as administrative and typographical errors can be reduced as much as possible. Furthermore, as statistical analysis methods can have a significant impact on the safety of human subjects, if a legal basis and/or support related to statistics is provided for the composition of IRB members, a more specialized IRB review will be achieved.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.